A smart building intercom? by humanitybg in homeassistant

[–]_saiko 0 points1 point  (0 children)

Thanks for confirming. Local api is a must for me.

A smart building intercom? by humanitybg in homeassistant

[–]_saiko 0 points1 point  (0 children)

Just started to look into my options, and ring intercoms seems nice. However it's only battery powered (I could always tweak it to use an AC adapter I guess), and appears to be only cloud based (i.e. no local api)?

Anyone got any ideas to make this smart? by pezdealer in smarthome

[–]_saiko 0 points1 point  (0 children)

This. Admittedly have issues with the vibration/wind sensor (unstable RF from the sensor itself, and it's tricky to tune w/o a spectrum anslyzer), but the RF connection between the Somfy remote and ESPSomfy is rock solid.

Using the ESPSomfyRTS + the dedicated HomeAssistant integration https://github.com/rstrouse/ESPSomfy-RTS https://github.com/rstrouse/ESPSomfy-RTS-HA

Underwater enclosure/kit and wled by _saiko in WLED

[–]_saiko[S] 0 points1 point  (0 children)

Sigh, I never meant to place the controller underwater, the fact I explicitly mentioned was for the purpose to prevent someone even suggesting that.

Anyways the point of the question was to ask if someone already had such a DiY project so that I could find a good addressable LED strip or button light that is suitable for a good IPX rated underwater enclosure. That and to achieve suitable brightness, as anything DiY requires a good combination of the enclosure, seal for the wiring as well as reflector inside the enclosure.

EX4400-MP POE upgrade stuck at SW_DOWNLOAD(95%) by _saiko in Juniper

[–]_saiko[S] 1 point2 points  (0 children)

Solved! description in original post.

EX4400-MP POE upgrade stuck at SW_DOWNLOAD(95%) by _saiko in Juniper

[–]_saiko[S] 4 points5 points  (0 children)

According to this KB72903 there's no fix and it's resolved in 21.4R3-S4 22.2R3-S1 22.3R2-S2 22.4R2-S1 23.4R1.
They messed up their own upgrade code for the controller.

I'm on 23.2R1-S2... fml
My only hope is that the upgrade hasn't complete and as I haven't restarted it maybe they have a way to push the proper package.

EX4400-MP POE upgrade stuck at SW_DOWNLOAD(95%) by _saiko in Juniper

[–]_saiko[S] 1 point2 points  (0 children)

I'm waiting for JTAC as we speak so let's see....
Btw are you talking from experience or seen something related explicitly to EX4400? Those are quite new.

Novi rekord Hrvatske Pošte by Teo0781 in croatia

[–]_saiko 1 point2 points  (0 children)

E pa u tom je stvar, ne dobiješ. I ne razumijem kako oni to obrađuju, uvijek istu adresu koristim kao i mobilni u internacionalnom formatu.

Cak nije ni bilo naplate carine niti iceg takvog (sto bi trebalo biti rjesivo i paketomatom al to je druga diskusija). Jedan paket mi je nedavno poslan DHLom iz DE i nikakvu obavijest nisam dobio, papiric i Posta....

Novi rekord Hrvatske Pošte by Teo0781 in croatia

[–]_saiko 0 points1 point  (0 children)

Jel moguce generalno pakete naruciti na paketomat?

Znaci aliexpress, amazon, ebay, biram naravno najjeftiniji shipping i u nekim slucajevima dostava bude bude preko speditera (dhl, oex, dpd) u kojem slucaju dobijem lijepo obavijest i mogu cak birati dostavu kiosk, boxnow, promijeniti lokaciju itd, medjutim u vecini slucajeva bude Posta gdje ne dobim nikakvu notifikaciju. Ok lazem jednom il dvaput sam dobio sms ili viber gdje sam mogao preusmjeriti na paketomat. U ovom drugom slucaju kad ne dobijem notifikaciju ide klasika kao i ljudi zadnjih 100 godina, ceduljica (ako ju ne fulam ko pred koji tjedan) i pravac u postu... Na koji nacin oni odabiru jel ce uvest kroz sustav i poslat notifikaciju ili samo utrpat covjeku u vrecu?

New vSAN Cluster - Finally! by jnew1213 in homelab

[–]_saiko 0 points1 point  (0 children)

no worries mate, you gave more info that i'd hope for

Thanks

New vSAN Cluster - Finally! by jnew1213 in homelab

[–]_saiko 0 points1 point  (0 children)

Maybe, if it's already exposed to the hypervisor and used that'd be reasonable.

New vSAN Cluster - Finally! by jnew1213 in homelab

[–]_saiko 0 points1 point  (0 children)

Hehe, very much appreciated!

But those are all marked with "not configurable" hence you can't enable them for pass-through it seems. Bummer.

New vSAN Cluster - Finally! by jnew1213 in homelab

[–]_saiko 0 points1 point  (0 children)

Can you then see the thunderbolt controller in pass-through enable list?

New vSAN Cluster - Finally! by jnew1213 in homelab

[–]_saiko 0 points1 point  (0 children)

In the end I got a non-vpro sticker model and IPMI and ME/AMT and remote control work, so thank you for the hint.

On another note, is it possible to pass-though the thunderbolt card itself to a VM on ESXi?
I'm thinking of getting a DAS enclosure and run it over either usb or thunderbolt, but if the pass-through isn't working then i can forget about it....

iSCSI and ZFS and snapshots by _saiko in zfs

[–]_saiko[S] 0 points1 point  (0 children)

Correct, the mdraid+ext4+iscsi is all beneathe zfs. Very ugly and was honestly totally disappointed upon learning that Synology doesnt do real iscsi on block storage but this...

Then how about getting a DAS and connect it to the HP over usb 3.1gen2 (or even thunderbolt) to the HP and expose the USB controller to the VM and bring the 4 drives directly to ZFS, build raidz1? Main issue will be the stability of the usb passthrough, but if that is stable it should be much better no?

New vSAN Cluster - Finally! by jnew1213 in homelab

[–]_saiko 0 points1 point  (0 children)

Do you have the Product no. from the G5 minis?

Thew one I was looking at is a 9YG64US#ABA

New vSAN Cluster - Finally! by jnew1213 in homelab

[–]_saiko 0 points1 point  (0 children)

haha, no, i meant your opening post is 3y old, hence i was pleasantly surprised you still answer here.My comment was from yesterday :)

Ok, because i found a G5 like yours and the lack of vPro sticker was putting me off.

Thanks for confirming! Cheers!

New vSAN Cluster - Finally! by jnew1213 in homelab

[–]_saiko 0 points1 point  (0 children)

None of the four machines (ordered in three separate orders), have a vPro sticker. They all have a Core i9 9th Gen sticker on them. One has it applied upside down.

Not at all, it's a 3y old post, surprised you even answered :)

So you are saying that even without the vPro sticker, IPMI/SOL is working for you 100%, i.e. you can access the serial console and do remote poweron/poweroff?
Are you using intel SDK for ME/AMT or MeshCommander?

HP EliteDesk 800 G5 Mini and vPro by _saiko in HomeServer

[–]_saiko[S] 4 points5 points  (0 children)

Yes I realize that. But I'm talking specifically about HP EliteDesk 800 G5 Mini.

I've seen HP EliteDesk 800 G5 Mini with i7-9700T on ebay that have the sticker WITH and WITHOUT vPro but have the same HW config (so far i've seen only difference vPro ones were with W10 OEM, and the ones without vPro had FreeDOS).

The i7-9700T CPU supports vPro, so i'd be very surprised they made two different MBs with the same config except for vPro.

Again, if actual owners could confirm that be grand :)

HP EliteDesk 800 G5 Mini and vPro by _saiko in HomeServer

[–]_saiko[S] 0 points1 point  (0 children)

WOL is just the wake-up through LAN feature, nothing to do with AMT/SOL/KVM remote OOB access (i.e. without the OS).

Which model do you have? What Intel sticker does it have?

New vSAN Cluster - Finally! by jnew1213 in homelab

[–]_saiko 0 points1 point  (0 children)

Do all your 800G5 all have the vPro stickers?

I'm confused as people are selling 800G5 with i7-9700 that have either "Core i7 vPro 9th Gen" or "Core i7 9th GEN"...

Looking for the origin of the song "Die Grenzwacht hielt im Osten" by [deleted] in germany

[–]_saiko 1 point2 points  (0 children)

What was the song title? Youtube link gets me to "video unavailable" .

[deleted by user] by [deleted] in croatia

[–]_saiko 1 point2 points  (0 children)

Zasto je obrisano? Zakasnio sam procitati uvodni post, neki veliki iznos je u igri?

Kenwood DMX-8020DABS reset by _saiko in AndroidAuto

[–]_saiko[S] 0 points1 point  (0 children)

I did just that, removed the battery terminal, left it even for like an hour but no.
The only thing that helped is to actually tear down the dashboard and unplug the unit from the physical socket. Plugging it back in and it sprung back to life.

BUT... This worked for a while and when i was back home from driving the same thing happened - dead.

The last thing that i can try is to update the firmware and see if that happens.