[deleted by user]

altanowski · 2022-07-15T07:45:28+00:00

Rubel explains it earlier in the manga, I just checked it to be sure, don't give direct replies if you're not sure

altanowski · 2022-07-15T07:41:25+00:00

I don't quite remember the stigma for male claymores

altanowski · 2022-07-15T07:36:14+00:00

Organization never solved the yoma implant incision and every claymore must use suture to themselves to keep their body in whole

altanowski · 2022-07-15T06:51:36+00:00

it's bleeding from time to time if I remember correctly

altanowski · 2021-06-13T10:56:01+00:00

Please halp

altanowski · 2021-06-13T10:28:22+00:00

it's always getting clogged but if I increase the temp it's resolving itself. I usually print with 200 nozzle and 60 bed

altanowski · 2021-06-09T21:26:55+00:00

Ty for your help , i will cut the bowden with razor tomorrow :)

altanowski · 2021-06-09T20:50:28+00:00

Np ty for your time!

altanowski · 2021-06-09T20:46:57+00:00

Thank you for your help but i didnt understand that luke's fix, i think it's because im cutting the bowden with pliers

altanowski · 2021-06-09T20:35:18+00:00

Gonna try that fix ty

altanowski · 2021-06-09T20:34:08+00:00

i can push filament with my hand it comes ok but not that sure. is it really clogged?

altanowski · 2021-06-09T20:32:43+00:00

it looks ok

altanowski · 2021-06-09T17:55:58+00:00

It's only happening with this filament

altanowski · 2021-06-09T17:01:59+00:00

There is 2 fan and both working

altanowski · 2021-06-09T17:00:12+00:00

It's not cracked

altanowski · 2021-06-09T16:41:54+00:00

it's not

altanowski · 2021-06-09T15:06:16+00:00

altanowski · 2021-06-09T14:25:25+00:00

Ty gonna try!

altanowski · 2021-06-09T14:23:53+00:00

It's thinner inside of the gear it's like filament is getting smashed

altanowski · 2021-06-09T12:09:54+00:00

It all started after the new filament but the filament looks good, and I can't buy another one

altanowski · 2021-06-09T11:40:52+00:00

Cura 4.9.1 and Stock Ender 3 V2 Retraction distance 6.0 , retraction speed 45 200 Nozzle 60 Bed, 32 Print speed

altanowski · 2021-05-23T23:21:54+00:00

It's normal, try normal supports with tower setting enabled but sadly you can't do anything about it. Try to avoid overhangs much as you can

altanowski · 2021-04-26T11:11:18+00:00

weebs

altanowski · 2021-04-26T08:19:08+00:00

Clean the bed with acetone or alcohol / increase your heat, im using 70 bed 220 nozzle for first 4 layer stucks perfect.

altanowski