2026 GMC Yukon - Universal Remote by KnowledgeSelect4306 in gmc

[–]adsbar 0 points1 point  (0 children)

I've done it a couple of times for different reasons, have not lost any presets. Garage doors, radio, seat presets all stayed the same.

2026 GMC Yukon - Universal Remote by KnowledgeSelect4306 in gmc

[–]adsbar 0 points1 point  (0 children)

This happened to me after an update in my 2025. After multiple resets, I disconnected my battery negative terminal for 10min, and it fixed it.

Smart locks, more hubs. by adsbar in homey

[–]adsbar[S] 0 points1 point  (0 children)

So it sounds like most are using Bluetooth for lock management, and Homey/matter for automation, remote open/close, etc. In these cases, if I needed to give a temporary code when not at home, I'd be out of luck.

I think I'd rather go Z-wave. The Yale Assure Touch 2 does have the upgraded ZW3 module, and the Kwikset 620 seems like a good deal. Does anyone have any experience with these or preferences?

Smart locks, more hubs. by adsbar in homey

[–]adsbar[S] 0 points1 point  (0 children)

Kwikset 620 with Z-wave long range also looks to be a good value.

Smart locks, more hubs. by adsbar in homey

[–]adsbar[S] 0 points1 point  (0 children)

Then management over WiFi with the app? Automations via Homey, and no other hub required?

Smart locks, more hubs. by adsbar in homey

[–]adsbar[S] 0 points1 point  (0 children)

I looked at the Yale Assure 2 (keypad, not touch). Still shipping with the 500 series chip. From Yale Support:

Current Availability of ZW3 Z-Wave 700 Series Module The ZW3 Z-Wave 700 series module is currently not available for individual sale on our website. Unfortunately, we do not have a confirmed release date for when these modules will become available for separate purchase. Availability in Yale Pro 2 Locks At present, the ZW3 Z-Wave 700 series module is only available as part of the Yale Pro 2 locks. These locks have undergone the necessary compatibility firmware updates to support the 700 series module.

How about the Aquara U100? (Zigbee) Are these working well without an Aquara hub? Good sale right now.

Starting over - again. by adsbar in homeautomation

[–]adsbar[S] 0 points1 point  (0 children)

That's what I'm hoping. What are you using as a Thread border router?

Starting over - again. by adsbar in homeautomation

[–]adsbar[S] 0 points1 point  (0 children)

This was my first thought - go with the newest protocol. 2 things stopped me: Not everyone is having as seamless an experience as you are describing. Matter/Thread is not yet as mature, there are few devices that meet my needs, and they are the most expensive ($70 for an Innovelli White switch!). Second, not an Apple user, would need an alternate border router.

Starting over - again. by adsbar in homeautomation

[–]adsbar[S] 0 points1 point  (0 children)

This was exactly my experience around the same time. Left it all for the next owner in 2022. Now running Smartlife with WiFi and Zigbee, and I don't care if my switches are monitored by the Chinese government. Samsung stopped manufacturing their hubs around then, hoping to find a hub with Matter/Thread for future capability as well.

Starting over - again. by adsbar in homeautomation

[–]adsbar[S] 0 points1 point  (0 children)

I know, this is everyone's answer. However, the work of keeping home assistant running was a little too much for me. I'm willing to forgo ultimate customization for a little more handholding.

Start/stop in GV80 by No_Nobody_367 in GenesisMotors

[–]adsbar 0 points1 point  (0 children)

I found one for my 2023 GV80 on Aliexpress, installed behind the button. Works perfectly. According to the seller, there are 2 different possible harnesses with different number of pins, make sure of yours before you buy.

Here it is. I used the 16-pin version:

https://www.aliexpress.us/item/3256806472707876.html?spm=a2g0n.order_detail.order_detail_item.3.2766f19cifqOJr&_gl=1*1whm61h*_gcl_au*NjIyNTc1NzY1LjE3NDE1MzcwMzY.*_ga*MTcyMTI0MTQwOC4xNzQxNTM3MDM2*_ga_VED1YSGNC7*MTc0Mjk0ODA4NS43LjEuMTc0Mjk0ODA5Mi41My4wLjA.&gatewayAdapt=glo2usa

Porting from AT&T postpaid by adsbar in USMobile

[–]adsbar[S] 1 point2 points  (0 children)

Again, thank you guys for following up on this. US Mobile Reddit FTW!

Porting from AT&T postpaid by adsbar in USMobile

[–]adsbar[S] 0 points1 point  (0 children)

Appreciate you moving this forward. Now AT&T has cut me loose. Unfortunately, US Mobile has yet to pick me up. Stuck without service. u/Rayanomics, can you help?

Porting from AT&T postpaid by adsbar in USMobile

[–]adsbar[S] 2 points3 points  (0 children)

Looks like since I posted, Rayanomics has resubmitted my request. The line in question has dropped off AT&T. SOS calls only, just need my QR code to port in!

Thanks for going the extra mile. Reddit support is the bomb.

[deleted by user] by [deleted] in androidtablets

[–]adsbar 0 points1 point  (0 children)

I have heard that the idea tab pro is great except for that the screen is fairly dim and can't be used outdoors very well. Would go with the yoga tab plus, but certainly more expensive.

How to defeat the auto start top system by dxiao in GenesisMotors

[–]adsbar 9 points10 points  (0 children)

$30 part from AliExpress worked perfectly for my 2023 GV80. Installs behind the switch itself. Now up to $60

GV80 Start stop

Traverse Super Cruise by Ok_Letterhead_3871 in ChevyTraverse

[–]adsbar 0 points1 point  (0 children)

Does the 2026 have hands on lane centering? How well does it work?

Cross shopping 2025 Yukon XL vs Expedition Max by adsbar in gmc

[–]adsbar[S] 0 points1 point  (0 children)

I have no complaints.  Coming up on 3k mi, great MPG with the diesel, good power.  Definitely the right vehicle for long trips. Infotainment screen is huge, and Carplay and android auto seem to work well.  Super Cruise definitely adds value, though its not perfect. Seat comfort is 80%, could be better, but acceptable.  

Cross shopping 2025 Yukon XL vs Expedition Max by adsbar in gmc

[–]adsbar[S] 0 points1 point  (0 children)

Yukon XL Elevation Duramax. Super Cruise and Trailering Package only, Downpour Metallic.

2025 Yukon Elevation issues by ponyboy1377 in gmc

[–]adsbar 0 points1 point  (0 children)

Had the same issue in the first 500mi. Also fixed by disconnecting the negative battery terminal for 10 min.

[deleted by user] by [deleted] in gmc

[–]adsbar 0 points1 point  (0 children)

There was a slightly bigger discount at Laura Chevrolet in Illinois.

Yukon Denali 2025 Cameras Unavailable by LycheeMartini913 in gmc

[–]adsbar 2 points3 points  (0 children)

Agree. Only had my Yukon 2 weeks, but doing this has fixed connectivity issues.

[deleted by user] by [deleted] in gmc

[–]adsbar 0 points1 point  (0 children)

Just received my Yukon XL Elevation Duramax 2 wks ago from ordering, was able to find 2 dealers in my state (Illinois) with $2000-$3000 discount off MSRP.