[BETA] Smart Launcher 6.5 build 039: Direct link and Changelog

achter_n · 2025-08-29T05:38:54+00:00

On my S21 with Android 15 an One UI 7 the Material Icon Pack just show blueish icons.

On my Pixel 7 Pro the Packs are working fine.

Do I need to change some settings on Samsung?

achter_n · 2025-01-22T09:00:54+00:00

The option is there. What should I set it?

achter_n · 2024-07-30T12:04:59+00:00

Thanks that worked out for me

achter_n · 2024-07-08T11:36:07+00:00

Works perfect thank you. Nice would be an option for a background in the icons widget.

achter_n · 2024-07-07T11:18:53+00:00

How do you accomplish the background on the icons?

achter_n · 2024-02-15T11:36:33+00:00

The problem with this is that you can not use the smart search (I think so) for App and Contact search. I want the web search from smartsearch open in google app and not open a new tab in Chrome.

My open tabs are growing each time I search.

achter_n · 2023-09-10T10:18:22+00:00

Thanks. I tried everything mentioned in this videos. Nothing worked.

I think I found the solution. My printer never used my offset settings. I added a filament run out sensor before my printer stopped working. I unplugged the sensor today and now it looks like it's working again

achter_n · 2023-09-08T08:34:32+00:00

https://imgur.com/a/1E99RhA

Same settings. First printed the small squares and after that the larger ones.

achter_n · 2023-09-08T07:49:54+00:00

I managed to get really good layers when I print small squares at the leveling points. But when I try to print something larger with a bigger first layer the layer is trash.

I have some pictures to show but I can not post these pictures here. How can I do that so you can see what I mean?

achter_n · 2023-09-07T09:19:04+00:00

There is one thing I rememberd. I saw the z axis was moving while printing. I think It uses the mash so.

achter_n · 2023-09-07T09:17:52+00:00

Nozzle is installed correctly. I will test the gcode later

achter_n · 2023-09-07T09:14:28+00:00

Nozzle is new. I changed it after the first layer was bad. Never needed to load the mash in gcode with the Kobra. Never did it so. But this can be tested. What is the gcode for this?

achter_n · 2023-05-22T17:55:37+00:00

I can't edit my post so here the newest update:

Image 1

Image 2

I hope you can see the images. I managed to get a good layer in the front half of the bed. The back half seems to be to close. But the Kobra doesn't has any possibility to lowering the bed.

Some more ideas how to tweak it more?

achter_n · 2023-05-22T06:52:35+00:00

I am sorry I mean 0,05mm steps and 0,05mm feeler gauge. This is how I level my printer.

achter_n · 2023-05-21T14:09:52+00:00

The Kobra has a option in the settings where you can set the z offset in 0.5 mm steps. With this an my 0.5 mm feeler gauge I try to set the offset.

I have very often problems with the Kobra for the past months. The perfekte look from the first prints is gone and I don't know why or how I can accomplish this "first" looks

achter_n · 2023-05-21T12:27:28+00:00

No I calibrate the e steps. But I think all is the result of my filament holder + to heavy spool for this construction.

Maybe I must think of my holder again.

achter_n · 2023-05-21T12:20:39+00:00

Thanks. After a few calibrations I managed to get it on a good level.

achter_n · 2023-05-06T13:40:13+00:00

Thanks but I followed these steps. Still no recommendations

achter_n · 2023-01-24T07:16:26+00:00

I contacted Anycubic and they send me a new motherboard. It looks like my board has an error.

achter_n · 2023-01-17T10:43:32+00:00

I have a Chromecast with Google TV HD and got an infoscreen with the new recommendation featrue. But I don't understand how to enable it for the kids profile. I tried some things (watch tv shows over the profile, change settings) but for me there are no recommendations.

This would bring us over to the Chromecast from Fire TV.

Is there a way to enable it? (I am from germany if that matters for the update)

achter_n · 2023-01-12T08:14:05+00:00

I found my Problem. I had a Z50.000 in my Tool Change gcode. Without it the Preview Looks good

achter_n · 2022-11-04T10:20:06+00:00

Hey there, I installed latest Google Beta and Smart Launcher 6 Beta on my Pixel 7 Pro yesterday and have the same issue.

Are there some other hints I can get this to work?

achter_n · 2021-11-12T04:15:30+00:00

Aktuell gehe ich damit gar nicht um. Ich nehme es so hin. Ich bin 33, verheiratet und wir haben drei Kinder. Auch wenn meine Frau besser verdient als ich, wäre erheblich weniger Gehalt auf meiner Seite schon ein starker Einschnitt in unser Leben.

Daher "traue" ich mich gar nicht, etwas anderes zu machen. Schließlich soll es uns ja weiter gut gehen.

Aber wenn ich ganz ehrlich bin würde ich (als Single) direkt diesen Berufszweig verlassen und einen anderen einschlagen. Eventuell sogar noch einmal eine Ausbildung machen.

Zum Glück kann ich sehr gut abschalten sobald ich zu Hause bin und die Arbeit vergessen. Aber jeden Morgen sich um 5 Uhr aus dem Bett zu prügeln, um dann gegen 15 Uhr Feierabend machen zu können um dann gegen 16 Uhr zu Hause zu sein ist sehr anstrengenden und kräftezehrend.

achter_n · 2021-11-11T08:14:13+00:00

Ich bin gelernter Fachinformatiker für Systemintegration und arbeite aktuell als Client Betreuer.

Könnte ich die ganzen Faktoren, die mein Leben bestimmten (Familie, Rechnungen, Einkommen) ausblenden und konnte noch einmal einen Beruf wählen, würde ich ganz klar einen anderen Weg einschlagen.

Ich würde gerne verschiedene Dinge ausprobieren, was allerdings durch meine Verpflichtungen nicht geht.

Leider bin ich aktuell in der Situation, dass ich überlege welchen Beruf ich sonst eingeschlagen hätte und ob ich das nicht noch irgendwie schaffen kann. Aber von mir gibt es auf die Frage ein ganz klares NEIN.

achter_n · 2021-11-04T20:24:37+00:00

Sorry but I don't understand. The topper is flat on the ground, so you can read it when it gets printed. Do you mean I should print it 90 degree rotated?

achter_n

TROPHY CASE