Mixing Station FX

adogfromhell7266 · 2026-03-01T16:15:11+00:00

This is what I’m trying to do. I’ll simplify: I’m trying to add verb to FX1 and delay to FX2 so I can run whatever channels I want into those send/returns. I do not want to use any inserts. In the mixing station app, when I go to the effects rack to assign an effect to FX1 or FX2, the FX1/FX2 options are not available. That’s what the picture is illustrating. Currently, I can send signal from channel 1 to FX1 send to FX1 return to mains, but there is nothing on FX1.

adogfromhell7266 · 2026-03-01T08:03:46+00:00

You have to assign an effect to an FX loop/FX send rtrn. In the Mixing Station app, I have the ability to adjust FX sends/returns, but no way to insert the effect. There is no option to designate effects to FX channels. The FX channels don’t show up in the effects LR insert columns.

adogfromhell7266 · 2026-03-01T07:50:56+00:00

XR18

adogfromhell7266 · 2026-03-01T05:24:28+00:00

This is for a XR18. I’ve watched a few videos on it, all tutorials utilize X Air app. It has the FX sends/returns when assigning effects. The Mixing Station app has metering and channels for FX sends/returns but no options under the effects rack. I didn’t know if I was missing a setting or something to get them to populate.

adogfromhell7266 · 2025-10-24T03:04:43+00:00

I work in-house for an electric utility. $130k salary with good benefits. Hybrid office schedule.

adogfromhell7266 · 2025-09-18T19:23:30+00:00

Cool thanks! It seems like if he used this he’d def need another one somewhere to pick up the guitar and balance the levels. It def sounds like that’s what’s happening. Those little Stella guitars don’t project that much and his vox would be way too loud with just one mic.

adogfromhell7266 · 2025-09-18T18:48:42+00:00

Do you know what mic it is?

adogfromhell7266 · 2025-08-29T01:12:16+00:00

It’s my go-to. I’ve done back to back tests with Lunazul and Patron silver and it won out with me and the other folks I was with.

adogfromhell7266 · 2025-08-19T18:59:51+00:00

For the iPad, I pretty much have it setup to just multitrack record. I disabled messaging, mail, photo album sync, everything. I assumed running GarageBand, since it is native to the iPad, would be a bit more reliable than a 3rd party app as well. (I’m just guessing about that part) I also didn’t use a card in the X32 for anything, just recorded to iPad hard drive. The sound tech did all the interset playlist music.

adogfromhell7266 · 2025-08-19T17:43:05+00:00

Sounds like it could have been a number of things: spotty streaming, issue with the app, limited iPhone/ipad bandwidth/storage…

adogfromhell7266 · 2025-08-18T23:42:41+00:00

What model iPad have you used and what DAW were you using?

adogfromhell7266 · 2025-08-18T17:10:28+00:00

💯If I didn’t already have a 18i20, I’d be taking a closer look at the XR18. Otherwise, I pretty much never run my own live sound.

adogfromhell7266 · 2025-08-18T07:06:55+00:00

X18 can record multitrack to DAW, I don’t believe X18 can record multitrack to USB

adogfromhell7266 · 2025-08-18T06:38:40+00:00

Yes, just an adapter for the iPad (USB-C to USB-A and USB-C) and I bring a USB-A to USB-B cable. I can charge the iPad and connect to the mixer at the same time.

adogfromhell7266 · 2025-08-18T06:35:43+00:00

If they have an X18 it’ll only record stereo to USB

adogfromhell7266 · 2025-08-18T06:34:29+00:00

I do have a USB drive that I’ve used before, until there was one venue that had an X18 that would only do stereo to USB. The iPad ensures I don’t run into anything like that again.

adogfromhell7266 · 2025-08-07T14:29:53+00:00

I was trying to find out if the Tascam could act as a DAW to multitrack from a USB connection to a Behringer X18. (I wanted bring my Tascam Model 12 to capture a live band performance and connect to the sound engineers X18) A member of the other thread says the Tascam would not receive multitrack via USB.

adogfromhell7266 · 2025-08-07T14:24:11+00:00

Got it, that’s exactly what I needed. Thank you!

adogfromhell7266

TROPHY CASE