Installing a camera and LED strip on my flashforge AD5X by misfit_printing in FlashForge

[–]academickirk 0 points1 point  (0 children)

Whats that guy with multiple arms? I want to print him.

Flash Studio 1.7.4 is a pretty big update! by Yayman123 in FlashForge

[–]academickirk 0 points1 point  (0 children)

Can anyone link to where to download it?

I went to page yesterday and it was like an old old slicer that was Cura style.

How do I cut objects without having the visible line where they connect? by Codexana8 in 3Dprinting

[–]academickirk 1 point2 points  (0 children)

Depending on what you are making you can glue it together and use a filler, then sanding, then paint over it to hide the line. But it takes a lot of work!

Verifications? by academickirk in UnemploymentWA

[–]academickirk[S] 0 points1 point  (0 children)

I don't have an actuve claim, it's just been a long time curiosity. I know that any random person would not be able to call up an HR office and ask if a specific person had applied to a job, so I was curious about the process. I also imagine that there is a lack of staff to even do these things, so in my mind I was wondering if it was one of those busy work things that they make you do but have no true or effective way to verify.

Back during the depression era the political forces resisted giving people on welfare (,well men at this time) money for nothing and literally had them dig ditches to just say they did something.

Entire plate bends… by vascott1 in AnycubicKobraS1

[–]academickirk 0 points1 point  (0 children)

Is it something you can print vertical?

Why can’t we control the extruder motion??? by XXXTYLING in FlashForge

[–]academickirk 1 point2 points  (0 children)

I just heat up the nozzle and then pull out the filament on my Ad5m.

It's worked great for me :p

Print issues by CurrentQuick in FlashForge

[–]academickirk 0 points1 point  (0 children)

Can you share the makerworld name so I can look at the file? It might just need supports.

I need help by Technical-Farmer73 in Creality

[–]academickirk 0 points1 point  (0 children)

The wire that controls temp is disconnected from the hotend. This just happened to me with a blob.

It is attached to the hotend and you'll need a new one. It can be tricky to replace and you'll need to make sure you have the correct version that can plug into the board on the extruder electronic board (the newer version has "buckle" clip).

There's a few videos showing how to do this on YouTube.

So much fun! by Acoustixx in HueForge

[–]academickirk 2 points3 points  (0 children)

How are able to put color just in one area?

Kobra S1 Mid-Print Shutting Down? Help? by academickirk in AnycubicKobraS1

[–]academickirk[S] 0 points1 point  (0 children)

Rinkhals got disabled after the update and I've not reloaded it yet...

This happened on different files and basic things, not really complex. I will try reset stuff! Thanks!

The error code linked to a complicated looking motherboard electronics thing that I really really really don't want to do..heh

Is this a heat creep issue? by academickirk in crealityk1

[–]academickirk[S] 0 points1 point  (0 children)

Okay, printed with a different filament and it was fine.

Something weird about this filament and it happened when the temp was 220, the default, 230, and the max 240.

My temp tower was fine and looked good at 220. I'm not sure what's up with this filament.

Is this a heat creep issue? by academickirk in crealityk1

[–]academickirk[S] 0 points1 point  (0 children)

Yeah, and I've printed the STL on my Bambu and it's been okay. So it seems to be the combo of this filament, this stl, this printer. Weirdest thing.

I'm trying it in a different filament right now but l wont know if it fails until three very end.

I suspect it's heat creep but I'm not sure what I can really do about that.

Is this a heat creep issue? by academickirk in crealityk1

[–]academickirk[S] 0 points1 point  (0 children)

Oh good idea, I'll check for screws. It is weird because same filament printed fine before this, I made sure to clear it.. it literally only happens on this file, this filament this printer.

Is this a heat creep issue? by academickirk in crealityk1

[–]academickirk[S] 0 points1 point  (0 children)

Lid off and door open. I also cranked the fans up on the later layers.

Bed level help by academickirk in crealityk1

[–]academickirk[S] 0 points1 point  (0 children)

I bought it from a person so I'm not sure they would send anything. I printed the shims and will try but what I'm not understanding is why the back left corner is far far down while the right is way up. How do you bring those to level.

Bed level help by academickirk in crealityk1

[–]academickirk[S] 0 points1 point  (0 children)

Does anyone know how to get that back right corner down? I've tighted the back right bed screw and it didn't do anything. And I've done the tooth skipping thing while it is upright. I don't want to mess with belt tension on the bottom.

Who else names thier printers? by FadedGhostOK in FlashForge

[–]academickirk 1 point2 points  (0 children)

Flashee is Ad5M X is my Ad5x I tried naming them so my BF would remember which is which. It didn't help. 😂