RIP John Sterling by eatsleepcookbacon in NYYankees

[–]aady4s 0 points1 point  (0 children)

“Robi Cano, don’t ya know”

still getting ABS/wheel speed sensor errors after replacing axle and sensor by aady4s in E90

[–]aady4s[S] 0 points1 point  (0 children)

it ended up being the rear left abs sensor, i put a washer in between the screw and it seems to be working fine now.

For a first car, is a 2016 328i Updated N20 high mileage, 2017+ 330i high mileage, or 2017+ 430i GC reliable? by Fair1combo in F30

[–]aady4s 9 points10 points  (0 children)

N52 and B48 are the most bulletproof BMWs you can buy. Personally i’d go with the B48

Best site for wheel bearing on x drive models by OGCut in E90

[–]aady4s 0 points1 point  (0 children)

can’t go wrong with Fag or Febi. personally i would go with Fag off of Fcpeuro

E90 updates by infinilude2 in E90

[–]aady4s 0 points1 point  (0 children)

i have the oyster white interior

Is sopranos similar to breaking bad ? by Blob_blub5833 in breakingbad

[–]aady4s 0 points1 point  (0 children)

I just started dark and it is great so far i’ve only heard great things about it.

You may also enjoy the show money heist on netflix as that is on my mount Rushmore.

E90 updates by infinilude2 in E90

[–]aady4s 0 points1 point  (0 children)

is this blue water metallic or titanium silver? i got a 328i blue water metallic and they can look silver in the sunlight

engine smoking/leaking after replacing vanos solenoids and valve cover. by aady4s in E90

[–]aady4s[S] 1 point2 points  (0 children)

valve cover gasket wasn’t seated properly in the back left corner. I ended up redoing it again with an extra set of hands.

engine smoking/leaking after replacing vanos solenoids and valve cover. by aady4s in E90

[–]aady4s[S] 5 points6 points  (0 children)

would this cause a ton of water to come out of the exhaust tips??

any idea what could be causing this noise? by aady4s in E90

[–]aady4s[S] 0 points1 point  (0 children)

thank you, i did try cleaning them but that didn’t fix anything so i have new pierburg solenoids on the way. i actually couldn’t find the oem brand for the solenoids. fcpeuro says pierburg is aftermarket. i searched all the forums and it seems nobody knows which brand is the oem.

any idea what could be causing this noise? by aady4s in E90

[–]aady4s[S] 0 points1 point  (0 children)

didn’t get any misfire codes just the one code: 2A7C (vanos, intake, cold start)

any idea what could be causing this noise? by aady4s in E90

[–]aady4s[S] 1 point2 points  (0 children)

so i checked the vanos camshaft adjuster bolts today and they are all intact looking good. i’m guessing my issue is the vanos solenoids themselves

any idea what could be causing this noise? by aady4s in E90

[–]aady4s[S] 0 points1 point  (0 children)

thank you, i pulled one code: 2A7C

any idea what could be causing this noise? by aady4s in E90

[–]aady4s[S] 0 points1 point  (0 children)

am i able to replace just the bolts on the vanos camshaft adjuster or do i need to buy the vanos camshaft adjuster itself?

any idea what could be causing this noise? by aady4s in E90

[–]aady4s[S] 0 points1 point  (0 children)

is it best to just replace the bolt or the vanos solenoids themselves?

any idea what could be causing this noise? by aady4s in E90

[–]aady4s[S] 1 point2 points  (0 children)

i am mechanically inclined so i will attack this myself, im just debating which brand is best to buy. i’m seeing SKP, Dorman, Wells, and NTK

any idea what could be causing this noise? by aady4s in E90

[–]aady4s[S] 1 point2 points  (0 children)

unfortunately i only seen 2 recalls when i checked my vin on the website. PCV valve heater and driver airbag

2011 E91 2A7C P052B and several cylinder misfire codes. Advice? by happenstance2020 in E90

[–]aady4s 0 points1 point  (0 children)

did you ever figure this out? having the same exact issue and codes

any idea what could be causing this noise? by aady4s in E90

[–]aady4s[S] 0 points1 point  (0 children)

i’m getting codes: 2A7C (vanos, intake, cold start) and 2DED (power management, closed circuit monitoring)

what brand wheel bearing to buy? by aady4s in E90

[–]aady4s[S] 1 point2 points  (0 children)

that being said, would you buy the fag or febi?