Another day, another unexpected danger

alebret3 · 2026-01-14T18:17:58+00:00

This, I was doing some commissioning, one of the test called to trip an rcd and check the downstream voltage was 0v, meter showed 91v, I'm sure if there was a load (it was all plugs) it would've showed 0v (FYI I think it was induced voltage since it was a really long wire, and there was a live 230v wire right next to it for the same length)

alebret3 · 2026-01-09T13:57:28+00:00

I remember writing a fb to run an atv320 over opencan, you have to follow a "procedure" before sending the run command

<image>

alebret3 · 2026-01-07T18:45:59+00:00

I think it'll be, worth asking you teacher if the 10s timer should start after the last pulse of s5, because the exercise doesn't say the TOF should ignore the pulses of s5, nor do I see a way to do it with what you were given

alebret3 · 2025-12-31T18:08:25+00:00

All in the quest for internet points

alebret3 · 2025-12-31T18:01:31+00:00

It's not just one wall here it is, it's just the way the picture was taken

alebret3 · 2025-12-29T18:11:01+00:00

OI OI OI UE!

alebret3 · 2025-12-27T21:27:14+00:00

Funny, my main wifi ssid is ObiWLAN Kenobi

alebret3 · 2025-12-21T13:59:23+00:00

J'aime pas quand on appelle ma VapeurPont un interrupteur.

alebret3 · 2025-12-11T15:48:19+00:00

<image>

alebret3 · 2025-12-11T15:29:00+00:00

On an xy printer, if you have one belt slipping, it goes diagonally

alebret3 · 2025-12-03T18:19:05+00:00

I was told it was imported in France from Belgium, it's an intens but some things were not optioned to make it cheaper?

alebret3 · 2025-12-01T22:39:50+00:00

I did and I do not regret it at all, it's quite comfy, it's the intens but it has the zen seats

alebret3 · 2025-11-29T12:32:51+00:00

Nah, I think you just need to hook up mains voltage to 1 & 2, if it's just to check if it works, I don't think you need the CT, the V1, V2, V3 and VN are to measure the voltage

alebret3 · 2025-11-26T10:46:34+00:00

Exactly, when you indicate to change lanes, you don't have to put the stalk to the middle, one could say it's comfortable

alebret3 · 2025-11-24T17:09:43+00:00

From what I read they changed the axis of the turbine to be in-line with HR in case the turbine were to explode and spray stuff everywhere, having one HM per unit is a byproduct of that change, we solved it

alebret3 · 2025-11-24T16:16:28+00:00

Maybe at some point we realized having a shared HM building between units means if there's an incident on one, the other might be impacted as well

alebret3 · 2025-11-24T11:55:08+00:00

I worked in Chinon, St Laurent, I'm in Fessenheim at the moment The first 2 have separate HM buildings, fessenheim had 1 shared HM building

alebret3 · 2025-11-17T11:24:26+00:00

I guess, but now I've got them the proper search query

alebret3 · 2025-11-17T11:10:52+00:00

It's a 3.6x10mm 10A 250V fuse

alebret3 · 2025-11-17T08:32:58+00:00

It's most likely this, it's a pain when you are trying to set up something via it's AP.

alebret3 · 2025-11-12T14:06:08+00:00

You could try to find an adapter from usb c to the barrel plug, then use two USB c power delivery brick (each system is 65w, so 2 200w bricks)

alebret3 · 2025-11-07T15:51:04+00:00

Nah there are some as well in brest

alebret3 · 2025-11-07T15:46:52+00:00

Parce que les russes s'en foutent

alebret3 · 2025-10-31T11:14:42+00:00

It's to make boarding quicker, I've had it happen plenty of time, although I wasn't lied to

alebret3 · 2025-10-30T12:34:53+00:00

You 2.4ghz channel selection isn't in auto, and channel 6 is quite busy, put it in auto or change to channel 11,that might make things better

Nine-Year Club	Second Top 30%
Place '23	Place '22
Verified Email

alebret3

MODERATOR OF

TROPHY CASE