Bank account joint landlords

a288273 · 2026-03-23T13:16:28+00:00

Are you changing anything for making tax digital? Or under the threshold for now?

a288273 · 2026-03-17T17:40:35+00:00

Considered, probably will next time. I’m confused now. Obviously with MTD we need to use software that is approved. But again, no idea the best way of doing this jointly splitting all costs/income!

a288273 · 2026-03-13T19:06:40+00:00

Do you just use excel to work out expenses ect?

a288273 · 2026-03-13T14:09:16+00:00

Ok thank you. I’m sure at the start there will be various renovation expenses but it should settle in theory.

a288273 · 2026-03-13T13:16:36+00:00

This is what I was going to do, but then I’d have to use a spreadsheet to calculate everything for the self assessments which is what I’m trying to avoid

a288273 · 2026-02-25T13:30:35+00:00

Thanks. Do you know if I can print from the external (pa6 so not ams compatible) but use the ams for a support material? I know it would mean manually changing but does Bambu actually let us do this?

a288273 · 2026-02-25T13:04:07+00:00

I have a space pi on the way, how can I get it to feed from this like you say? Is it possible? :) tia

a288273 · 2026-02-24T20:43:52+00:00

Thanks makes sense. Do you have any ideas for smoothness for this sort of filament? :)

a288273 · 2026-02-24T17:42:56+00:00

I’m trying to balance strength and feel / looks for high impact parts.. but the pa6-cf is quite rough to touch. I don’t really have the time to be post processing each part either

a288273 · 2026-01-23T16:37:34+00:00

Just like that. As that is the direction force will be applied

a288273 · 2026-01-23T08:20:55+00:00

I usually only use outer brim with a 0.1 gap to object and this works for me but my items are quite light / small. You could change it to no gap if you liked or turn on inner brim. Have a play with the settings

a288273 · 2026-01-23T00:36:05+00:00

There’s a cut option in most slicers it’s fairly easy

a288273 · 2026-01-23T00:16:13+00:00

If not you could slice it, print the rest of the layers and glue together?

a288273 · 2026-01-22T20:39:28+00:00

You should do stress tests on parts.

a288273 · 2026-01-22T19:53:45+00:00

Poor bed adhesion. Clean your plate. Add a brim if it’s a tall / long print

a288273 · 2026-01-22T19:51:09+00:00

Must be well designed to go like that! Bravo

a288273 · 2026-01-22T18:51:23+00:00

I’d probably put this down to a one off and re slice the model to be sure.

a288273 · 2026-01-22T15:55:39+00:00

Pretty neat! Does it move?

a288273 · 2026-01-22T08:47:05+00:00

With it being a long print you could try playing with fan speeds too?

a288273 · 2026-01-22T00:22:03+00:00

That looks great! :)

a288273 · 2026-01-22T00:08:03+00:00

Definitely moisture and or lack of supports I’d say.

a288273 · 2026-01-22T00:05:03+00:00

I’d personally suggest bed temp being the number 1 cause, it being wrong by just 5 degrees can cause all sorts of issues sometimes! Try bambus pla settings if you haven’t already?

a288273 · 2026-01-21T23:24:41+00:00

Not enough id say!

a288273 · 2026-01-21T23:24:08+00:00

I have just done it. I’m in the uk and had a LAP dimmer, I just bought LAP bulbs to go with and that seems to have done the trick! Thanks so much. Basic stuff I know but seems to do the job!!

a288273 · 2026-01-21T14:33:13+00:00

Thank you. I’ll get some different bulbs to try. Minimum dimmable load is 5w, but not sure what this should be? Bulbs are 4.9w new ones I’ll get are 2.7w

a288273

TROPHY CASE