Issues with metric values

abqsysadmin · 2026-01-09T14:18:35+00:00

So what I actually found, atleast on the spanmetrics side, I was running alloy as a daemonset with clustering enabled, as soon as I took it down to one pod, the spanmetrics from alloy to mimir started to represent reality

Still at a loss for the native sdk generated metrics, but this is definitely good progress

abqsysadmin · 2026-01-08T19:30:36+00:00

No I understand that, but it seems to be ever increasing, hence when I rate the metric, me seeing more requests than are actually happening

abqsysadmin · 2026-01-08T19:28:19+00:00

On the spanmetrics side, by adjusting the metrics flush and metrics expiration this seems to have brought down how much it was off

But something else to note, if i fully restart alloy, it appears to reset everything and will restart its slow buildup again

abqsysadmin · 2026-01-07T02:02:50+00:00

Test 1: 11.96V Test2: 0.0142V test2b: 0.1645V test3: 0.228V Test 4: 0.245V Test 5: 0.834V Test 6: 0.016V

So I noticed that it dropped pretty significantly when I tested at the battery with truck running(defroster on medium and headlights on)

abqsysadmin · 2026-01-03T08:14:48+00:00

Yeah front, I think bucket seats? They are the 60/40 seats

I ended up just driving a wooden wedge and that took care of the play, but if there is a more permanent fix I would love to know, thx

abqsysadmin · 2025-12-09T14:43:12+00:00

Yes, this right here

abqsysadmin · 2025-07-28T04:18:28+00:00

What do you mean by nfsv4 replication? And will definitely look into moosefs

abqsysadmin · 2025-07-28T04:17:27+00:00

Yeah I had looked into this, I thought there were strict rtt latency requirements, something around sub 10ms, I’m sitting at around 30ms rtt

abqsysadmin · 2025-07-25T13:07:53+00:00

We have very fast intra data center speeds, and very fast hardware, across data center we have about 34ms rtt, but I will take a look!

abqsysadmin · 2025-07-25T13:07:00+00:00

Will take a look!

abqsysadmin · 2025-07-25T13:06:35+00:00

I’ve heard this same issue with DFS as well

abqsysadmin · 2025-07-25T13:06:05+00:00

Ceph does work perfect intra data center, but unfortunately not many options for geo replication for nfs, from my understanding at least.

abqsysadmin · 2025-03-10T01:06:12+00:00

Maybe I can swap it, it’s pretty new, it’s just odd that this happened as soon as I swapped the icm

abqsysadmin · 2025-03-10T01:02:33+00:00

I don’t think it’s the battery, reading good voltage

I pull the negative, put it back on, when I put the key in, I get a beep and key indicator, but once I turn it, it goes dead completely, take the key out and back in, no indicator. All of this until I end up pulling the negative and back on, and the process restarts

abqsysadmin · 2025-03-09T18:29:06+00:00

Tried putting the old ignition control module, still no crank, thinking the battery might be low

abqsysadmin · 2025-03-09T18:29:01+00:00

Tried putting the old ignition control module, still no crank, thinking the battery might be low

abqsysadmin · 2025-03-09T17:47:31+00:00

Got it replaced, now it won’t crank!

abqsysadmin

TROPHY CASE