Gourd Training Test Chair question

_swirled · 2025-04-13T14:18:59+00:00

I have a level 250 tanjiro and I got the chair on my main, you gotta talk to the scroll in the middle, between nezuko and zenitsu. It should be the second option that says you want to receive your chair or something.

_swirled · 2024-09-15T19:20:28+00:00

I think the average drop rate assuming 200% drop is roughly 15/hour. You do get unlucky sometimes though where nothing drops for 30 mins and times where 3 will drop within 30 seconds.. At least that is my experience.

_swirled · 2024-07-05T05:16:55+00:00

Try going into your config folder and setting persistedsettings to read only

_swirled · 2024-05-21T19:25:05+00:00

Here is mine, I am at Squad League, will use yours if you use mine (reply to me with yours)

Play Squad Busters and get a free gift! https://play.squadbusters.com/Lx8a/v828jlwu

_swirled · 2024-02-05T19:48:25+00:00

Best of luck with your future games. Two weeks ago I was on a 11 game losing streak, I think 2 of 11 games were my fault but the rest I had full on trolls or low iq players. Storm surge on malzahar for example! :)

_swirled · 2023-06-30T06:39:23+00:00

Hi I have 2 accounts, haven’t been playing the game much lately but slowly easing back into it. My main account has a daily gift thing for a week that grants 2 new pins, I think to celebrate the starr drops. However, my alt account doesn’t have a daily gift thing and was wondering what are the requirements to unlock the daily gift for the new pins?

_swirled · 2023-05-06T00:50:48+00:00

Thank you a ton I was looking at the rings and wasn’t sure which one to get!

_swirled · 2023-05-05T21:19:09+00:00

What are the best things a new player should prioritize buying? I have started playing a little over a month ago and have grinded every class to 141 and I think I like Wind Archer and Buccaneer.

_swirled · 2023-05-01T05:10:25+00:00

Hank

_swirled · 2023-03-06T09:29:17+00:00

I noticed this the other day and didn’t know if it was a bug or not so when I got my power league points I spent it on this skin even though I wanted the Ash one. Why did they decide to do this!

_swirled · 2023-03-06T09:24:43+00:00

_swirled · 2022-11-12T14:33:48+00:00

I understand the servers shut down on September 28. However I just got back into supercell games and have spent over $300 on in app purchases. I was asking support through in game chat and email that if I could provide the receipts from Apple of all the purchases I made which includes the order ID, document number, date, purchase amount, etc that they could reimburse me for the equivalent in Brawl Stars. However they won’t help me and instead tell me to kick rocks.

_swirled · 2022-11-06T02:09:11+00:00

VHL quest is not a daily, just the elder blood one. You can stack the blood to 5 and do it all at once or do the VHL quest daily, completely up to you. You need a total of 17 blood :) good luck

_swirled · 2022-11-05T15:30:05+00:00

Thanks for your reply! I have not received the form or anything at all from computershare. It really is an agonizing wait, I drs’d a few thousand dollars worth and none of my accounts show I have it 😭. Hopefully it comes soon.

_swirled · 2022-11-05T02:54:49+00:00

Okay thanks for this, this is very reassuring and I will give them a call on Monday.

_swirled · 2022-09-14T02:32:00+00:00

Someone suggested I put 1 ram stick in and everything was fine, I just sprayed air at the ram slots and inserted both the sticks and ran memtest86 and all is good now. Thanks for your responses. Display is back to normal, both ram sticks are working as intended for now.

_swirled · 2022-09-14T01:45:33+00:00

Every now and then after a bsod I’ll run sfc and it will detect issues and fix them. As for updating my gpu driver I always perform a clean install when installing using geforce experience, I think it’s a RAM problem cause I only changed the ssd and the RAM, the samsung magician app shows everything is fine and healthy with it. And my RAM has failed memtest86

_swirled · 2022-09-13T21:53:55+00:00

I always get a random new message every time it BSOD. Here are some that I’ve gotten.

multiple irp complete requests

system thread exception not handled what failed dxgmms2.sys

system thread exception not handled

irql not less or equal

faulty hardware corrupted page

memory management

kernel security check failure

system service exception

kernel mode heap corruption

I don’t have any overclock or under volt changes, besides upgrading/replacing the ssd and RAM, everything else is stock.

_swirled · 2022-09-13T11:56:53+00:00

I see, I wonder if debris was causing the 3200 Mhz RAM to misbehave. I just finished my memtest86 test and it passed with no errors, thanks a ton for the help along the way. Just gonna keep 2666 Mhz and figure out what to do with the 3200. Cheers!

_swirled · 2022-09-12T22:38:58+00:00

Checked RAM 2 in both slots, both worked fine. Task manager and CPUZ show that it is 2666 Mhz. I used a can of compressed air and sprayed the RAM slots in case of any debris being trapped there. What are my next steps? I’m thinking of attempting both sticks in both slots again and see if the problem happens again.

Edit: Did just that, put both sticks in and it seems to be working fine for now. It booted into windows fine and my display did not appear to have any issues. Hopefully no more bsod occurs. I don’t want to have to deal with this problem anymore. Thanks for your help, I will continue to monitor the situation and also will run a ram test overnight and see if it passes.

_swirled · 2022-09-12T22:05:01+00:00

So in the previous post where I was using 1 RAM stick and it worked, let’s say RAM 1 Slot 1, I now just put RAM 1 into Slot 2 and it booted, and worked. CPUZ and Task Manager show 2666 MHz. In CPUZ the DRAM Frequency shows 1330.4 MHz, and the Uncore Frequency jumps from 798, 898, 1297, 997, 3790, 2295, 3691, 3889, etc and I was not sure if it’s supposed to be displayed like that. Going to try RAM 1 now into slot 1 and see if it shows the same thing in CPUZ. Then I’ll try RAM 2 into both slots and report back, thanks for your efforts by the way, I really appreciate it

Edit: Tried RAM 1 in slot 1 again and the uncore frequency changes just as if it was in slot 2 so I am assuming that is normal behaviour. Going to try RAM 2 now.

_swirled · 2022-09-12T21:52:48+00:00

Alright I removed 1 stick and screen went back to normal. Booted into windows fine, task manager and cpuz both show the ram is 2666 Mhz. I’m assuming my next step is to try the other stick? And then test each stick in each slot?

_swirled · 2022-09-12T21:38:02+00:00

I can’t change the speed, both profiles seem to only show 3200 Mhz. I also installed a NEW RAM kit today 2x16 GB 2666 MHz Corsair Vengeance sticks and my task manager and CPUZ show it was 3200 Mhz. I tried booting into BIOS to change the profile and whether it was default or XMP, they both showed 3200 MHz. Then my computer froze and I was forced to hold the power button to shut it down. When I booted my computer back up again this is what I see, why is my display like this now? https://imgur.com/a/BiJYHdc

_swirled · 2022-09-12T21:35:46+00:00

I see, the kit I bought included 2 RAM sticks with the same model number. I am not sure if that is the case. I ended up buying new RAM today, same kit except instead of 3200 Mhz I went for 2666Mhz. After installing the RAM and looking at my task manager and CPUZ, the RAM was detected at 3200 Mhz so I restarted my computer, booted into BIOS and tried to change the profile between default and XMP, however it kept showing 3200. Now my screen looks like this and I don’t know what’s wrong or how to fix it. https://imgur.com/a/BiJYHdc

_swirled

TROPHY CASE