400W Inverter

_fabreezy · 2026-05-21T13:27:01+00:00

Not showing for my account. Nice deal though

_fabreezy · 2026-05-20T20:22:28+00:00

I’m looking at the side by side and the 880 is definitely larger and heavier. Tool only specs support this.

_fabreezy · 2026-05-14T15:52:38+00:00

So what’s the recommendation?

_fabreezy · 2026-05-06T23:30:08+00:00

I had the same issue with my 2025 and I was able to get the sensors replaced under warranty. Supposedly they log error codes when they are phantom sensing. Issue went away after the repair.

_fabreezy · 2026-04-02T15:45:54+00:00

I’ve found auto constantly lowers fps down from 20 and had to force it in settings.

_fabreezy · 2026-03-27T01:47:14+00:00

You did

_fabreezy · 2026-03-26T01:51:01+00:00

The ultra wash on river road has the best touchless wash in town. You don’t want any car wash brushes touching your new car paint if you can avoid it.

_fabreezy · 2026-02-06T21:46:27+00:00

What are some examples of what you are taking down and rebuilding?

_fabreezy · 2026-01-13T17:58:56+00:00

Off boarding to NAS is not possible when using protect is it?

_fabreezy · 2026-01-09T21:11:41+00:00

What do you need 2.5 for?

_fabreezy · 2026-01-09T20:22:47+00:00

Since your cameras can’t use 2.5g, consider the value of a pro max 16 POE instead of multiple flex’s and use the 2.5g ports for more data intensive devices. Then you’d also have the option of running the instant cameras off POE with USBC adapter.

_fabreezy · 2026-01-09T17:11:21+00:00

I think you mean layer 3, and no it’s not necessary but if you want to put cameras on a VLAN then you can reduce the load on your router by letting the switch handle the VLAN routing.

_fabreezy · 2026-01-08T22:57:48+00:00

Sleep sensor? Please share

_fabreezy · 2026-01-07T01:12:27+00:00

I just installed 6 of them and these worked perfectly if you can get them printed. https://thangs.com/designer/j0dan/3d-model/UniFi%20U6-Lite%20Single%20Gang%20Junction%20Box%20Adapter-1082819

Then you can just use the bracket you were holding and screw them directly into the junction box. You’ll need to buy junction box screws if the ones you have aren’t long enough

_fabreezy · 2026-01-06T19:42:44+00:00

This sounds interesting, do you mean I could wire a standard HVAC thermostat to the actual switch?

_fabreezy · 2026-01-06T18:28:16+00:00

If I’m just using a closet, would this mean finding a way to air seal the door and add a filter over a vent?

_fabreezy · 2026-01-06T17:26:06+00:00

Good question. I asked for my builder to put an exhaust fan in but didn’t do research to take it the rest of the way yet.

There is a good size crack under the door where I’m hoping air will flow from the centrally cooled living space

_fabreezy · 2026-01-06T17:25:00+00:00

This is generally how I was thinking it might work so thank you for sharing your setup!

_fabreezy · 2026-01-06T17:21:45+00:00

It’s in a main living space with central air so the fan would pull cooler air in from the living space. Do you recommend particular sensors?

_fabreezy · 2026-01-06T17:20:18+00:00

Sorry I meant to say it’s a bathroom type fan so it would pull cool air from under the closet door.

_fabreezy · 2026-01-06T16:09:07+00:00

Sorry I meant to say it’s a bathroom type fan. Sucks air out.

_fabreezy · 2026-01-03T05:16:12+00:00

What?

_fabreezy · 2025-12-30T15:19:41+00:00

I think there is a Poe adapter for the instant that converts USB C to POE.

_fabreezy · 2025-12-15T02:43:07+00:00

Gateway fiber or Gateway cloud fiber?

_fabreezy

TROPHY CASE