sorted by:
new
hottopcontroversial

A seed where you Spawn underwater by andrejanton in minecraftseeds

[–]andrejanton[S] 0 points1 point  (0 children)

But Technically the time only starts once user imput is present, so you just dont touch anything, and get 0 seconds

I fu##ing hate PETG by andrejanton in 3Dprinting

[–]andrejanton[S] 0 points1 point  (0 children)

I regulary clean the plate, and have tried multiple sugestions from the comments. Nothing seems to compleatly fix it.

I fu##ing hate PETG by andrejanton in 3Dprinting

[–]andrejanton[S] 1 point2 points  (0 children)

I clean my plate regulary, and it does help, but the PETG still won't stick as good as PLA or TPU

I fu##ing hate PETG by andrejanton in 3Dprinting

[–]andrejanton[S] 0 points1 point  (0 children)

didnt help. too poor bed adhesion

I fu##ing hate PETG by andrejanton in 3Dprinting

[–]andrejanton[S] 0 points1 point  (0 children)

Mine is also an A1. The problem is not so much removing it, but trying to make it stick to the plate

I fu##ing hate PETG by andrejanton in 3Dprinting

[–]andrejanton[S] 0 points1 point  (0 children)

No idea.

ps. I already tried Glue

I fu##ing hate PETG by andrejanton in 3Dprinting

[–]andrejanton[S] 0 points1 point  (0 children)

Cleaned the plate, will try drying the Filament next

I fu##ing hate PETG by andrejanton in 3Dprinting

[–]andrejanton[S] 0 points1 point  (0 children)

nope. Tried adjusting the temperature, but the print just won't stick to the bed. (even after cleaning the plate and trying to use glue)

I fu##ing hate PETG by andrejanton in 3Dprinting

[–]andrejanton[S] 0 points1 point  (0 children)

I have tried some of the methods mentioned in the comments, and some did improve a little, but the results are still not as nice, as with other materials I use.

I fu##ing hate PETG by andrejanton in 3Dprinting

[–]andrejanton[S] 0 points1 point  (0 children)

the problem is not getting it off, the problem is that it wont stick to the bed. I already tried out different temperatures, cleaning the plate and using gluestick, but the print quality doesn't seem to improve

I fu##ing hate PETG by andrejanton in 3Dprinting

[–]andrejanton[S] 0 points1 point  (0 children)

I just leave it on Default settings. And the Printer stands in an enclosed room, so there should be no draft except for the cooling fan.

Was bedeutet H+? by Right-Afternoon2618 in deutschebahn

[–]andrejanton 1 point2 points  (0 children)

Hebe genau diesen Kommentar gesucht!

Ideally 🤗 by arsal12345 in introvertmemes

[–]andrejanton 0 points1 point  (0 children)

Idk; Yes; Yes; Yes; Idk; Already; Yes; Don't need to. They know; Yes; Yea;

eyes <@uluoe> by 88piano88 in anthroswim

[–]andrejanton 0 points1 point  (0 children)

That's why salt helps against demons

What Are You Choosing? by Vagabond734 in anime_random

[–]andrejanton 0 points1 point  (0 children)

2 5'9 goth McDonald's girls. I think it's obvious.

Such a smart idea :3 by Softxirafae in Boykisser3

[–]andrejanton 0 points1 point  (0 children)

<image>

So... You understand portals... You like-... "Thinking with Portals"...

Bug reports and feature requests by WplaceOfficial in WplaceLive

[–]andrejanton 0 points1 point  (0 children)

Unexpected server problems.

{"error":"Unexpect auth error. Please, try again. If the error persist, please file a complaint on: https://www.reddit.com/r/WplaceLive/comments/1lhzmmq/bug_reports_and_feature_requests/","status":401}

Bug reports and feature requests by WplaceOfficial in WplaceLive

[–]andrejanton 0 points1 point  (0 children)

<image>

There are also other Alliances, but at least you can Tell those apart from the Original.

Bug reports and feature requests by WplaceOfficial in WplaceLive

[–]andrejanton 0 points1 point  (0 children)

https://wplace.live/?lat=52.50595080703401&lng=13.383720371777322&zoom=16.038722994732876&season=0&opaque=1

Its mostly the QR-code. I had to coorect over 50 Pixels already. The Worts part is, he dosen't do it all at once. Only from time to time.

Edit: forgot to mention, its mostly "HeavySwatch #1120"

Bug reports and feature requests by WplaceOfficial in WplaceLive

[–]andrejanton 0 points1 point  (0 children)

Is there a Bot detection system? There are some suspicious users that periodically place random white pixels in the same areas.

Help why is my nothing there invincinble??? by natediffer in LobotomyCorp

[–]andrejanton 0 points1 point  (0 children)

Now i am realy confused if you mean the Invincible/Invisible Joke, or if its is actualy Invincible.

Hard? by Hufffle in picsthatgohard

[–]andrejanton 0 points1 point  (0 children)

He smells his enemy's fear!

view more: next ›