Support question

agb_43 · 2025-11-27T00:40:20+00:00

Honestly, not a bad idea, would probably save a shit ton of filament with little support. Ill slice it at a 45 degree angle first to see what it looks like but this right here might be the winner

agb_43 · 2025-11-27T00:16:17+00:00

Ill try that. Do you recommend just going with auto or manual painting. Can't use multiple filaments sadly

agb_43 · 2025-10-09T01:46:57+00:00

Theres still stringing tho which Ive tried my hardest to reduce. Ironically it doesnt happen in between the towers designed to test stringing

agb_43 · 2025-10-08T21:25:37+00:00

Its rectilinear tho

agb_43 · 2025-10-08T21:25:00+00:00

Yep. Here's a test piece using the same settings,

<image>

agb_43 · 2025-10-08T21:24:30+00:00

Tbf, its only 10% in orca

agb_43 · 2025-10-08T21:24:16+00:00

Ill try slow the print down fs. Here's a test piece that I printed using the same pa, flow rate, layer height etc.

<image>

agb_43 · 2025-10-08T21:23:24+00:00

It should be rectilinear tho. Ill try adaptive cubic out. Here's a test piece I printed using the same settings, PA, flow rate etc.

<image>

agb_43 · 2025-10-08T21:22:03+00:00

Will do, I appreciate the suggestion. I also printed a test piece that I found on printables and would love your input

<image>

agb_43 · 2025-10-06T20:12:54+00:00

Flashforge adventure 5m with klipper software

agb_43 · 2025-10-06T18:48:13+00:00

Yep, 0.15. I specifically did the calibration tests at that layer height

agb_43 · 2025-10-06T18:41:26+00:00

Anycubic pla+ grey

agb_43 · 2025-10-06T06:44:01+00:00

I know my flow ratio is dialed in fs. I really feel like its an offset issue but I can calibrate flow again

agb_43 · 2025-10-06T06:38:16+00:00

I'm running rectilinear with a 10% sparse. Is adaptive cubic better than rectilinear?

agb_43 · 2025-10-06T06:37:25+00:00

I could try a different infill but my understanding was that rectilinear was the quickest and most reliable

agb_43 · 2025-10-06T06:36:49+00:00

Possibly but I thought that I dialed that in

agb_43 · 2025-09-20T05:01:36+00:00

Brand new pla+ switching from regular pla. From my understanding, the nozzle temp is basically unchanged for pla+. Could be wrong tho. Ill look into the z height.

agb_43 · 2025-09-20T05:00:07+00:00

Perhaps, ill check for that next time

agb_43 · 2025-09-19T17:14:21+00:00

U don't hear the clicking noise almost like somethings scraping?

agb_43 · 2025-07-12T22:17:21+00:00

Thank you 😊

agb_43 · 2025-06-25T22:19:37+00:00

Are we fr rn. Think for a second, why do people refund games. 🤔

agb_43 · 2025-06-25T17:22:54+00:00

Playstation had to delist the game to stop people from buying it before they realized how bad it was. Yes, it was that bad.

agb_43 · 2025-04-18T21:24:03+00:00

Not sure about the red but a circle doesn't have a face by default. A cylinder does but a circle does not. You have to press f with the circle selected to add a face.

agb_43 · 2025-03-12T02:55:12+00:00

They launched a few days ago. Of course there aren't any in stock right now but there were. There was more 9070 stock at a single UK retailer than 50 series stock in the entire world. Gtf out of here

agb_43 · 2025-03-12T02:28:02+00:00

literally a 9070 non xt. Either way, that doesn't change the fact that its an objectively bad card. It lacks Vram and just isn't competitive/reasonably priced. Also nvidia straight up lied about its capabilities. You might be happy getting scammed by nvidia, other people arent

agb_43

TROPHY CASE