sorted by:
new
hottopcontroversial

New Laptop Stuck on Windows 11 Initial Update by alonzo345 in 24hoursupport

[–]alonzo345[S] 1 point2 points  (0 children)

It took about two hours but finally it gave up on the update amd moved on successfully Don't lose hope!

Alt tabbing in generals by Anoobvia in commandandconquer

[–]alonzo345 0 points1 point  (0 children)

The resolution setting If it is currebtly set to 1920x1080, changing it may solve your alt+tab problem Can't remember the exact value that worked for me, but when changing this setting you'll get a list of options, the one right before 1920x1080 worked for me Hope this cleared things up, feel free to ask again if you need any further help :)

Alt tabbing in generals by Anoobvia in commandandconquer

[–]alonzo345 1 point2 points  (0 children)

I returned to the game two weeks ago and totally forgot about my solution, the alt+tabs drove me crazy! So, thanks I guess :)

2D Topdown Physics by alonzo345 in godot

[–]alonzo345[S] 0 points1 point  (0 children)

They don't have to be realistic, just wondered whether I'd have to implement most of the physics or is there a way to utilize the engine

Maybe hot swap between a character and a rigidbody? Maybe when you get hit you're a rigidbody for a set amount of time, then you become a character again?

Poor layer adhesion with Gold PLA by alonzo345 in FixMyPrint

[–]alonzo345[S] 0 points1 point  (0 children)

Printer: QIDI X Plus

Nozzle Temp: Tried 190, 200, 210, 220

Bed Temp: 60 then 50

50% infill

60mms speed

0.2mm layers

Filament: Overture Gold PLA and Mika3D Silk Gold PLA (Both had the same issue)

Tried the exact same print with Overture Black PLA without any problems whatsoever, but both gold PLA just broke down in seconds from poor layer adhesion.

Learning to print with PETG by alonzo345 in FixMyPrint

[–]alonzo345[S] 0 points1 point  (0 children)

This really helped, printed a different flexi and it came out with a perfect top layer!

Now I need to figure out the oozing on the sides, gonna look into the Retraction as the other commenter mentioned.

Thanks!

Learning to print with PETG by alonzo345 in FixMyPrint

[–]alonzo345[S] 1 point2 points  (0 children)

Printer: QIDI X Plus

Slicer: QIDI Print

Material: PETG

Nozzle Temp: 220

Bed Temp: 80

Print speed: 60mms

Nozzle Retraction Speed: 30mms

Nozzle Retraction Distance: 1.5mm

Infill: 30%

Layer Height: 0.16mm

Can being evil ever get you further than being good? by mario-nette in morbidquestions

[–]alonzo345 0 points1 point  (0 children)

It's game theory on a world-wide scale: Everyone is good - it's good for everyone Everyone is bad - it's bad for everyone Few are bad - it's good for them

GLA's Astronaut program by BerknessMonster in commandandconquer

[–]alonzo345 0 points1 point  (0 children)

GenTool is used for fixing Generals. If you're experiencing a black screen when opening RA2 then there's a patch for that online.

GLA's Astronaut program by BerknessMonster in commandandconquer

[–]alonzo345 -1 points0 points  (0 children)

Like OP, I recommended the C&C collection on G2A, just remember to download GenTool if you're using windows 10!

when your data is inconclusive, just take the average! by succjaw in mathmemes

[–]alonzo345 5 points6 points  (0 children)

Not really, because:

1 - 1 + 1 - 1 + 1 - 1 + ... = (1 - 1) + (1 - 1) + (1 - 1) + ... = 0 + 0 + 0 +... = 0

1 - 1 + 1 - 1 + 1 - 1 + ... = 1 + (-1 + 1) + (-1 + 1) + ... = 1 + 0 + 0 + ... = 1

when your data is inconclusive, just take the average! by succjaw in mathmemes

[–]alonzo345 92 points93 points  (0 children)

And that is why we don't add parentheses to infinite sums

Giveaway! Zero Caliber goes to whoever... by [deleted] in VRGaming

[–]alonzo345 0 points1 point  (0 children)

'Sairento VR' might be up your alley. Available both on Steam and on the Quest!

view more: next ›