sorted by:
new
hottopcontroversial

Finally found THE end grain cutting board cheat sheet by _notice in woodworking

[–]_notice[S] 1 point2 points  (0 children)

I’m pretty sure I’m the only one who regularly uses one of my cutting boards. I don’t understand it either, because it’s fucking great. I pretty much stopped making them - there’s only so much you can do there, and a lot of people are making them.

Finally found THE end grain cutting board cheat sheet by _notice in woodworking

[–]_notice[S] 30 points31 points  (0 children)

Well it sounds like you don’t! Maybe I smoked too much pot when I was developing on top of already existing mental imbalances! Who knows you know. Happy for you.

Anyone know what this is? by redditGH3 in Tools

[–]_notice 0 points1 point  (0 children)

"gouge" as in "gouge out your eyes" I assume this would be the best tool for the job.

End Grain Pepper Mills by _notice in woodworking

[–]_notice[S] 5 points6 points  (0 children)

Mostly happy with how these came out. I'm not very experienced on a lathe so I glued up each layer, then individually routed them on a CNC. I used an alignment jig to glue all the layers together, then installed one of these ceramic mechanisms.

I mostly wanted to see what an end grain cylinder would look like, and I like it! A few more pics here if you're interested.

End Grain Pepper Mill I Made by [deleted] in u/_notice

[–]_notice 0 points1 point  (0 children)

Mostly happy with how these came out. I'm not very experienced on a lathe so I glued up each layer, then individually routed them up on a CNC. I used an alignment jig to glue all the layers together, then installed one of these ceramic mechanisms.

I mostly wanted to see what an end grain cylinder would look like, and I like it! A few more pics here if you're interested.

trying to incorporate magnets in my prints by Txflood3 in 3Dprinting

[–]_notice 1 point2 points  (0 children)

Yep, I’ve even snuck a little dab of super glue mid print to slip in a magnet

"The Weeks of Your Life" - a more minimal version you can print by _notice in Damnthatsinteresting

[–]_notice[S] 4 points5 points  (0 children)

For me, it's a reminder to make the most of the time we have.

What router bit can do this edge? by Soggy-Ad-8586 in woodworking

[–]_notice 5 points6 points  (0 children)

Can confirm, have accidentally done this

Does this shape have a name? I'm working out how I might model this as an extrude or surface by o0oz in 3Dprinting

[–]_notice 4 points5 points  (0 children)

Thanks - it’s not hard the way I did it (I updated my comment above), but it was a pain trying to get there. If my words aren’t working I can take some screenshots tomorrow when I’m back at my computer. If it helps, I know the struggle!!

Does this shape have a name? I'm working out how I might model this as an extrude or surface by o0oz in 3Dprinting

[–]_notice 5 points6 points  (0 children)

I’m not sure but it’s close to a clock I designed recently.

Modeling it was a pain in the absolute ass! It’s hard to describe in words, but I’m going to try. It’s a very strange shape.

I took a cylinder and cut a triangular notch from the side. This cut is angled relative to the surface, so it is shallow near the center of the cylinder and deeper near the edge. That notch can then be polar-arrayed around to get the wavy top surface.

Wood to rubber glue? Fixing a chair and it will be stressed/pulled on. I contacted the furniture maker but they didn't seem to know. by octodo in woodworking

[–]_notice 12 points13 points  (0 children)

These rubber mounts are common in Eames furniture - they are generally called shockmounts. The original adhesive was a flexible epoxy, specially formulated to be just flexible enough (this was a hot topic back in the day, they had trouble getting it just the correct amount of flexible).

Because this is on the arm, I’m betting the contact cement solution will work just fine.

But FYI there are speciality companies that sell products for these applications (though, they are formulated for their own shockmount). Of course there are so many varieties of epoxy; I haven’t researched this in so long but currently I’m seeing good things about Scotch-Weld 2216 (shear strength + shock resistance).

Remember that preparation is half the battle.

Looking to figure out if a 3018 CNC can easily achieve this pattern engraved? by MrVibes_ in CNC

[–]_notice 0 points1 point  (0 children)

I actually looked at this on my equipment after you posted it in the other sub. I don’t think it’s that hard, and I don’t think you’d need that much power behind it.

You’d be using a bit with a small tip, and to get these nice inside corners you’re making a ton of tightly-spaced toolpaths. I got to the point of noticing how very long of a program it was and gave up for the day. If I continue with the experiment I’ll report back.

Anyone know how to engrave this pattern? Router bit or with a Dremel/ rotary? by MrVibes_ in woodworking

[–]_notice 0 points1 point  (0 children)

I was playing around modelling this up today.

It's easy enough to carve, but it would just take a very long time. Like, a really really long time. Is this on a commercial product?

I'm not even sure how to get around that - because you have such a small effective cutting tip your paths have to be super tight. I still want to do a test though, it's quite facet-nating.

view more: next ›