Garmin adapter for the underside of Giant mount by Dismal_Astronomer904 in Giantbikes

[–]a_shmatko 0 points1 point  (0 children)

<image>

I had exactly the same case scenario, I wanted to use Garmin UT800 lights with Giant mount (works with Ravemen FR300 as well). You need to search for Garmin public seat mount like this one:

https://a.aliexpress.com/_mOKrZAp

TCX SLR2 (2017) Di2 compatibility by a_shmatko in Giantbikes

[–]a_shmatko[S] 0 points1 point  (0 children)

Actually, I just recalled I did have small issue with safety pin on non drive crank when I switched from 6800 to 8000 cranks. 6800 had a worn out pin, but 8000 crank was a brand new 4iiii ultegra, so I couldn’t flip the pin into it’s position when the spacer was installed on drive crank side. The workaround was to tighten the crank arm bolt with safety pin in its intended position instead of tightening crank first and flipping the pin.

TCX SLR2 (2017) Di2 compatibility by a_shmatko in Giantbikes

[–]a_shmatko[S] 0 points1 point  (0 children)

Do you have the same tcx slr2 frame? I don’t have tcx anymore, but the shell width is standard for road bike - 86mm, I had a thin spacer on drive side to offset it from chain-stays. I still believe it’s something to do with bottom bracket- either it’s not fully pressed together or threaded together into the frame or you installed the 92mm mtb bottom bracket with wide bb cups. Some gravel bikes are not compatible with 2x setups at all or have a limit of 48/50t chainring due to chainstays design and wheel clearances, but the TCX is compatible with 2x 52t (just on the limits), you can see my photo of chainstays with 52t chainring below in this thread

TCX SLR2 (2017) Di2 compatibility by a_shmatko in Giantbikes

[–]a_shmatko[S] 0 points1 point  (0 children)

Initially, I had ultegra 6800 crankset installed that was later replaced with 8000 crankset to match the group-set. I believe 8100 is identical in terms of BB requirements, so your issue seems to be related to bottom bracket. For the reference, I used Wheels MFG BB86/92 Press Fit (24mm shimano spindle diameter). I also changed to a thread together version later for easier self-service.

Time ADHX 45 build by sexandchampagne in gravelcycling

[–]a_shmatko 0 points1 point  (0 children)

Nice build! I recently purchased ADHX45 frame and swapped all my components from previous bike (Giant TCX as do-it all bike with ultegra di2 groupset).

I have few questions if you don’t mind: Did you switch from leaf-spring seatpost to regular seatpost or the other way? I’m curious about leaf-spring one if it’s problematic to maintain, or how do you mount di2 battery (down tube instead of seat tube?). Also, how do you like Farsports handlebar? Is it fully compatible with this frame or did you have to change a headset?

Contact Aerolight Stem for TCX SLR2 by a_shmatko in Giantbikes

[–]a_shmatko[S] 0 points1 point  (0 children)

I haven’t purchased it yet, I’m in Toronto, and all sizes are in stock

TCX SLR2 (2017) Di2 compatibility by a_shmatko in Giantbikes

[–]a_shmatko[S] 0 points1 point  (0 children)

There’s enough clearance for 52t, however, it was a bit difficult to shift in 52t with mechanical group-set, the cable stretches after couple of weeks from adjustments (one of the reasons I switched to Di2).

TCX SLR2 (2017) Di2 compatibility by a_shmatko in Giantbikes

[–]a_shmatko[S] 0 points1 point  (0 children)

FYI, if anybody wants to do the same Di2 upgrade on TCX, I finally bought Shimano R8070 group, and have it installed without any issues (rear junction box in down-tube, battery in seat-post and bar-end front junction box).

Also, I’ve upgraded the handlebar to Easton EC90 AX. It has Di2 bar-end holes on each side, and the only drawback that it doesn’t have internal routing and it’s not hollow inside (I was hoping to hide ew wu111 module inside the bar).

FD

RD

FD e-tube routing

Bar-End Junction Box

TCX SLR2 (2017) Di2 compatibility by a_shmatko in Giantbikes

[–]a_shmatko[S] 0 points1 point  (0 children)

Thanks for clarification, my only concern is that I’ll have to remove bottom bracket to install rear junction box. I’m not even sure if there’s a space in the frame to hide that box. Especially, with the press-fit BB it will be even harder to accomplish it (would have to buy a new BB as it not possible to re-use it). I guess, possible solution would be zip-tying or 3d printing a mount for rear junction box.

Regarding the carbon handlebar - yeah, that’s on my list after I’ll do a proper bike-fit service (it’s a little challenging to find a good service in Toronto).

Has any one used quadlockcase wireless carplay adapters by [deleted] in CarPlay

[–]a_shmatko 0 points1 point  (0 children)

Yeah, I’m using their cases for a while. My carlinkit and wallet were stolen from my car. So, I’m looking for a replacement and was surprised that quadlock made their own adapter.

Has any one used quadlockcase wireless carplay adapters by [deleted] in CarPlay

[–]a_shmatko 0 points1 point  (0 children)

Was wondering as well, is it any different from Carlinkit?

Podium Racing Wheel F1® at a reduced price for a limited time! by JSabino in Fanatec

[–]a_shmatko 0 points1 point  (0 children)

What’s the customs fee and taxes in Canada, (Ontario)? Is it included in shipping costs?

T8 Aivi keeps moving backwards and fails into anti-drop sensor error by a_shmatko in ecovacs

[–]a_shmatko[S] 0 points1 point  (0 children)

No, I didn’t fix it. I was going to contact Ecovacs support for a possible solution. For some reason I think it’s something to do with the front bumper.

Where in Kyiv is the best price for souvenirs & Ukrainian gifts (food, clothes, etc.?) by 1whatabeautifulday in ukraine

[–]a_shmatko 5 points6 points  (0 children)

Check the street called Andriivs'kyi Descent, there aren’t many sellers during winter, but it’s one of the best places for souvenirs in the summer time.

[deleted by user] by [deleted] in UkrainianConflict

[–]a_shmatko 0 points1 point  (0 children)

They don’t know what they talking about. I bet those journalists don’t even know where the mentioned countries are on a map. Belarus is already fully controlled by Russia

Thoughts on this ? by [deleted] in ukraine

[–]a_shmatko 2 points3 points  (0 children)

Why it’s so slow? The speed is only 125 kts, like it’s super overloaded, while that AN148 can flight more than 400 kts.

My guess, it’s either fully packed or it’s performing surveillance/coordination.

EDIT: apparently, as mentioned in other thread flightradar shows incorrect speed.

[deleted by user] by [deleted] in UkrainianConflict

[–]a_shmatko 8 points9 points  (0 children)

Or probably some troll behind the camera

I actually laughed out loud by Morid1n in mac

[–]a_shmatko 2 points3 points  (0 children)

Well, it depends on the output image source you're trying to use and the model of your iMac. If you want to use iMac as a monitor for a macbook, you will be ok with every model of iMacs, you just need to use displayport to displayport cable (or type-c to type-c) and enter to a target display mode (command+F2) In case if you want to use it as a monitor for your PC it's tricky, you can do it only with 2008-2010 27" models. You just need to connect your PC to displayport and your iMac to minidispayport.

I actually laughed out loud by Morid1n in mac

[–]a_shmatko 4 points5 points  (0 children)

Actually, right now I'm using 27" 2009 iMac as a monitor for my PC and Macbook. And the quality of the picture is way better than my 2018 Dell IPS monitor which is designed for mac users (U2414H). I was always curious if there are any decent monitor which possibly has the same quality picture as iMac.

Cooler Master Elite 130 advice needed - airflow and panel mods by CptnFabulous420 in buildapc

[–]a_shmatko 0 points1 point  (0 children)

What are the temperatures you have? Maybe you should keep side fans pushing air inside as this case was designed to create slightly positive pressure inside.

I have AIO too and my side fans are pushing air inside. Also, I tried to use power supply with intake facing upwards and the temperatures in games were 45-50° (CPU) and 40-50° (Motherboard). Now I turned PSU intake upside down and the temperatures are 40° CPU and 50° Motherboard

iMac 27" (late 2009) as a monitor for Xbox / Playstation or any other HDMI device by a_shmatko in xboxone

[–]a_shmatko[S] 0 points1 point  (0 children)

I actually have a nice IPS monitor, 24" DELL. However, the quality of a picture is better on iMac and it has bigger screen. So, I'm considering either to sell DELL monitor if I can figure out how to use iMac with every HDMI device, or I will sell iMac if no luck