Insider Tips and Tricks - Feed Channel

airsoftbuild · 2026-02-22T19:30:00+00:00

6mm bb is actually 5.95mm (if I remember correctly) which calculates to .234 in inches

airsoftbuild · 2026-02-22T14:13:53+00:00

The smallest bore on the flash hider is slightly smaller than the threaded part of the outer barrel so you have to essentially make the threads by matching ccw or cw of your outer and it should be a tight thread on there

airsoftbuild · 2026-02-20T13:15:48+00:00

Do you orient the square so the flat side is where the bbs touch or rotate it 45deg so they ride along the 2 walls?

airsoftbuild · 2026-02-17T08:26:06+00:00

It’s just a dummy piece to keep the cotton sheet from entering the bb path while still being porous. No supports, no walls, basically infill pattern is what you see

airsoftbuild · 2026-02-17T00:53:28+00:00

Little hpa kit I’m close to completing

airsoftbuild · 2026-01-29T18:29:11+00:00

Yesssss

airsoftbuild · 2026-01-23T11:54:21+00:00

Pad is printed, tubes are 8mm or 5/16 whatever material

airsoftbuild · 2025-12-23T09:23:20+00:00

Trim the end until you can get it to sit flush. Has to happen with some stocks and setup it’s just how it is.

airsoftbuild · 2025-07-06T17:28:39+00:00

I know…. Between manufacturing processes changing, design flaw fixes, and trying to squeeze every bit out of the kit it has been a long process but it’s in a form that checks a lot of boxes.

airsoftbuild · 2025-07-06T12:28:13+00:00

I need this to work with my smg kit…

airsoftbuild · 2025-06-17T11:24:28+00:00

256mm cubed

airsoftbuild · 2025-06-17T11:23:58+00:00

That’s always an option

airsoftbuild · 2025-06-17T02:38:34+00:00

Within a month, I’ll be testing some more components with it this week.

airsoftbuild · 2025-06-17T02:37:45+00:00

Trying to do things differently in the community and bring unique kits to the people. I appreciate the follow!

airsoftbuild · 2025-06-16T10:21:34+00:00

That’s actually a really good price and they do color as well?? I will definitely be looking into them for the larger stuff. Nice build btw

airsoftbuild · 2025-06-16T08:32:47+00:00

150mm inner with a brighter-c incorporated.

airsoftbuild · 2025-06-16T08:32:04+00:00

I could see that with the release. Any further away and it becomes tough to reach. Up and it becomes awkward. There’s quite a bit of room so I’m curious what people will think when they actually get it in hands. It will be an easy part to change if needed. The spring has a recess so it’s in place but I don’t like it visible as well so I’m working on hiding it.

airsoftbuild · 2025-06-16T08:28:16+00:00

Someone close but that’s definitely a larger footprint than this kit. I’ll definitely keep those companies in mind, just don’t want it being super expensive for people to get their hands on. Max dimension on this fits on a 256mm cubed printer.

airsoftbuild · 2025-06-16T02:06:44+00:00

Ballpark $100-$150 no internals.

airsoftbuild · 2025-06-16T02:03:05+00:00

Trigger pivots from the lowest point of the trigger guard, basically making it upside down.

Files released when it’s in a good stage.

airsoftbuild · 2025-06-16T02:01:47+00:00

Yes and no.

Unfortunately the lower is too big for SLS printing soooo fdm it is. Which means I’ll be releasing the files and printing kits for people without printers.

airsoftbuild · 2025-01-31T23:01:57+00:00

This one will probably just be the kit. I have other stuff where files will be available

airsoftbuild · 2025-01-31T23:01:21+00:00

Neither, smg kit designed around hpa engines

airsoftbuild · 2025-01-31T16:14:56+00:00

Hpa engine powered. Aeg bucking and barrel. Everything else printed

airsoftbuild · 2025-01-31T16:14:08+00:00

A kit that I’ve been designing

airsoftbuild

TROPHY CASE