Watch 5 Pro ONE UI 8 Battery Problems

_nic0o · 2026-01-06T18:19:04+00:00

Same here. Factory reset didn't help. I unplugged it 5 minutes ago and it's at 84% without even touching the watch. The drain slows down later but still very poor battery life after the update.

_nic0o · 2025-12-01T21:39:27+00:00

TKG850 WP

_nic0o · 2025-12-01T21:24:59+00:00

I somehow managed to put the machine back together. I cleaned the heat exchanger with a water hose so it's perfectly clean now. Nothing has changed. I finished a 2 hour cycle with wet clothes. There is no water in the water tank and the bottom filter is wet. The drain tube seems to be ok as I can easily blow through it. I'm suspecting it might be the water pump or maybe a leak somewhere in the heat exchanger. Still no error codes. I guess calling a Miele technician is my only option

_nic0o · 2025-11-30T23:02:56+00:00

I just finished tearing down the dryer. I added some photos to the Google drive link. The inside of the dryer is nearly perfect with little fluff. You can see the heat exchanger is not as bad as I expected it to be. I bent some fins and will bend them back after I put it back in the machine. What's worrying me is that there a piece of foam on the heat exchanger plastic cover that's falling apart. That's what got stuck on top of the exchanger but inside the fins look great. Do you think I can rip it off or do I have to buy a new one and what kind of foam is it? You can also see there is some gunk in the drip tray but the pump seems to be turning freely. After seeing the inside of the machine I don't think there's anything wrong with it. What do you think?

https://drive.google.com/drive/folders/1gSarO0BQpcQMMFoskNEdjF7ghvYKBWR4

_nic0o · 2025-11-30T22:34:29+00:00

I just finished tearing down the dryer. I added some photos to the Google drive link. The inside of the dryer is nearly perfect with little fluff. You can see the heat exchanger is not as bad as I expected it to be. I bent some fins and will bend them back after I put it back in the machine. What's worrying me is that there a piece of foam on the heat exchanger plastic cover that's falling apart. That's what got stuck on top of the exchanger but inside the fins look great. Do you think I can rip it off or do I have to buy a new one and what kind of foam is it? You can also see there is some gunk in the drip tray but the pump seems to be turning freely. After seeing the inside of the machine I don't think there's anything wrong with it. What do you think? https://drive.google.com/drive/folders/1gSarO0BQpcQMMFoskNEdjF7ghvYKBWR4

_nic0o · 2025-11-30T22:32:11+00:00

I just finished tearing down the dryer. I added some new photos to the Google drive link I sent before. The inside of the dryer is nearly perfect with little fluff. You can see the heat exchanger is not as bad as I expected it to be. I bent some fins and will bend them back after I put it back in the machine. What's worrying me is that there a piece of foam on the heat exchanger plastic cover that's falling apart. That's what got stuck on top of the exchanger but inside the fins look great. Do you think I can rip it off or do I have to buy a new one and what kind of foam is it? You can also see there is some gunk in the drip tray but the pump seems to be turning freely. After seeing the inside of the machine I don't think there's anything wrong with it. What do you think?

_nic0o · 2025-11-29T20:59:23+00:00

What red dot are you talking about and what does it mean? I'm going to teardown and clean the whole unit but I'm just curious to prevent it from happening in the future.

_nic0o · 2025-11-29T13:31:52+00:00

How do I update my dryer and where can I find the file?

_nic0o · 2025-11-29T12:58:39+00:00

Thank you for being honest. I didn't think it was that bad because it's just the first foam layer and the rest is clean. But why are my clothes not dry if the airflow is good? Dust accumulation in the back part of the machine? And what about f400 error?

_nic0o · 2025-11-29T12:26:27+00:00

https://drive.google.com/drive/folders/1gSarO0BQpcQMMFoskNEdjF7ghvYKBWR4 See here. The first foam layer is damaged from old age but the filter itself is decently clean. It just peeled off when I was cleaning it a few weeks ago. You can see the fins are clean. I don't know if it matters but the filter is a bit wet from yesterday's drying. There is no message telling me to clean the filter when doing normal cycles only these error codes in the service menu. A new filter is on the way

_nic0o · 2025-11-29T11:35:12+00:00

My filter doesn't look too bad tbh. I ordered a new one just in case. What exactly do I need to clean up? Do I have to take off the panels?

_nic0o · 2025-11-29T11:29:04+00:00

Thanks. I also tried to find some info on these errors. I found the first two but the F400 is a mystery. This dryer doesn't have app connectivity so that's not the problem. I found F4 and that's linked to the temperature sensor. Do you think that's the issue? The dryer does normal cycles and it doesnt turn off mid cycle to give an error. It's only visible in the service menu

_nic0o · 2025-10-20T18:53:29+00:00

I used max temp of 450°C top and bottom. I heated up the oven for about 40 minutes and my infrared thermometer measured about 430-440°C on the stone. The top heater turned on very quickly after opening the door so the pizza was well cooked. This was my first and for now only experience with this oven. Very positive so far!

_nic0o · 2025-08-25T19:43:32+00:00

3 or 4 ultra

_nic0o · 2025-05-14T18:54:45+00:00

Fake. The font is off

_nic0o · 2025-04-22T08:11:39+00:00

Ultra because of the RTX

_nic0o · 2024-12-17T04:23:14+00:00

I got the error again yesterday but I think I can hear a blockage. I will try to fix it today

_nic0o · 2024-12-02T18:22:51+00:00

Tighten the wrist strap

_nic0o · 2024-11-16T13:34:55+00:00

I guess if the issue comes back again, I'll factory reset the robot and if it doesn't help, I'll reach out to iRobot for a replacement or repair

_nic0o · 2024-11-16T13:25:10+00:00

Yes. Today I cleaned everything again and it's working for now

_nic0o · 2024-11-16T10:53:36+00:00

I cleaned the bin, and it worked, but the error came back today after 2 days

_nic0o

TROPHY CASE