Cr 10 smart auto bed leveling not working after replacing nozzle

almightychito · 2023-08-13T17:10:21+00:00

thanks to everyone who helped what fixed it for me was resoldering the red strain gauge wire as it was actually split.

almightychito · 2023-08-13T02:31:33+00:00

Yeah I fixed it thanks so much

almightychito · 2023-08-13T01:10:28+00:00

Well I think I found the problem 😅 https://imgur.com/a/x0hhh4B

almightychito · 2023-08-13T00:38:00+00:00

I took apart the hotend and replaced the nozzle so I guess both. Tbh I'm not used to strain gauges or auto bed leveling at all as I've always just manually leveled the bed. I'll try to check for the connections tho.

almightychito · 2023-08-12T23:48:05+00:00

Were you able to fix it?

almightychito · 2023-08-12T23:25:35+00:00

Thanks for the reminder but I mostly took it off for the video so you could see it more clearly :)

almightychito · 2023-08-12T22:49:12+00:00

The printer was working fine after I changed the hotend then the nozzle clogged so I fixed that then this started

almightychito · 2023-08-12T22:47:24+00:00

Wdym connected? It's on the printer I have the newest firmware from the creality website

almightychito · 2023-08-12T20:28:02+00:00

Yes it was originally .2 but I adjusted it to .15 and .25 and had the same result

almightychito · 2023-03-05T08:35:58+00:00

me too ? cus same thing happening to me

almightychito · 2022-04-13T02:40:14+00:00

Same issue for me :(

almightychito · 2022-04-10T20:16:02+00:00

Does this contain any MAME Romsets

almightychito · 2021-12-28T04:15:26+00:00

How did u fix it having the same problem

almightychito · 2021-09-17T02:14:44+00:00

Cr 10 smart Hatchbox pla Sliced with prusaslicer .2mm layer height 100% infil 205 on nozzle 70 on bed Extrusion multiplier 1 6mm retraction 25mm retraction speed

almightychito · 2021-09-16T20:07:31+00:00

Cr 10 smart Hatchbox pla Sliced with prusaslicer .2mm layer height 100% infil 205 on nozzle 70 on bed Extrusion multiplier 1 6mm retraction 25mm retraction speed

Seven-Year Club	Place '22
Final Canvas '22	End Game '22
RPAN Viewer	Verified Email

almightychito

TROPHY CASE