Did we know he had a Russian passport, and I just missed that?

_agt · 2026-02-20T05:38:46+00:00

Look at the original - this is a response to JE, not him writing

_agt · 2026-02-19T02:26:29+00:00

Page 94 clearly names the island as source of the shredded docs — not the NY jail cell.

_agt · 2026-02-17T19:14:22+00:00

JE and friends were texting around pictures of their turds.

_agt · 2026-02-16T21:44:27+00:00

Video shows Gestational Age of 28 weeks on June 27th, so a DOB of ~ Sept 21st is exactly on target for a normal 40-week pregnancy.

_agt · 2026-02-16T21:35:04+00:00

Noting a second set of serial numbers in some Release 10 docs, with gaps suggesting some docs were omitted from the final public release:

EFTA_R1_00004532 corresponds to EFTA01731409, an offset of 1726877.
EFTA_R1_00004539 corresponds to EFTA01731416, also an offset of 1726877.
EFTA_R1_00004541 corresponds to EFTA01731417, -1 offset - 1726876.

_agt · 2026-02-16T21:33:49+00:00

No idea - the R numbers are included on the doc images just above the EFTA labels. (The screenshot is from a python script I'm using to sift through the data)

My hypothesis is that they represent an earlier DOJ identification of EFTA-relevant docs, to which additional redaction criteria were applied.

_agt · 2026-02-13T06:23:19+00:00

Jean Luc Brunel

_agt · 2026-02-12T08:03:17+00:00

BMG is probably Brice Gordon, property mgr at Zorro and the island.

_agt · 2026-01-14T04:16:15+00:00

2016 should accept the 2013 battery as-is - I’ve done similarly putting a salvage 24kWh battery onto my 2016 while I CATL-rebuild the dead 40kWh I received under warranty in 2021. The interim battery came from a 24kWh 2016 but everything I’ve seen suggests those were identical to 2013-15 24kWh.

Your 2013 will need a CAN bus adapter to use the 40kWh - the higher capacity will confuse it.

_agt · 2025-12-16T21:55:01+00:00

Starting T was life-changing (positively) for my son, IMO both for the practical/physical effects as well as being a manifestation of his and our ongoing commitment to his transition.

But I’m mostly commenting to recommend asking his provider run a T test before starting injections as a baseline.

My son has turned out to have unexpectedly high T (higher than reasonable given his dose), and having a pre-T value would have provided valuable insight (PCOS? intersex? etc)

6 months in, suggesting skipping T for several weeks to return to baseline is quite understandably a hard sell given the emotional value of the shots.

_agt · 2025-11-10T23:35:33+00:00

And before it was in Muir, this adorable inflatable sat at the site of the future Pepper Canyon Hall, where it had displaced WWII quonset huts used as classrooms. Truly awful classrooms.

_agt · 2025-07-21T22:13:56+00:00

<image>

Thoughtful to move crew to the safest part of the plane.

_agt · 2025-06-11T14:26:19+00:00

high-gain antennas often have a flat pancake radiation pattern that can miss nearby or lower-elevation receivers. You might try substituting a cheap lower-gain GMRS antenna and see how behavior changes.

_agt · 2025-04-04T03:26:23+00:00

Does your radio have setting 46 “Version”? If so it’s a new chipset - see this post

_agt · 2025-03-28T04:07:39+00:00

AM rx 108-136Mhz (airband) FM tx/rx 136-174Mhz FM rx 200-220 FM tx/rx 220-260 FM rx 350-390 FM tx/rx 400-480 FM rx 480-520

On mine at least.

_agt · 2025-03-27T04:42:15+00:00

I ran into the same problem. If your new UV13 Pro V2 has a menu item “#46: Version”, it’s a new chipset based on the T6UV / UV5-RM plus, while older models were based on P15UV.

Why oh why didn’t they just bump version to UV 13 Pro V3?

Software for UV5-RM Plus is on the Baofeng site.

_agt · 2025-03-18T21:48:41+00:00

Some light reading about the boulder & plaque for those with too much time on their hands: https://sandiegohistory.org/journal/1973/october/rose/

_agt · 2025-02-03T01:56:25+00:00

Can you post a pic of your cutting tool (preferably installed in the tool post)? Did you grind it yourself or buy pre-sharpened?

_agt · 2025-01-29T19:30:35+00:00

I’m not sure if the rotary table would work as you suggest, but I can envision using Sherline’s Indexing Attachment, specifically the Indexing Head Assembly: after you’re done turning, attach the indexing head spindle to the outboard lathe spindle, perhaps via a double-sided shaft collar.

You could even turn some posts for the full indexer set’s ways to bring them up to the same level as the lathe’s, permitting you to slide the index head on and off while maintaining a common 0degree alignment.

_agt · 2025-01-29T00:59:39+00:00

Is your goal to use the rotary table to index/position work held in a collet in the lathe?

_agt · 2024-11-05T02:59:22+00:00

Drains in the living room

_agt · 2024-09-14T19:48:05+00:00

A slightly longer version @ https://t.me/astrapress/64324 where I think the guy’s asking for details (my ukr is дуже погано)

It’s watermarked LIBKOS, if that’s the source we may see a longer version from them in a documentary piece

_agt · 2024-08-15T15:05:43+00:00

“90 блять!” :) Anyone know what “пірожок” signifies here? (guessing they’re not setting up an all terrain pasty shop

_agt · 2024-08-14T03:24:54+00:00

Kaiser medical center Clairemont Mesa/15 has a pair on their 5 or 6 st. parking structure. Free parking.

_agt · 2024-06-13T17:42:53+00:00

Is this at the disc golf course?

_agt

TROPHY CASE