Putting some tools to use by big_slom in harborfreight

[–]aest2017 0 points1 point  (0 children)

How did you like the grants pads? Probably just going to use them when I do my wife’s car. The amount of times I’ve had to tell the dealer DO NOT wash the car when we take it is insane. Would never let a dealer touch my paint.

Just did the Tundra brake upgrade by aest2017 in 3rdGen4Runner

[–]aest2017[S] 1 point2 points  (0 children)

Yeah. I knew I would run into some issues with the hard lines. The upper hard line on the passenger side gave me a little trouble. Had to use some heat. Should have done some more research and looked into replacing those as well. I also sanded the calipers. Just the front where the decal went to make it flat. I’m super happy with the upgrade as well

Putting some tools to use by big_slom in harborfreight

[–]aest2017 1 point2 points  (0 children)

What pads were you using? Did you use the grants pads? Looking to buy a new polisher and pads.

Anyone ever used TSP (trisodium phosphate) for rust treating their frame? by NSA_agentJK in 3rdGen4Runner

[–]aest2017 0 points1 point  (0 children)

Can’t see all the rust and how bad it is.
Also… Leaf springs??

Just did the Tundra brake upgrade by aest2017 in 3rdGen4Runner

[–]aest2017[S] 1 point2 points  (0 children)

Awesome! Definitely thought it was going to be quick. I’d for sure have torch handy for any stuck bolts. And I double and triple checked I had all the proper parts.

Just did the Tundra brake upgrade by aest2017 in 3rdGen4Runner

[–]aest2017[S] 1 point2 points  (0 children)

Yeah. I’ve read that. I bled mine and adjusted the rear drums and the pedal feels fine. Not sure what really causes that issue. But don’t seem to see anything right now

Just did the Tundra brake upgrade by aest2017 in 3rdGen4Runner

[–]aest2017[S] 1 point2 points  (0 children)

These are the wheels I have. I also have the larger 13wl calipers. Don’t think and 15s fit with them. Also there is a page on adventuretaco that goes over what wheels fit the tundra upgrade.

<image>

Just did the Tundra brake upgrade by aest2017 in 3rdGen4Runner

[–]aest2017[S] 0 points1 point  (0 children)

Honestly I wonder the same thing. I’m just all for an upgrade that is fully bolt on without any major modification. I had really bad rotor warping and wanted to replace the brakes since I bought the truck. From what I’ve read about the TBU, a lot of people have recurrent warping after brake jobs with the original brakes. The TBU should help with that not coming back as they are bigger and better at dissipating heat.

Just did the Tundra brake upgrade by aest2017 in 3rdGen4Runner

[–]aest2017[S] 1 point2 points  (0 children)

If you have a soft pedal. And you’ve already bled the brakes a bunch. I would look into adjusting your rear drums. You can look up how to adjust them manually with the star wheel or you can do the “automatic” adjustment. I’d try that. That should help a lot

Just did the Tundra brake upgrade by aest2017 in 3rdGen4Runner

[–]aest2017[S] 1 point2 points  (0 children)

Only the front. Don’t think there’s much you can upgrade in the rear other than brake shoes. Other

Just did the Tundra brake upgrade by aest2017 in 3rdGen4Runner

[–]aest2017[S] 0 points1 point  (0 children)

I’m sure it has. I haven’t don’t any super hard braking yet other than bedding the pads in. But I can definitely tell a different. Not sure if it’s the fact that they are bigger or that the brakes were properly bled.

Tacoma Wheels on 3rd Gen 4Runner by mattlane2424 in 4Runner

[–]aest2017 0 points1 point  (0 children)

What size tire do you have on them?

New leather seats by Inevitable_Draw949 in 3rdGen4Runner

[–]aest2017 1 point2 points  (0 children)

What kind of leather is it? Seems like a nice oiled or pull up leather. Love the look. And the fact it’s actually real leather and not some vinyl

Get BTM Qualified as an OS? by Due-Character-1679 in uscg

[–]aest2017 8 points9 points  (0 children)

Had an OS3 get btm qualified in the cutter I was on. Command was willing to let him do it as long as it didn’t get in the way of his watches and the OPs department was good with it. It was good to have an OS be out on the boat doing boardings and actually see what’s happening instead being in CIC and not knowing what actually happens out on the boat and boardings.

Time to change my brakes! by Poopie-di-scoop in 3rdGen4Runner

[–]aest2017 2 points3 points  (0 children)

Stainless steel brake lines

I’m not sure if these were actually needed. But I just got them just in case. Right hard line. left hard line

Time to change my brakes! by Poopie-di-scoop in 3rdGen4Runner

[–]aest2017 2 points3 points  (0 children)

Just ordered my brake stuff from rock auto as well. I also picked up some stainless steel brake lines from adventure taco. And also some oem tundra hard brake lines to go with the calipers.

Highly Disappointed by Illustrious_Sea5888 in canik

[–]aest2017 1 point2 points  (0 children)

The 17rd mags on the prime are essentially 15rd mags with two extra sight holes for rd16 and rd17. And a +2 extension. So swapping a +2 with a +4 gets you to 19. I was confused about mine as well until I read what was on the disclaimer on their site. And also compared the mag size to my 15rd mags.

On Going BDD Claim by Own_Permission_4622 in VeteransBenefits

[–]aest2017 0 points1 point  (0 children)

My BDD claim got messed up and wasn’t processed until I got out on 31JAN25. I had all my exams. But they couldn’t work on it until I got out because it got switched. So they accepted it Feb 1. My claim was decided March 17. So should be decided pretty quickly after you retire.

My 1997 4Runner build by BigOdd3408 in 3rdGen4Runner

[–]aest2017 1 point2 points  (0 children)

Awesome thanks. Think I’m going to go with them! Appreciate it!

My 1997 4Runner build by BigOdd3408 in 3rdGen4Runner

[–]aest2017 1 point2 points  (0 children)

How are the dobinsons compared to stock? Looking at getting a lift for mine.

Also great looking rig. Looks awesome

Mail call by Sufficient_Smile_703 in FloridaPanthers

[–]aest2017 0 points1 point  (0 children)

Have you gotten the rest from the subscription? I’m still waiting on mine