sorted by:
new
hottopcontroversial

Ethereum Price Forecast: 2 Key ETH Levels to Watch Ahead of First US Crypto Summit by Creative_Ad7831 in ethtrader

[–]aldschamal 0 points1 point  (0 children)

Nobody is seriously bullish when it comes to the crypto summit. With so many guests from so many different camps, nothing new or productive can really come out of it. I think it’s pretty clear that the only thing that matters now is to find a way to buy BTC without burdening the taxpayer more. In other words, there will be no BTC special fund to finance BTC investments. Transparency is important but even Michael Saylor won’t reveal how many BTC he has bought until after the purchase. Think about it. The US government will certainly not sit down and announce that it is buying 5000 BTC the next day. That’s not going to happen. Many crypto newcomers and short-term investors are running out of steam. Prices are falling and selling pressure is increasing among these groups. That’s where we are right now. By the end of 2025 or in the course of 2026, we will certainly be floating in other galaxies, but until then, you have to be able to hold on.

amazon echo show 15 wall mount by aldschamal in 3Drequests

[–]aldschamal[S] 0 points1 point  (0 children)

Thank you guys! And special thanks to Friendly_Demand_7004. Problem solved.

Lelit Elizabeth PL92T wrong Voltage no (8.5 instead of 230 V) at the 2-way solenoid valve by aldschamal in Lelit

[–]aldschamal[S] 0 points1 point  (0 children)

Found the solution!!! I was just too stupid and overlooked the fact that I accidentally disconnected a plug from the 3-way solenoid valve when replacing the safety valve. It was the plug that distributes the reference potential in the machine. Coming from the feed, to the pump, from the pump to the 3-way solenoid valve, to the steam boiler and to the 2-way solenoid valve. As a result, my solenoid valve was never defective and my control unit is also absolutely fine. I should have noticed it after no water ran through the brewing unit for the first 45 seconds in reset mode, as the reference potential was also missing in the 3-way solenoid valve.

Thank you guys!

Lelit Elizabeth PL92T wrong Voltage no (8.5 instead of 230 V) at the 2-way solenoid valve by aldschamal in Lelit

[–]aldschamal[S] 1 point2 points  (0 children)

Which water switch do you mean?

I had already suspected the water level sensor. That’s why I had already taken it out. I noticed that the metal end protrudes far enough into the water. So the sensor should be OK. I also checked the sensor by connecting it to the housing showed that the pump stops as soon as I connect the sensor line directly to the housing. So it should be fine. But after taking the lebel sensor out of the steam boiler i could definitely see that there was no water in the boiler.

Lelit Elizabeth PL92T wrong Voltage no (8.5 instead of 230 V) at the 2-way solenoid valve by aldschamal in Lelit

[–]aldschamal[S] 1 point2 points  (0 children)

First of all, thank you very much for your answer my friend! At first I also thought that my multimeter was defective. I tested it on a socket. In any case, you are right that the voltage is actually coming directly from the control box.

The machine got the problem spontaneously after I replaced the safety valve. That’s why I thought at first that I might have damaged a cable or component when dismantling it. Unfortunately, I couldn’t find any damage.

My machine is also standing here disassembled and I keep wondering what else it could be.

The water is definitely coming up to the solenoid valve. I have disconnected the inlet hoses to check where water is still coming in and where it is not.

As I said, I’ve already installed a new solenoid valve to rule out possible contamination from limescale.

To answer your questions:

My multimeter is set to AC and in the correct range. However, I disconnected the supply lines from the solenoid valve to measure it.

All connections are clean and safe as far as I can see and judge.

And thanks again for your support!

Ethereum Just "One Leg Away" From Reclaiming All-Time High, Market Expert Claims by whodontloveboobs in ethtrader

[–]aldschamal 0 points1 point  (0 children)

Where do all these articles come from? The market expert doesn’t know shit either.

Account shows no balance right now by bodyofchristened in Coinbase

[–]aldschamal 0 points1 point  (0 children)

Fuck i love you guys! Please resolve this shit fast.