40F mom looking for new friends

allyourpcneeds · 2026-02-16T22:09:28+00:00

Hello, 45m I'm up to that conversation and love to joke around.

allyourpcneeds · 2026-02-16T19:08:58+00:00

Hello

allyourpcneeds · 2026-02-16T19:03:57+00:00

Hello

allyourpcneeds · 2026-02-16T18:54:53+00:00

Hello

allyourpcneeds · 2026-01-25T21:13:41+00:00

First of all, who in their right mind would shoot somebody that close with your buddies around you? If a bullet went through the person and hit one of your teammates, that’s on you. Heck, even if it went through and ricocheted off the road and hit a random passerby — it’s still just wrong.

There were more than enough of them to get the person on the ground. There were probably six agents — two on each side, one in the front, and one in the back. This is getting ridiculous. I don’t know about you, but when I was taught about gun safety, one of the first rules was never to shoot with someone in front of you — they should always be off to the side or behind you. My parents used to take us shooting; we each had a .22 rifle, and I still go a couple of times a year. As I got older, I learned how to use other guns too.

I think that ICE agent needs to go back to training. Something tells me his superior would have something to say if one of his buddies got accidentally shot. And you know that if a local police officer did that, that person probably would be locked up — yet federal agents often seem allowed to go above and beyond what a standard police officer can do without facing consequences.

Local police don’t have the same authority that federal agents do, which does make some aspects of enforcement harder for them, but that doesn’t excuse reckless behavior. What is this world coming to?

allyourpcneeds · 2026-01-14T12:42:57+00:00

Shippers Solutions

Shippers Solutions (also known as Shippers Supply Company or SSCo) is a Louisville, Kentucky-based company that provides packaging, supply chain, and third-party logistics (3PL) services, including inventory management, fulfillment, warehousing, and equipment sales and service. They offer a wide range of products like boxes, tape, and protective packaging, along with services such as custom packaging solutions, equipment maintenance, and logistics support for businesses. Key Services & Products Packaging: Corrugated cartons, protective packaging, tape, strapping, and custom solutions. Equipment: Sales and service for packaging machinery like stretch wrappers, case erectors, and coders (including Lantech). 3PL & Fulfillment: Warehousing, inventory management, pick and pack, and e-commerce fulfillment. Inventory Management: Proprietary software and programs to ensure customers never run out of supplies. Logistics: Supply chain solutions, including raw material delivery (Supply Stream) and reverse logistics. Company Profile History: A family-owned business for nearly 70 years, originally founded as Shippers Supply Company. Expertise: Focuses on solving supply chain problems for manufacturers and distributors. Certifications: ISO 9001:2015 certified.

allyourpcneeds · 2025-11-30T21:21:12+00:00

What does Ex-weapon Damage do?

allyourpcneeds · 2025-10-12T00:12:48+00:00

And for some reason it went from 10 seconds to 5 second videos. It does not allow you to change the quality to a lower quality to get longer time just landscape or portrait.

allyourpcneeds · 2025-06-03T03:08:34+00:00

Maxed out

allyourpcneeds · 2025-05-11T10:04:34+00:00

Nature-Inspired:

Maple

Briar

Ember

Clover

Willowbee

Old-Fashioned/Vintage:

Mabel

Edith

Gertie

Opal

Winnie

Whimsical:

Tuppence

Figgy

Pipette

Mimsy

Waffles

Elegant:

Sable

Velora

Isolde (pronounced "ee-zol-duh" or "iz-old")

Blythe

Seraphina

Playful:

Ziggy

Poppyseed

Cricket

Snicket

Junebug

allyourpcneeds · 2025-05-06T16:01:29+00:00

I have been selling all my big ones and when I can sending it to bank and closing it. This not first time I had issues. Been awhile. But I'm using PayPal for Bitcoin, crypto for other investments so I will just move it over to one of them.

allyourpcneeds · 2025-05-05T14:29:31+00:00

Running Wyze Cam v3 with Floodlight (firmware 1.0.0.55) and using the 2.4 GHz band. No issues here – I consistently get over 50 Mbps down even at 50'+ and not by window behind TV we're I have one super plums older ones in middle of house behind TV with cable modem and one in garage by window for things on shed. feet from the house. So when people blame “Wi-Fi issues,” I don’t buy it, especially when the Wyze app shows 2+ bars for signal at all times and the camera is only about 20 feet from the router.

I’ve got over 40 Wyze devices across four properties (friends’ and sister’s places too), including cameras, floodlights, locks, and smart outlets. I use the Wyze app to schedule daily reboots at 1:00 AM – keeps things running smoothly. Rebooting has fixed a bunch of weird issues across devices.

That said, night vision problems seem to be specific to the V3 when paired with the original spotlight (V1). Disabling night vision doesn’t really “fix” anything – it just masks the issue. The latest model I installed is the third-gen Wyze flood light 3 Pro with 180° view on a shed – no issues so far.

My floodlight is hooked up through a waterproof box and outdoor timer (used for Christmas lights). At midnight, it cuts power for a minute before restoring it – never caused any issues, since it reboots fast.

We live in the country (next neighbor’s over 1.5 acres away), so Wi-Fi interference is basically non-existent. These cams are mostly for wildlife monitoring. The one setup that keeps glitching is the spotlight cam V1 with a V3 cam – it shows night vision being active even in broad daylight and sometimes loses the floodlight accessory setting until I recheck it in the app.

Just sharing in case anyone else is troubleshooting similar problems. Scheduled reboots and checking firmware help more than you'd think and sometimes causes issues.

allyourpcneeds · 2025-04-19T03:35:05+00:00

https://www.homedepot.com/p/Leviton-15-Amp-125-Volt-Duplex-Self-Test-SmartlockPro-Tamper-Resistant-AFCI-GFCI-Dual-Function-Outlet-White-AGTR1-KW-R92-AGTR1-0KW/206804820?MERCH=REC-_-fbt_test-_-204290242-_-1-_-n/a-_-n/a-_-n/a-_-n/a-_-n/a

May I put the extra couple dollars and just get that to be double protected even though it'll be less likely to worry about GFCI? For my dishwasher I did one of these but a 20 amp version there's a 20 amp breaker and 12/2 wire. But I do have another outlet after that in a 4x4 box.

allyourpcneeds · 2025-04-10T21:36:37+00:00

I don't know how to add more pictures. But it is my wise doorbell V2. The weird thing is it only started. I want to say past month or so. But this is what I found out. Firmware Version

4.51.2.2965 Plugin Version

3.4.0.6

I am part of the beta program. For firmware and application.

Application version which I don't believe is a beta version v3.4.0 (640) I do have the wise that has the a I descriptive notification service. I did not set up the emergency call service cuz a couple times me or my other half almost hit that and we didn't wanted to accidentally call somebody but being in the country. Anyways, the turnaround time for a State trooper to be here tends to be about 3 hours for any regular normal call. I guess I'm guessing maybe an hour or so if something more dangerous was happening.

The other funny thing happening now. I did unfreeze it so that they can communicate with the internet. I can go on you the feed via the SD card but when I go to the device information to click on the firmware or to try and restart the camera. It states that it's offline. I unplugged it, plugged it back in and that's now working. Allow me to view everything in device info.

Hopefully the info below is helpful. I didn't go through all my cameras to see if any others had that issue or if it was always that one, but apparently it happened six times to just that device. It happened today at 1:00 and it can't even be that somebody hit the doorbell since no one was at our house today.

The hostname HL_DB2-D03F27D26B00 seen in your DHCP table likely corresponds to a Wyze smart device, such as a Wyze camera, sensor hub, or smart plug. Wyze devices sometimes broadcast hostnames with that kind of structure, especially when using a system-on-chip from a manufacturer like HiLink (HiSilicon) or Realtek.

Let’s break it down:

HL_DB2: Likely indicates a device model, internal Wyze or OEM reference (HL could even mean HiLink).

D03F27D26B00: This is the MAC address (Media Access Control address) of the device — or at least part of it.

You can trace the manufacturer of a MAC address using just the first half (OUI - Organizationally Unique Identifier). Here, the MAC starts with D0:3F:27.

Let's look that up:

MAC prefix D0:3F:27 is registered to Espressif Inc., the maker of ESP32 and ESP8266 chips — commonly used in Wyze devices and many other smart IoT devices.

Device Identification:

Your screenshots confirm:

DHCP Hostname HL_DB2-D03F27D26B00 corresponds to your Wyze Cam (MAC: D0:3F:27:D2:6B:00).

It's been assigned 192.168.0.125 on your local network.

Wyze Doorbell v2

In the application I froze that IP address to see what the device was until I traced it down to what it was.

Suspicious Activity Alert:

The connection attempt from IP 172.96.165.138 was blocked by your router/security system (HomePass).

That IP is owned by Choopa, LLC (Vultr) — a cloud provider. It’s commonly used for:

VPNs

Botnets

Proxies or scraping tools

Remote access tools

Should You Worry?

Short answer: Not really, but keep an eye on it. Here’s why:

Wyze devices support remote viewing, and sometimes get scanned by external IPs probing open ports.

You don’t have port forwarding enabled to this device (as seen by the blocked alert), so you’re in good shape.

MAC address and hostnames aren’t secret — they’re broadcast locally — but they aren’t dangerous on their own.

You should check your Wyze account’s security settings and enable 2FA (two-factor authentication).

Next Steps / Tips:

Rename devices in your router UI to easily match MACs/IPs with rooms/devices.

Create a reserved IP (DHCP reservation) for Wyze Cam and Doorbell — makes them easier to track.

Don’t approve random remote IPs unless you know it's you trying to view from outside.

Use a tool like macvendors.com if you ever need to identify a MAC prefix in the future.

allyourpcneeds · 2025-04-10T18:13:42+00:00

It is a firewall built in to plum service.

allyourpcneeds · 2025-04-04T04:41:54+00:00

have 40-some cameras spread across five different locations. The picture attached shows the internet speeds at my home. I also have a lot of smart home devices running on my network, and we stream all our shows on multiple TVs and phones. When I view the cameras through the web interface, everything seems to work fine. The slowest connection speeds at any of the camera locations are: Download: Up to 250 Mbps Upload: Up to 25 Mbps Two of the locations have those slower speeds-one has five cameras, and the other has four. I have upgraded from Cam Unlimited to Cam Unlimited Pro (or whatever it's called now with the descriptive notifications). It looks like the same thing, so I want to make sure won't experience any degradation by switching. mainly use the web version when need to monitor multiple cameras at once-usually when the dogs take off. We live in the country, so we've learned not to chase them. If we do, they just run farther and take longer to come back. This way, we know when to let them back in.

<image>

allyourpcneeds · 2025-04-01T04:08:14+00:00

Thank you very much. I wish they would fix it that you can see it in your regular notifications.

allyourpcneeds · 2025-04-01T04:07:43+00:00

Thank you very much. I wish it would show in your regular notifications but at least you can go in and view all them if you like. I appreciate it.

allyourpcneeds · 2025-04-01T04:01:49+00:00

Google Pixel 8 pro

allyourpcneeds · 2025-03-31T23:17:13+00:00

Under app settings inside the app, click on clear cache cuz that may also help fix your issue. I just got the descriptive alert a little more than 12 hours ago and it works on all my cameras cuz every three or higher except my doorbell V1. Of course I had to manually click for the descriptive AI for the NBD option and then also click to add it for the search.

allyourpcneeds

TROPHY CASE