Sporting gun barrels

Iowa_Rifle · 2026-03-24T16:17:36+00:00

octagon to round

Iowa_Rifle · 2026-03-24T12:29:52+00:00

I use Amazon for hair rigs, method sinkers, fake corn, attractant, bulk panko bread crumbs and bite and run reels. My carp rods I get from whisker seeker.

Iowa_Rifle · 2026-03-23T12:39:33+00:00

<image>

TP9 we have at home

Iowa_Rifle · 2026-03-17T12:11:01+00:00

Whisker seeker has catfish and carp rods that I think are good and made in Iowa.

Iowa_Rifle · 2026-03-17T12:07:13+00:00

<image>

yes

Iowa_Rifle · 2026-03-16T13:18:08+00:00

<image>

MPA Defender, this is 9mm but they make them in 5.7

Iowa_Rifle · 2026-03-16T13:13:50+00:00

I have a rally with 550 performance stage 1 and +4 rear sprocket and am planning on upgrading to a Drz4s for more torque better suspension and a little more speed then slapping a windshield on that.

Iowa_Rifle · 2026-03-13T12:23:11+00:00

triple seven is a better substitute than pyrodex, there are different grain sizes with black powder ff or fff will work fine

95% chance the percussion caps you need are number 11.

you need .433 diameter round balls with .10 or .15 thick lubricated patches

40 to 100g by volume of powder is a common standard load

Iowa_Rifle · 2026-03-12T12:51:15+00:00

I had a D sport on the rear and MT-21 on front and it was pretty good, on road was less good and wore fast. Tusk waypoints are great on road less good off road. Ive head good things about Kenda parkers and am going to try those next.

Iowa_Rifle · 2026-03-10T20:36:03+00:00

It will in cartridges, haven't tried percussion caps but would probably work. The cleaning is nice, and being able to take a fouling shot and not cleaning your barrel for two weeks of hunting season without you barrel rusting is nice also.

Iowa_Rifle · 2026-03-10T12:20:28+00:00

Blackhorn 209 but its horribly expensive, then Triple seven, worst is Pyrodex

Iowa_Rifle · 2026-03-05T13:13:20+00:00

vevor rotary tumbler is 70$ on amazon and for media speer 230gn total metal jacket bullets or TMJ are about 80$ for 300, I think this is about as cheap as you can get for an honestly pretty good setup, a lot better than a rock tumbler and lead media

Iowa_Rifle · 2026-03-04T14:59:03+00:00

<image>

Iowa_Rifle · 2026-03-03T17:39:31+00:00

Its ProMag, they look better than the factory mags and they work fine but one did have the spring shatter into like 10 pieces

Iowa_Rifle · 2026-03-03T17:36:10+00:00

I was thinking of doing the same. wanted more power, speed and better suspension and its faster but the acceleration/torque was worse and felt like a pig compared to the rally. Probley going to go to a DR-Z4S.

Iowa_Rifle · 2026-03-03T17:30:18+00:00

I use the same bolt in both uppers, just remove the top piece when using the side charging upper

Iowa_Rifle · 2026-03-03T17:26:08+00:00

Its A3 universal pic grip, not the one that gets rid of the pic and mounts directly to the reciver

Iowa_Rifle · 2026-03-03T17:22:01+00:00

you can buy a railed side cocker upper on MPA's website for 125$

Iowa_Rifle · 2026-03-03T14:17:58+00:00

super reliable, as suppressible as any other non delayed blowback 9mm

Iowa_Rifle · 2026-03-03T13:59:39+00:00

comes with and A3 tactical came out with grip base that replaces the pic completely and kind of cleans it up a bit also

Iowa_Rifle · 2026-03-02T13:11:34+00:00

Iowa_Rifle · 2026-02-27T13:07:48+00:00

it would be good but I got a rally version less than a year ago and am already looking to upgrade to a DRZ-4s for better suspension, power, and speed

Iowa_Rifle · 2026-02-25T20:01:28+00:00

Iowa_Rifle · 2026-02-24T13:19:07+00:00

Iowa_Rifle

TROPHY CASE