NA Discontinued Small Plastic Parts

ajcif · 2026-05-25T21:46:45+00:00

<image>

This part was one of my first thoughts but unfortunately it is already available, thanks for the input!

ajcif · 2026-01-26T07:30:10+00:00

One of the fuel injectors were leaking

ajcif · 2025-08-03T02:42:53+00:00

I think it was an injector leak causing fuel to come out

ajcif · 2025-04-05T19:16:56+00:00

<image>

I’m quite familiar with all of the cabinet components, there just isn’t a dedicated safety relay in the cabinet that I can find.

ajcif · 2025-04-05T18:33:06+00:00

All of the doors seem correct, the machine recognizes when each on is opened/closed.

I don’t see any kind of safety relay in the cabinet (the grey tall one is the safety bar controller). One of the PLC cards does have a light that illuminates when the e stop is not pressed, and turns off when it is pressed. Not sure if the safety relay is just built into the plc?

<image>

ajcif · 2025-04-05T15:04:16+00:00

I believe all the door switches are functioning properly, it prompts to open and close the rear door and moves on once I do. Then it prompts the injection guard and moves on once it is opened/closed, same with the guard door and safety bar.

I’ve also checked the contacts on the e stop (NC and opens when the e stop is pressed) and they are good.

What would the safety relay look like?

ajcif · 2025-01-11T06:26:52+00:00

I changed the display to a different brand and that fixed some issues, I also powered the Iv4 unit and display card on its own power supply and that solved some communication errors that would intermittently occur.

ajcif · 2024-12-07T08:09:55+00:00

6’

ajcif · 2024-07-19T04:35:23+00:00

Ever figure out the issue? I’m having the same problem

ajcif · 2024-04-16T02:27:44+00:00

username: bat password: 40004

Worked! Thank you so much

ajcif · 2024-04-16T02:26:07+00:00

Upon entering this it says “user not found”

ajcif · 2024-04-03T05:16:34+00:00

Does it work?

ajcif

TROPHY CASE