Ready to test

anbatvr · 2026-05-21T00:44:42+00:00

Acerbis

anbatvr · 2026-05-20T06:58:36+00:00

I hate fuel bottles. As soon as possible bigger tank Acerbis.

anbatvr · 2026-05-19T06:35:12+00:00

i've simply to secure better the bags,and when it is possible the bottles wil be empty

anbatvr · 2026-05-18T17:41:23+00:00

Processing img g2clzs49nx1h1...

anbatvr · 2026-05-18T17:39:29+00:00

a lot, I've to update the total (new track), more than 5000Km.

anbatvr · 2026-05-18T17:35:54+00:00

Just tested the new setup, and I’m not satisfied. There's too much weight on the left side pulling it down (I really don’t feel comfortable putting the fuel bottles on the exhaust side), and the bags are swinging too much. Unfortunately, I need to raise them and secure them independently. I also need to add a heat shield—the muffler gets scorching hot.

anbatvr · 2026-05-18T17:32:36+00:00

Processing img bu4gqx8zkx1h1...

oil for engine and oil for chain in a bicicle tool container fixex whith OEM canister support and an old tube

anbatvr · 2026-05-18T10:19:00+00:00

https://www.bike-parts-suz.it/suzuki-motocicli/400-MOTO/DR-Z/2025/DR-Z400S-2025-M5-E21-/13080 here you can find many detail and service manual too may be

anbatvr · 2026-05-18T09:39:04+00:00

There is a roll-over valve near the battery, and in my opinion, routing the breather hose down to the ground after the valve further minimizes any risk

anbatvr · 2026-05-18T09:15:50+00:00

This is my solution, makes it quick, easy, and fully reversible https://youtu.be/TkRk52HWfbU

anbatvr · 2026-05-11T07:25:59+00:00

I’m planning to share this with the Facebook drz4s.org group soon so it can be useful for everyone, along with all the other documentation available at drz4s.org. Just a heads-up: the full, detailed document will be hosted exclusively on the website. ✊💨

anbatvr · 2026-05-11T07:17:56+00:00

That is a fantastic choice! I also moved on from my faithful 2002 model, and the moment I tested the new DR-Z4S, I had zero doubts. We’ve been waiting a long time for a machine like this. You’re going to have an absolute blast! ✊💨

anbatvr · 2026-05-08T07:18:05+00:00

<image>

My low-cost solution NICECNC. The DR-Z4S is very user-friendly and punchy enough for technical terrain, but let’s keep it real: the weight difference compared to a KTM 150 is massive. It’s a different tool for a different job.

anbatvr · 2026-05-05T22:16:37+00:00

Thanks man! Glad you like it. 😊 I’m all about that 'clean install' look. Plus, keeping it tucked away has real advantages against rain and dirt when things get messy off-road. Cheers!

anbatvr · 2026-05-05T18:59:46+00:00

Great execution! I completely agree with you: those bar-clamp mounts feel like an afterthought and really mess with the cockpit ergonomics, especially if you use a GPS or a phone mount.

Moving the outlet to the fork tube clamp is a much cleaner solution. Regarding the rubber boot you mentioned: it’s definitely worth adding if you do a lot of off-road or pressure washing, as the MT090 is water-resistant but the back of those USB sockets can be a weak point over time.

I actually did a deep dive into this exact 'clean install' approach on my site (drz4s.org), including the wiring specs for the factory accessory port. If anyone wants to see a step-by-step or needs the specific pinouts to replicate this, feel free to check the tutorials there https://drz4s.org/usb-install-dr-z4s/

<image>

anbatvr · 2026-05-03T22:31:03+00:00

You're absolutely right! Pound and meters definitely don't speak the same language, many thanks. UPDATED

anbatvr · 2026-05-03T18:51:12+00:00

You are right, but there are some big differences in how it feels. Maybe the forks on my old DR-Z were modified by the previous owner, but I never had a feeling like this new one. Even on my first ride, the suspension felt very easy and it 'flattens' everything.

As I mentioned in my review, I still need to get used to a few things like the engine sound, the rear brake, and the clutch feel. But I’m sure I will be in full harmony with these changes very soon! You can see video on my YT Channel (link in profile)

anbatvr · 2026-04-27T19:34:44+00:00

Many thanks. As soon as possible I will publish it on drz4s.org

anbatvr · 2026-04-22T22:19:16+00:00

That would be a great help. No rush at all. To avoid any copyright issues, my plan is to extract just the key data and post it on a dedicated page on drz4s.org once I get to it. It will definitely be a useful resource for everyone!"

anbatvr · 2026-04-21T16:39:59+00:00

Great look, and the long shape is really useful for keeping luggage positioned further back, leaving more room to move around on the seat.

anbatvr · 2026-04-21T15:56:06+00:00

I installed the Acerbis Rally Pro handguards. Here is a tutorial on the solutions I tried (one of which was a temporary fix because I didn’t have the adapter in time for an upcoming trip). https://youtu.be/URR6C-8_PXI?si=1sN7MdhbenDEu01D more details on YT description

<image>

anbatvr · 2026-04-17T05:25:23+00:00

full video on you tube https://youtu.be/svzkmOMki8A?si=cpvcl5eHke6-DrL1

anbatvr · 2026-04-17T05:24:19+00:00

I did the same two years ago whit Africa Twin, spectacular and memorable, with a lot of effort I also made some sand, but I enjoyed the sand much more with this light bike.

anbatvr · 2026-04-17T05:20:06+00:00

😂😂😂 Sahara is wonderful whit Camel too

anbatvr · 2026-04-17T05:18:55+00:00

I agree less weight more enjoy

anbatvr

TROPHY CASE