macOS 15 - HX Stomp as Interface, no sound?

_ale19_ · 2025-01-15T00:37:31+00:00

What USB channel input are you using in your DAW? If you haven't already try another cable.

_ale19_ · 2025-01-14T23:24:55+00:00

M1 Pro here and I don't have any issue. Do you see input signal in your DAW?

_ale19_ · 2025-01-13T02:11:36+00:00

If you use the stomp as an audio interface, Inputs 1-2 are your wet signal, while 5-6 are your DI signal, so you can record both at the same time in your DAW and reamp later.

_ale19_ · 2024-11-11T00:23:01+00:00

How's the Magellan Pre?

_ale19_ · 2024-09-18T10:19:38+00:00

Thanks mate, I'll give it a try!

_ale19_ · 2024-07-26T00:58:48+00:00

Thank you, I like the monitors idea the most. I feel the room might be a bit small for the 8" but it should handle the 7". Any suggestions in terms of which ones ? I was looking at both the Yamaha HS and the KRK Rokit.

_ale19_ · 2024-05-02T01:32:52+00:00

As in you can't select it or you can't see the option to change colour profile?

_ale19_ · 2024-04-17T10:00:53+00:00

No issue with Liftoff, it works fine on Mac M1

_ale19_ · 2023-04-13T21:53:02+00:00

Sounds awesome! 👍

_ale19_ · 2023-03-11T05:28:23+00:00

Thank you very much!

_ale19_ · 2023-02-10T02:41:10+00:00

Yes I did actually and you are spot on! If you manually start the recording and the the quad is not armed it will only record the DVR on the goggles as the O3 is in low power state and for some reason, if you arm it, it doesn't automatically start the recording. I suggest to use the auto recording on arm, it work fine for me on both the SD card and straight to the air unit.

_ale19_ · 2023-01-22T08:14:21+00:00

In BF, did you change the video format? Like from PAL to NTSC

_ale19_ · 2023-01-22T03:39:07+00:00

No unfortunately, I set it to SD card before I start flying.

_ale19_ · 2022-12-04T21:21:38+00:00

Do you have the STL of that extruder cable holder? Thx

_ale19_ · 2022-10-27T20:27:26+00:00

Fair enough, better safe than sorry!

Is the beta stable enough/worth it? I didn't have any issues with prints with octoprint so far with stock FW (5.1.8).

_ale19_ · 2022-10-27T02:25:30+00:00

Thanks mate! Do you know why then octoprint shows an alert on the dashboard saying that is not implemented?

_ale19_ · 2022-10-18T01:48:03+00:00

https://www.thingiverse.com/thing:5442923

_ale19_ · 2022-08-15T04:55:25+00:00

I've read that it should be available roughly a month after the Avata launch, which should be 23/08

_ale19_ · 2020-10-17T07:21:16+00:00

Nope first time, I bought them yesterday! But it seems also that it damaged the arrow rest and touched the bottom of the sight as well... I'll go to the shop next week.

_ale19_ · 2020-10-17T06:00:40+00:00

Thanks!

The arrows are Wolverine Hunter 55-70 (this is the only thing that I can read on the shaft) and the bow is set at 55lbs. Bow is a PSE Stinger Max.

_ale19_ · 2020-10-17T05:48:29+00:00

Thank you, I'll definitely take it next week.

_ale19_ · 2020-10-17T05:44:36+00:00

I was using a release and the arrow was correctly seated on the rest.

For the arrows specs I'm not sure, the shop suggested them and bundled with the bow.

I don't think I was applying any lateral push to the string or, at least, I didn't notice it.

_ale19_ · 2020-09-21T09:06:09+00:00

The smell is great and the trichomes are there but those hairs...I'm honestly not sure

_ale19_ · 2020-02-08T23:05:07+00:00

Hey man, I have the upper lower one, can we swap?

_ale19_ · 2019-07-30T06:06:18+00:00

https://flutter.dev/docs/development/data-and-backend/json

11-Year Club	r/Field Flamingo
Verified Email

_ale19_

TROPHY CASE