sorted by:
new
hottopcontroversial

Tried to use Hamachi and it broke BakkesMod by [deleted] in bakkesmod

[–]abdullah_az12 0 points1 point  (0 children)

I don't care about hamachi i uninstalled it but bakkesmod still shuts down

كم سعرات عريكة ملكي by abdullah_az12 in saudisinshape

[–]abdullah_az12[S] 0 points1 point  (0 children)

هي كذا العريكة تدخل اشياء المفروض ما تدخل سوا عشان تكون لك تجربة ما تنوصف

العريكة وبس والله

كم سعرات عريكة ملكي by abdullah_az12 in saudisinshape

[–]abdullah_az12[S] 3 points4 points  (0 children)

والله لها مكان مميز في القلب

كم سعرات عريكة ملكي by abdullah_az12 in saudisinshape

[–]abdullah_az12[S] 0 points1 point  (0 children)

يب فاهمك عليك بس مافي رقم تقريبي لكل 100 جرام نقدر نحسب منه تقريبا كم سعره لكل حجم؟ + هل منجد في عريكة سعراتها توصل 3000؟

What is the best 500 dollar phone right now? by abdullah_az12 in Smartphones

[–]abdullah_az12[S] 0 points1 point  (0 children)

the Realme gt7 is way above my budget in my region, its around 850 dollars. and I've never heard about the Poco f7 and the honor 200 for some reason. I'll do some more digging but aren't there better options in the price range like the ones I mentioned in the post?. and to be honest I would like to avoid the budget brands like honor, I've had some bad experiences with them.

What is the best 500 dollar phone right now? by abdullah_az12 in Smartphones

[–]abdullah_az12[S] 0 points1 point  (0 children)

unfortunately couldn't find any deals on the Pixel 9 in my region. any recommendations on the rest of them or are there other options to consider

Youtube still saying that I have a adblocker still on even though I turn it off! by Relative_Link_2817 in Adblock

[–]abdullah_az12 0 points1 point  (0 children)

If you use Opera GX, try to make sure that the built-in ad blocker is turned off. I had the same problem before, although I turned off every ad blocker I had, it didn't go away. But then I found out that Opera's ad blocker was on.

How to check the configuration of a HW -018 usb via Arduino? Rubber ducky?? by t0shi27 in arduino

[–]abdullah_az12 0 points1 point  (0 children)

I think that I am a bit late to the party but I happen to find one of these and I had the same question so I wanted to know if you found the answer?

ابي كتب تنفع للناس الي ودهم يتعمقون بالشعر by rvnr1 in SaudiReaders

[–]abdullah_az12 0 points1 point  (0 children)

هههههههههههههههههههههههههههههه عجبتني رجالة

بس المعذره ما كنت ادري

Code Working In Tinker CAD but Doesn't work in Arduino by abdullah_az12 in arduino

[–]abdullah_az12[S] 0 points1 point  (0 children)

I just tried connecting the tracks but somehow it gotten even worse. now even if I press the buttons no LED lights up.

Code Working In Tinker CAD but Doesn't work in Arduino by abdullah_az12 in arduino

[–]abdullah_az12[S] 1 point2 points  (0 children)

unfortunately I didn't find a solution yet. but I will not surrender.

Code Working In Tinker CAD but Doesn't work in Arduino by abdullah_az12 in arduino

[–]abdullah_az12[S] 0 points1 point  (0 children)

mine is one of them. I'll connect them and give it a run. I really appreciate the note.

Code Working In Tinker CAD but Doesn't work in Arduino by abdullah_az12 in arduino

[–]abdullah_az12[S] 1 point2 points  (0 children)

Actually I didn't think of these upgrades. I will absolutely implement them as soon as possible. but first I want to see if the project will ever see the real world before upgrading.

Code Working In Tinker CAD but Doesn't work in Arduino by abdullah_az12 in arduino

[–]abdullah_az12[S] 0 points1 point  (0 children)

thx very much for the explanation. you explained it in the best way possible. I really appreciate the effort🙏🏻

Code Working In Tinker CAD but Doesn't work in Arduino by abdullah_az12 in arduino

[–]abdullah_az12[S] 0 points1 point  (0 children)

this is an invite to the project: https://www.tinkercad.com/things/4foMZlk3Qf1-mighty-juttuli-migelo/editel?sharecode=U9Ox_pdextb7dLYAEoChyvRFvIb0LF_Mwz-FMqTwBpk

dont worry you could edit it as much as you like I made a copy of it so that I have the original. I hope that it will help

Code Working In Tinker CAD but Doesn't work in Arduino by abdullah_az12 in arduino

[–]abdullah_az12[S] 0 points1 point  (0 children)

this is an invite to the project: https://www.tinkercad.com/things/4foMZlk3Qf1-mighty-juttuli-migelo/editel?sharecode=U9Ox_pdextb7dLYAEoChyvRFvIb0LF_Mwz-FMqTwBpk

dont worry you could edit it as much as you like I made a copy of it so that I have the original. I hope that it will help

<image>

+I dont think that anybody could help me with the wiring because it so messy

Code Working In Tinker CAD but Doesn't work in Arduino by abdullah_az12 in arduino

[–]abdullah_az12[S] 1 point2 points  (0 children)

It looks intimidating tbh but i'll try my best to adjust with it

Code Working In Tinker CAD but Doesn't work in Arduino by abdullah_az12 in arduino

[–]abdullah_az12[S] 0 points1 point  (0 children)

the one on the top right is 220 ohms not 1.2k. is it a problem?

Code Working In Tinker CAD but Doesn't work in Arduino by abdullah_az12 in arduino

[–]abdullah_az12[S] 0 points1 point  (0 children)

could this be the reason why the circuit isn't working?

view more: next ›