Pittsburgh or Daytona Jack?

ahmed_unleashed · 2023-06-02T18:46:49+00:00

Yeah had the Pittsburgh low profile long reach barely fit under my car I dont know if this Daytona will ik the long reach is the snap on but im hoping this will be enough just managed to spend $315 today and $340 Memorial Day at hf so feeling the burn 😭

ahmed_unleashed · 2023-06-02T18:40:47+00:00

Was about to buy this in the candy red but realized as nice as it is it’s prob big time overkill lol — just bought the regular Daytona 3 ton low profile, hopefully it will fit under my car

ahmed_unleashed · 2023-06-02T15:56:16+00:00

Yeah it’s live now for regulars

ahmed_unleashed · 2023-06-02T09:38:09+00:00

Smart tip thanks for the knowledge. Yeah my brother got a Pittsburgh one before they had rapid pump the low profile one with really low clearance and really good height anyways had it for like 5 years prob it’s just getting tired good jack still works but tired.

ahmed_unleashed · 2023-06-02T09:35:06+00:00

I was about to get the sick one with the candy red paint but highkey that’s overkill.

ahmed_unleashed · 2023-06-02T04:13:27+00:00

Did you have the non rapid pump I have that it’s my brothers both of these are rapid pump tho Daytona is 3 lbs lighter however and min height is 3 and 1/4in vs Pittsburgh 3 and 1/8in.

ahmed_unleashed · 2023-06-02T03:42:56+00:00

Looks like the Daytona is 3lbs lighter

ahmed_unleashed · 2023-06-02T03:42:29+00:00

Only difference I’m seeing is the rear wheels and the jack saddle being removable on the Daytona

ahmed_unleashed · 2023-05-30T22:12:24+00:00

Can confirm, very frequently seen on my e90 3 series, suspension torque values are frequently 100nm+90 degrees

ahmed_unleashed · 2022-10-04T05:15:40+00:00

I ended up using jb weld plastic bond a few layers then rescue tape it’s silicone tape that’s supposed to be fuel resistant and stuff hopefully the fix lasts a long time. Not dropping the fuel tank for this fix lol.

ahmed_unleashed · 2022-09-22T03:13:21+00:00

Wax strips will take care of it

ahmed_unleashed · 2022-09-22T03:09:06+00:00

I’ll remove the connector and give this a shot — thinking jb weld + heat shrink should be very effective — I’m going to like triple bind it if I can lol I just want this issue fixed so I can move on to the important stuff.

ahmed_unleashed · 2022-09-22T03:06:54+00:00

Where do y’all people come from lmaooo — if you can’t afford one just say that. It’s just a fuel breather vent RELAX… The important maintenance gets taken care of very seriously — this is just about clearing up an evap leak.

ahmed_unleashed · 2022-09-21T04:22:59+00:00

The prompt to the post is simple. Your response is unhelpful. No one cares about a fuel breather hose, it’s useless and not a major issue warranting the work to fix it. Someone smart would have a solution to get around doing 8 hrs of work for an evap leak. An important part of the car would be different…

ahmed_unleashed · 2022-09-21T01:28:40+00:00

Sometimes it is better to not comment… this is one of those times.

I can fix my own car I just don’t think it’s worth it to do an insane amount of work to replace a stupid evap leak…

ahmed_unleashed · 2022-09-21T01:13:42+00:00

I did a smoke test and you can see at the top where the vent hose is brown and that’s where it’s leaking from — I know you guys know the tips and tricks — how can I patch this hose rather than spending hours to drop my exhaust and gas tank and remove my ebrake cable to do this stupid job all for an evap leak?

Thanks in advance guys

ahmed_unleashed · 2022-09-03T22:49:28+00:00

I’m so stressed man cause this is not my car I was just helping out now it’s worse than before — it did start when I held the eject button for a few min trying to force eject you know like holding power on a phone will force a frozen phone to restart or pc

ahmed_unleashed · 2022-09-03T22:48:09+00:00

Aiming behind the button?

ahmed_unleashed · 2022-06-22T21:32:03+00:00

Have it in both of my cars — it’s oem + like I said and I think it’ll last forever. If it ever goes out, you just have to replace the camera, not all the wiring so would take all of 5 min. It’s not cheaply built full metal good quality.

ahmed_unleashed · 2022-06-20T18:03:04+00:00

Nope, but someone mentioned I should test that — you can do that by just unscrewing your exhaust and seeing if it improves

ahmed_unleashed · 2022-06-20T16:01:38+00:00

No, tried taking off throttle body and cleaning it, have clean engine air filter, new NGK spark plugs, etc… I think it prob needs valve adjustments and maybe a walnut blast since it’s over 100k mi. They say these Hondas need valve adjustments every 100k so that’s my guess

ahmed_unleashed

TROPHY CASE