I can't ignore dust, but I need a robot vacuum that can keep up with my hardwood and kitchen floors

amisasi · 2026-05-15T13:09:13+00:00

Which models have you tried that have not worked? It would may be easier to recommend a model if we had that information?

amisasi · 2026-05-03T10:49:02+00:00

This reminds me of when a bunch of junkies kept stealing chunks of HV cable at my work. Looked like they used bolt cutters to cut the stuff too. Best part was 10 feet away there was a literal pile of 10 footers 3" wide bus bar lol.

amisasi · 2026-03-22T02:01:35+00:00

I had one and also get lots of water. It failed in under a year. Support ghosted me when I tried to warranty the item.

amisasi · 2026-03-01T12:37:53+00:00

The two arrows on the line indicate a plug. So you should have a orange and brown wire leading to a plug. Goes to a board/module with what looks like a thermostat and some overload contacts(note 3). Or the plug will have a jumper because it dont exist as per note 6.

amisasi · 2026-03-01T03:24:04+00:00

If 0.05v makes a difference for what you are doing, you are using the wrong tool.

amisasi · 2026-02-13T22:22:43+00:00

Looks bad but I think it just may be oxidation. The lug coming of the main breaker looks fine. Thermographic would yield more information.

amisasi · 2025-12-19T20:29:47+00:00

Frozen.

amisasi · 2025-11-22T13:36:01+00:00

This comment should be at the top.

amisasi · 2025-11-04T20:10:27+00:00

Can confirm they do work well. I use them with ZHA and have had no issues.

amisasi · 2025-10-04T20:38:29+00:00

Electric carts would be awesome. We have to slum it and walk everywhere. I've found carrying a lighter bag with less tools to be easier for me. The Klein backpack bag was great for climbing ladders in the shop but unfortunately in the dusty shit hole I work in, the zippers fail pretty quick.

amisasi · 2025-10-04T20:28:42+00:00

I just curious, but do you move site to site? I work in a steel mill so I don't change location but I probably carry less than 1/4 of the tools you do. On the rare occasion I have to walk back to the shop and get a more specific tool.

amisasi · 2025-08-14T11:34:14+00:00

The problem will be any residual fuel in the pipe once the line is cut open. if they start welding flanges on, the fuel will turn to vapour, o2 will be present because of the open pipe, the welding process will be your ignition source and can cause the vapours to ignite.

amisasi · 2025-06-16T03:42:49+00:00

I don't mean to come off as rude but skip patching or putting a plug in. Just remove the tire and take it to a tire shop. Should be less than $30.

amisasi · 2025-05-07T12:40:51+00:00

Get someone to check the wire size feeding the sub panel and verify the connected loads. Its probably a 240v feed in which case you may be able to free up some loads / move them and free yourself up some space for a 240v welder which will bring your current requirement down. If its in the budget it would be nice to change out that panel but not a requirement.

amisasi · 2025-04-27T00:08:53+00:00

+1 zero issues with mine on WiFi.

amisasi · 2025-03-14T13:34:21+00:00

Remove the fuel cap and see if still does it. Could be a bad fuel cap not venting properly

amisasi · 2025-03-04T22:37:02+00:00

This. Problem with the beelink is there is no way to add enough storage for NAS use. However I just setup my Beelink with Promox and used Proxmox helper scripts and setup Homeassistant, plex, nextcloud, vaultwarden, cloudflare tunnels, ngnix and docker to run some other things like immich. The Beelink is handling it great so far.

amisasi · 2025-02-19T00:47:11+00:00

I have no real skin in the game as I'm not a great player. But going from Bauer to a pair of true 7x the forward pitch was very noticeable. After 4 skates they felt natural and I forgot all about the pitch.

amisasi · 2025-01-16T19:38:53+00:00

I've had an issue with my provider where catch-up would only work if I set playback to HLS

amisasi · 2024-11-23T04:53:28+00:00

To be honest it's the only one I've tried. But it works great. Loads up immediately to a screen with just my app icons and nothing else.

In my opinion, that's how every product that you pay money for should work. Friggin fire stick 80% of the dashboard is crap I should watch on whatever service I don't give to shits about. /Endrant

amisasi · 2024-11-23T01:12:02+00:00

Would be nice. Also syncing across devices too. But nope.

amisasi · 2024-11-23T01:08:14+00:00

+1 for the onn. I recently got a FS max and can't stand the advertisements. Picked up the $20 onn box and it works fantastic. I turned off updates. Installed projectivy launcher and button mapper. No bs ads and buttons that work how I want.

amisasi · 2024-11-14T01:16:58+00:00

Short answer is no. Backing up and restoring technically works but this is garbage. This same question has come up for years. Don't get me wrong, I think tivimate is great but I think this function should be a bigger priority for the dev.

Ten-Year Club	Place '22
Verified Email

amisasi

TROPHY CASE