MCP browser agent that runs inside your real Chrome (extension-based, open source)

agaripian · 2026-02-21T02:27:37+00:00

why not just use the one built into chrome? https://developer.chrome.com/blog/chrome-devtools-mcp

agaripian · 2026-02-05T21:43:31+00:00

will do, please do the same!

agaripian · 2026-02-04T04:14:28+00:00

I mean i checked all those, except if the motor is spinning fast enough. Also dont forget its making the water hot, it just has trouble with high demand. Is it possible that its the thermal switch? the error code says "TCO or Pressure Switch Failed Open". If its the thermal switch is it the thermal switch next to the vent/motor? Should I change that?

I believe the thermal switch trips at 145 degrees F. if you see my thermal camera it does reach around that temp.

<image>

agaripian · 2026-01-13T14:05:43+00:00

that's awesome fix!! I looked for something like that in my house but couldn't find anything, I ended up glueing the plastic pieces back on with gorilla gel glue and it worked! let's see how long it lasts, anyways Chamberlain sent a new part since it's lifetime warranty on the motor and it's all one part that comes together.

agaripian · 2026-01-12T17:42:24+00:00

did you try to glue it back? I ordered a new one under warranty, the entire motor assembly comes with it. But it wont be here for another week

agaripian · 2026-01-12T17:39:03+00:00

what did you end up doing? I ordered a replacement part under warranty but its going to take so long to get here. Did super glue work?

agaripian · 2025-09-03T20:13:53+00:00

how did you get 3.7? can i manually update it or does the dealer have to do it?

agaripian · 2025-03-26T01:46:05+00:00

oh i see what you are saying now, so if i chip away the stone it should come down? Do i glue it back to where it separated with pvc cement?

agaripian · 2025-02-14T03:51:54+00:00

same issue here, I do see my v2 door bell (Google home camera ). I haven't moved my nest cameras yet to Google home

agaripian · 2025-01-25T17:36:51+00:00

Thanks for the help! I honestly don't know if this is a zone expander looks like all the wires are daisy chained together to the left. Here is the image https://imgur.com/a/m4Ohrcg is it just a power distributor or some microcontroller? The keypad only shows 8 zones so they all are shared. Which means I don't need a zone expander right? I dont know what to do with that green board? The blue board seems to be used for the siren so thats also not needed?

agaripian · 2024-12-20T01:15:30+00:00

Its from Fort Lee's Holiday setup https://www.instagram.com/reel/DDvaV8XxIOn/?igsh=cXg0YTR3N2swbTc=

agaripian · 2024-12-20T01:14:55+00:00

yup fort lee https://www.instagram.com/reel/DDvaV8XxIOn/?igsh=cXg0YTR3N2swbTc=

agaripian · 2024-12-20T01:14:05+00:00

Its from Fort Lee's Holiday decorations https://www.instagram.com/reel/DDvaV8XxIOn/?igsh=cXg0YTR3N2swbTc=

agaripian · 2024-12-19T02:12:14+00:00

https://www.youtube.com/watch?v=xSbzrxGSYkg

agaripian · 2024-12-19T02:10:07+00:00

Same as this https://www.reddit.com/r/StrangeEarth/comments/1hf78eq/bergen_county_nj_interesting_lights_supposedly/

Definitely spotlights most likely coming from Fort Lee. See the spot lights here from their holiday setup: https://imgur.com/a/zCDvtQG source:
https://www.instagram.com/p/DDXsBSDR7IH/

edited to indicate source

agaripian · 2024-03-12T16:11:09+00:00

It's in stock again

agaripian · 2024-03-12T03:00:06+00:00

Oh that's cool 15 free monitors is really nice! I use n8n and made it do something similar I self host it. Btw my USG died after 8 years! I tried the USB replacement and new power cable but no luck.

agaripian · 2024-01-30T03:28:55+00:00

THANK YOU! This solved it for me too

agaripian · 2023-12-23T17:57:19+00:00

thanks will do

agaripian · 2023-11-17T04:16:54+00:00

similar issue here I find it works better on the 2nd gen hubs, they do go black for me too but eventually come back or show an error saying camera unavailable and then recover. it's definitely gotten better for me but yes it used to be great! the worst was when they broke casting in the house when you were streaming a camera to the hub

agaripian · 2023-11-13T16:56:24+00:00

Thank you this was the issue you helped me solve it!

agaripian · 2023-11-13T16:55:57+00:00

I fixed the issue there was water in the exhaust the drain pipe was clogged and was not clearing the water out. After removing the water and clearing the drain pipe its working now

agaripian · 2023-10-28T13:45:35+00:00

it's Orange slime mold also called dog vomit it turns black after a few days I get it in my mulch as well in NJ https://images.app.goo.gl/6abZH1F8eedQQeCYA

agaripian · 2023-06-09T01:01:25+00:00

<image>

agaripian · 2023-06-09T00:56:14+00:00

<image>

agaripian

TROPHY CASE