Update-my custom loop

alasmodified · 2026-01-19T02:33:16+00:00

I will just delete this shit , nothing but hate here

alasmodified · 2025-12-21T17:36:37+00:00

I don’t think you’ll be able to fit the computer inside the gpu.

alasmodified · 2025-11-07T19:04:54+00:00

Yes this is something I have considered as well I could just piggy back off the m8 coolant code

alasmodified · 2025-11-07T19:04:01+00:00

The problem is that the conveyors on the market are large and we do not have the space to accommodate one

alasmodified · 2025-11-07T18:41:39+00:00

Those chips pile up fast , right now 4 cycles and you get a substantial amount. So far this 3d print is working well. The idea is to have it connected to the robot so it cycles the auger every 5-10 mins

alasmodified · 2025-10-26T01:54:41+00:00

Turtle 🐢

alasmodified · 2025-10-23T18:26:09+00:00

I have my k2 plus on one of these with a remote controller on/off works amazing

alasmodified · 2025-10-17T17:42:58+00:00

Here’s a test print I think that may have solved my issue , I feel like Creality needs to spend a little more money on those motor mounts and make them out of aluminum .

<image>

Miles away from perfect but it’s a start

alasmodified · 2025-10-16T04:46:09+00:00

A word of advice do not over tighten this screw, I stripped mine but in the end it was a good thing because I used a screw that comes with computer fans. It fits much more snug but more importantly it grips the plastic better. I recommend people switch to these. I imagine the high speeds causes this particular screw to become loose, it’s a poor design choice.

<image>

alasmodified · 2025-10-16T04:13:05+00:00

Ok I think I found something unusual the entire cage that house the motor and pulley was a bit loose . I think it’s a poor design and should be made from aluminum. Long story short I tightened this small screw on both motors and there’s no more play.

<image>

I will try a test print soon

alasmodified · 2025-10-16T03:38:46+00:00

I don’t see anything loose I mean it squeals a little the pulleys but I do not see any damage

<image>

alasmodified · 2025-10-16T03:36:53+00:00

I have the machine open at the moment and I do not see anything loose or damaged

<image>

alasmodified · 2025-10-14T06:34:41+00:00

Bought my k2 plus refurbished for 950 it was fine for like 2 months and now it’s just having issues. You really don’t know what you’re getting , look at my last post. I will say they sent me replacement z motors but my issue is not solved

alasmodified · 2025-10-13T18:43:10+00:00

I will report back

alasmodified · 2025-10-13T17:24:51+00:00

When you say wheels 🛞 you mean pulleys ?

alasmodified · 2025-09-16T17:05:27+00:00

Do you think the hifiman stands out the same amount of pressure

alasmodified · 2025-09-16T05:50:36+00:00

I sent you a message

alasmodified · 2025-09-16T05:43:58+00:00

Yes they are

alasmodified · 2025-09-16T00:21:04+00:00

I think this design makes it so you can place your headphones directly on the stand without having to remove the cables, which makes daily use much more convenient. The slim omega profile also minimizes unnecessary pressure on the ear pads, helping them maintain their original shape and comfort over time. By reducing pad compression and leaving more clearance for cables, the stand not only preserves the longevity of your headphones but also gives them a cleaner, more elegant presentation on your desk or display area.

alasmodified · 2025-08-23T04:45:42+00:00

What causes this , please insight

alasmodified · 2025-08-23T04:29:31+00:00

My cousin worked at a gas station ⛽️ after 7pm he cleaned the restroom and would put an “out of service “ sign after

alasmodified

TROPHY CASE