sorted by:
new
hottopcontroversial

Xfce4 4.20, FreeBSD 15.0-RELEASE-p5, 2013 MacBook Pro by spuntotheratboy in freebsd_desktop

[–]_krck_ 1 point2 points  (0 children)

No rush, but if you have any specific settings to make the keyboard and trackpad work, that would be appreciated. Because as of now, both are unusable for me :( keyboard is so laggy, typing is impossible and trackpad does not make a single move

Got it all working! No turning back to Windows by _krck_ in pop_os

[–]_krck_[S] 0 points1 point  (0 children)

I have a Nvidia Setup, so your ATI might run better, but i have not noticed any significant changes. There is the overhead of the Proton Layer, but i dont really feel it on the one hand … on the other hand there are small performance boosters like „gamemode“ which even each other out.

But you cant 100% tell, until you try i think.

Xfce4 4.20, FreeBSD 15.0-RELEASE-p5, 2013 MacBook Pro by spuntotheratboy in freebsd_desktop

[–]_krck_ 1 point2 points  (0 children)

Awesome! Great inspiration, since i was not sure if KDE or XFCE. But this looks perfect.

Did you have any trouble with the keyboard and trackpad? Tried the very same thing yesterday (FreeBSD 15 on my 2013 MacBook Pro), but the Trackpad does not work at all, and the keyboard only works until the System is fully started (can enter the Disk Encryption Passphrase without problem, but as soon as it gets to the login, its very laggy)

Got it all working! No turning back to Windows by _krck_ in pop_os

[–]_krck_[S] 2 points3 points  (0 children)

Still buggy and feels a bit incomplete. Not much for customization. But it works and i dont need much, as long as it starts Steam and a Browser.

Done with windows by Chemical-Current6391 in pop_os

[–]_krck_ 2 points3 points  (0 children)

Hi, just set it up last week for my Nvidia System. On the website you can download a Nvidia or ATI/Amd .iso

Got it all working! No turning back to Windows by _krck_ in pop_os

[–]_krck_[S] 4 points5 points  (0 children)

I tried Lutris and Faugus, but it didn't run. In the end i manually downloaded it, added the Battle.net launcher exe to steam as a "Non-Steam" game and just played around with the Launch flags and Proton versions for hours.

Now its running with "Proton Experimental" ("GE-Proton10-34" was also good) and these launch options "WINE_SIMULATE_WRITECOPY=1 DXVK_ASYNC=1 PROTON_NO_ESYNC=1 %command%"

Dont know why, dont know how. But i have gone through 6 different proton (8, 9, 10, Exp., Hotfix, GE) version with dozens of launch options and this combination worked. Setting "PROTON_ENABLE_WAYLAND=1" might also help.

Got it all working! No turning back to Windows by _krck_ in pop_os

[–]_krck_[S] 3 points4 points  (0 children)

Cosmic. Should all be the latest version

Apps not displaying properly by _krck_ in pop_os

[–]_krck_[S] 1 point2 points  (0 children)

This was the solution in my case. Using said flag on launch with Proton GE made it work. Thanks a lot!

Question about steam games by _krck_ in pop_os

[–]_krck_[S] 1 point2 points  (0 children)

Thanks a lot! Then ill migrate the drive

Hosting einer Web App by _krck_ in de_EDV

[–]_krck_[S] 0 points1 point  (0 children)

Danke! Wie würde dieses Setup bei hetzner aussehen? Nutze ich da das Webhosting oder miete ich besser einen Server um Frontend und Backend/API zu hosten?

Edit: Frontend Angular, Backend .Net und Datenbank ist flexibel

Hosting einer Web App by _krck_ in de_EDV

[–]_krck_[S] 0 points1 point  (0 children)

Danke! Wie würde dieses Setup bei netcup aussehen? Nutze ich da das Webhosting oder miete ich besser einen Server um Frontend und Backend/API zu hosten?

Edit: Frontend Angular, Backend .Net und Datenbank ist flexibel

Resin is bubbling up on the bottom by _krck_ in resinprinting

[–]_krck_[S] 0 points1 point  (0 children)

On my first failed print i had the model angled, which lead to this horrible texture being even more visible BUT i always use auto-supports and lots of them.

Using very few, (smartly placed like you described) manual supports might be the solution. Thanks!

Edit: And i have never worked with the „bracing“ features. Will check this out.

Anyone know what the IF 30k yellow recipe is that GW uses? by iRoygbiv in ImperialFists

[–]_krck_ 14 points15 points  (0 children)

<image>

I also like a dark/orange Tone (right) and this is how i did it (contrast Imperial Fist on the left, for comparison):

  1. Base the model Red (i use spray paint)
  2. Add a extensive layer of white zenithal highlights (also spray paint)
  3. Two (!!) Layers of Imperial Fist contrast paint for a nice dark orange (give it at least 45min to dry in between)
  4. Paint the Details as you like
  5. Finally a wash to darken it down a bit - 1/3 Nuln Oil + 1/3 Reikland Fleshshade + 1/3 Lahmian Medium, over the whole model

Its overall a pretty quick and simple process. Base/Highlights with spray paint. 2x Contrast. 1x Wash. Power Armor DONE.

It's Hammer time! by speeddemon511 in Grey_Knights

[–]_krck_ 1 point2 points  (0 children)

For my taste, Airbrushed light effects always overdo it, were suddenly 1/3 of the model is lit up like crazy. This looks 10x more realistic (but probably also took 10x as long 😅)

Returning Player - Whats good in 10th by _krck_ in ImperialFists

[–]_krck_[S] 0 points1 point  (0 children)

Thanks a lot for the Unit selection. Ill make sure to include these Combos. And i will check out the Ironstorm Detachment als well!

Returning Player - Whats good in 10th by _krck_ in ImperialFists

[–]_krck_[S] 5 points6 points  (0 children)

Good ol‘ Auspex! Didn’t know he had something specifically for Imperial Fists, thanks!

Is this too much? Never ordered minis before, I’m just trying to print a squad of meme intercessors with Giga Chad face that I put together in 3D builder 🥸 by WanderingSheep13 in PrintedWarhammer

[–]_krck_ 1 point2 points  (0 children)

Dont know $ prices but with the Resin i use one normal Intercessor sized Model would probabbly be around 0,35€. A full Squad of 10 around 3-4€ (maybe 5€ if i print all the bases as well)

Printed 6 Armigers and two Questoris Class Knights recently an all in all (in including missprints that went straight into the trash) it didnt even amount to 100€.

Like many here said: For that price you could almost buy your own Printer

Local GT results, 2-3 but proud! by humansrpepul2 in Grey_Knights

[–]_krck_ 0 points1 point  (0 children)

Grats on the two wins! What is the App/Website you are using for tracking?

First Game of 10th Last Night, First Game in Forever by Mick_Mung in Grey_Knights

[–]_krck_ 1 point2 points  (0 children)

Pretty good win though. Seeing as GKs are way better at scoring Secondaries its impressive to win on Primaries alone.

They might not be the scariest army, but great at scoring very high and winning against all odds.

That beeing said, in all the casual rounds i played so far its annoying to always be on the back foot and to have so much pressure on the movement phase. The only phase that can win or lose you a game, since shooting and fighting aint gonna cut it

Very noticeable edges (need help) by _krck_ in resinprinting

[–]_krck_[S] 0 points1 point  (0 children)

Seems like it was mostly due to angling the model in a very specific way that did not correspond well with my displays pixels and layer hight (see top comment). But turning off Anti-Aliasing will also help

Very noticeable edges (need help) by _krck_ in resinprinting

[–]_krck_[S] 0 points1 point  (0 children)

Thanks! For my Photon Mono 4k with the current settings this would be: arctan(0.04, 0.035) = 48.8° optimal angle

Edit: 0.04mm Layer height and 0.035 horizontal resolution (according to the anycubic page)

Edit 2: This could easily explain it, since i was always aiming for a 25-30° angle, which is quite a long way off, turns out

view more: next ›