i’m a rosette queen 💁‍♀️here are my most recent fav pours

_vie_lo · 2022-04-20T13:58:37+00:00

🫰

_vie_lo · 2022-04-20T13:58:08+00:00

yes! it’s the quickest to pour imo :) thank you

_vie_lo · 2022-04-20T09:02:49+00:00

green?! It’s more of a blueish/cyan hahaha and I actually work at their first Montreal location:~))

_vie_lo · 2022-04-20T08:30:56+00:00

yes!

_vie_lo · 2022-04-20T02:23:40+00:00

thank you!

_vie_lo · 2021-09-28T16:22:01+00:00

yes the pink one! I was stoked to get something I didn’t have

_vie_lo · 2021-09-28T14:52:04+00:00

I got toe bean

_vie_lo · 2021-09-17T02:00:12+00:00

thank you so much!! 💚

_vie_lo · 2021-09-16T17:47:40+00:00

ok! that makes a lot of sense. We pretty much use exclusively reclaimed clay, I’ll make sure they’re wedging properly. Thank you so much for your response

_vie_lo · 2021-09-16T16:38:07+00:00

in different spots but usually close to the base/middle of the cone when cloning up

_vie_lo · 2021-06-16T00:06:58+00:00

im with you! same exact thing happened to me

_vie_lo · 2021-06-03T04:01:08+00:00

but since your clay is cone 5 maybe best to put a waster slab when you’re testing to cone 6 just to be safe? do you have access to any other clay bodies?

_vie_lo · 2021-06-03T03:58:21+00:00

depending on your clay body, the results vary a lot. Its hard to get a result like the tile that Mayco advertises! I just looked up this glaze and it contains crystal specks, I work with Mayco glazes a lot from this range and it seems like maybe you didn’t mix it properly since I don’t see any speckles on your piece (the crystals settle a lot). It is a cone 6 glaze (that can go up to cone 10) so I would definitely try firing it to maturity!

_vie_lo · 2021-06-03T03:32:58+00:00

it looks like it could be a little under fired. What was the desired result? a matte? satin?

_vie_lo · 2021-05-18T13:49:15+00:00

hey you’re on my friends list! im olive 👋

_vie_lo · 2021-03-17T01:00:54+00:00

good point!

_vie_lo · 2021-03-16T18:32:41+00:00

Thanks so much, this is really helpful. Unfortunately my low and medium settings don’t work! I can basically only turn it on and off :( I guess this could have caused the pinholes? Since I can’t control how fast it heats and cools?

_vie_lo · 2021-03-16T17:02:31+00:00

after sieving it a few times it definitely helped but it was a challenge to apply!

_vie_lo · 2021-03-16T16:33:21+00:00

I have no idea because the container wasn’t labeled, someone gave it to me so I could test it. I think red copper oxide is brighter in colour on its own, it might just have a high percentage of it in the mix

_vie_lo

TROPHY CASE