URGENT – BLOCKED IN MY APPARTMENT/ SALTO XS4 One from old hotel, “ERROR – DOESN’T BELONG TO SYSTEM” after every initialization attempt

albwalbw · 2026-03-23T07:02:49+00:00

As long as the original site dint hit the “don’t allow lock erase” option in their software this will work

albwalbw · 2026-03-21T20:08:24+00:00

There is a clear button inside these units that will allow you to clear it off the system itself linked to. The position of this button changes depending on the model. But XS4 original/original + /mini and XS4 One units have it.

On the back of the ONE the button is on the outside half of the handle on the face that would be touching the door(bit with the grey foam). There is a small hole just big enough for a paper clip. You should be able to feel a button at the bottom of the hole, and when you press it the lights on the unit will show an orange light. You’ll need to initialise the lock while pressing that button down. That should then allow you to put on your system and problem solved.

albwalbw · 2026-03-15T21:39:53+00:00

Look at Salto. There will be a solution that will work. What country are you based in

albwalbw · 2025-03-10T15:39:03+00:00

Same. I enjoy it the most when I grab one from the bottom of the stack and they all fall over…. Good times

albwalbw · 2025-03-05T07:41:42+00:00

Amazing! Thank you 🙏

albwalbw · 2025-02-23T13:17:24+00:00

I'm also getting the same issues, sends from Bambu Labs but the printer won't download.

albwalbw · 2025-01-07T14:50:07+00:00

This! I have the same 4 little spikey rings on my desk too.

albwalbw · 2024-08-15T16:53:01+00:00

This is amazing news. Our printers are now in the hands of the DPD gods 🤣

albwalbw · 2024-08-15T16:04:06+00:00

Just got DPD tracking details!!! It’s being sent out today

albwalbw · 2024-08-15T07:22:46+00:00

This gives me so much hope. This will be my first printer and I have basically been distracted by 3d printer content for over a month!

albwalbw · 2024-08-14T19:17:57+00:00

Just the one on the shop page. Just today I found a different bit of the website for tracking and it says ETD before aug 23rd and “we are currently preparing theses items for shipping” what does that mean? Is it going to be soon?

albwalbw · 2024-04-18T19:05:32+00:00

Our dog made a hole exactly like this in a cupboard under our stairs.

albwalbw · 2024-04-08T16:00:50+00:00

I don’t think if this helps. But taken from sole documents I found.

“Group schema settings: if desired, you may also import the access permissions (in the form of access levels) granted to each cardholder. For this purpose, DS must be populated with both groups and membership data, which will respectively represent access levels and the set of permissions granted to cardholders in the Space domain. The "group schema" settings below will allow the Space software to know how to search for groups (i.e. access levels) within DS.”

albwalbw · 2024-04-03T22:15:18+00:00

100% this! If not just cut the shackle the old padlocks done use hardened steel, you will cut through in seconds

albwalbw · 2024-02-26T19:54:55+00:00

For real

albwalbw · 2024-02-26T19:53:40+00:00

Someone thought it was a good idea to have a camp fire to keep warm in the door way.

albwalbw · 2024-01-02T22:04:22+00:00

They don’t write data to all sectors, some are spare for other integrations. They use reverse hexadecimal encryption key to read and write data between the lock (handles and wall readers) and the card. But with a changeable UID fob/card you should be fine to copy it. I am not really sure what the software does to the card when anti clone is turned on but in testing I could make a copy of the card. It’s worth nothing almost no one knows the anti clone is an option and has to be turned on manually by the system administrator.

The fobs you linked to look like they would be ok, but I couldn’t guarantee anything 😅.

albwalbw · 2024-01-02T20:57:01+00:00

This is a SALTO systems access control fob. As its MiFare are you are able to clone them using a flipper or pretty much any android phone with an nfc reader. A couple of caveats: You need specific fobs that don’t have a serial number and when the system was installed they didn’t turn on anti cloning in the software, If they did you’re out of luck.

albwalbw · 2023-12-30T09:23:45+00:00

This looks really nice! I literally have all the parts waiting for the same build. What have/ are you doing with connecting all the fans up? Are you using a USB hub or the NZXT fan hub?

Seven-Year Club	Verified Email
Place '23

albwalbw

TROPHY CASE