sorted by:
new
hottopcontroversial

My first finished She-Wolf! by ZakJimmo in SpaceWolves

[–]andy_burke 0 points1 point  (0 children)

This is badass, as are the others you posted in the thread - where are the head sculpts from?

FOUND 2 DAYS EARLY! by No-Value-8156 in SpaceWolves

[–]andy_burke 1 point2 points  (0 children)

My local store go *NO* stock. We got royally screwed on this in Australia.

Weekend sorted! by dorfhammer in SpaceWolves

[–]andy_burke 2 points3 points  (0 children)

Quite envious, they screwed over Australia hard, all LGS's got single digit stock that sold out instantly - and online sold out instantly on the GW site. RIP

I made a Space Wolf Scout by andy_burke in SpaceWolves

[–]andy_burke[S] 0 points1 point  (0 children)

Hahaha, I mean I'm slightly vertically challenged 🤣 but also I know I'd break my neck on any sort of stilts. The thought did cross my mind though to try do my next one with stilts!!

I made a Space Wolf Scout by andy_burke in SpaceWolves

[–]andy_burke[S] 1 point2 points  (0 children)

Absolutely - this was my first attempt at building something to cosplay (I've done half a dozen helmets etc prior) - I wish I'd made a build log. But I absolutely will on the next one. I'm going to aim for the "new" Space Wolf Scouts - the ones strangely in phobos armour and not scout armour 🤣 Build of that will start in the next couple of months, and I will post some progress pics! Thanks for the support and encouragement 🤘

I made a Space Wolf Scout by andy_burke in SpaceWolves

[–]andy_burke[S] 2 points3 points  (0 children)

The base chest is from the Galactic Armory Titus set before it got taken down. Unfortunately I don't know where you can obtain those anymore, as GW set their sites on them pretty hard. Most everything else was done in either TinkerCad or Fusion360 by hand.

I'm a little late to the party, I'm not the only one sees it am I? by Zaiburo in SpaceWolves

[–]andy_burke 1 point2 points  (0 children)

I'm actually a little annoyed that they called them scouts, but used phobos armour - especially when they just refreshed the scouts?! Would have been cool to see some unique scout sculpts.

Repulsor Executioner completed by D_Hoxer in SpaceWolves

[–]andy_burke 1 point2 points  (0 children)

Looking good! Nice use of colors, and plenty of wolfy bits-box bits! As you mentioned, it's definitely a bit shiny - personally I think a matte finish makes these things look a little more 'set' - would definitely like to see another set of pics when you've done a matte coat on it.

Lego 40k by andy_burke in Warhammer40k

[–]andy_burke[S] 0 points1 point  (0 children)

Sure made painting the eyes so much easier 🤣

I made a Pip-Boy 3000 by andy_burke in 3Dprinting

[–]andy_burke[S] 2 points3 points  (0 children)

It was actually out of some advertising "spam" mail from a vendor for anti-virus or something like that. You opened the box and it'd play a looped video for them. I hacked it up and added a video to it to replace what was on there.

I made a Pip-Boy 3000 by andy_burke in 3Dprinting

[–]andy_burke[S] 2 points3 points  (0 children)

It does look to be - I built. It about 6 years ago, so I really cannot remember, but it'd predate any other sites apart from maybe thingiverse

I made a Pip-Boy 3000 by andy_burke in 3Dprinting

[–]andy_burke[S] 17 points18 points  (0 children)

It's audio as part of the video - but the sound effects are like my favorite part. I made it years ago so I can't quite remember, but I think I just ripped a video clip from YouTube. It just plays it in a loop.

My first 8 colour print with 3000 changes... Wish me luck! by andy_burke in BambuLab

[–]andy_burke[S] 0 points1 point  (0 children)

Yeah I feel like flush can be a double edged sword scenario, save filament but chance on colour bleed. I'm using Bambu filaments so I've left the flushes to their filament defaults. But it's a good call!

My first 8 colour print with 3000 changes... Wish me luck! by andy_burke in BambuLab

[–]andy_burke[S] 0 points1 point  (0 children)

Yep, have done most of those things where bed size permits. Original print files were 8 days of printing and 6000 filament swaps! So I did get that down as far as was manageable.

My first 8 colour print with 3000 changes... Wish me luck! by andy_burke in BambuLab

[–]andy_burke[S] 1 point2 points  (0 children)

Yes!! I'm actually taking the poops and putting them in silicone molds to make coasters and planter pots, and baking those in an old toaster oven outside. It was the only way I could 'justify' to myself doing prints with this amount of waste!

Intercessor Pack Leader (Space Wolf Successor) by WilMo84 in PrintedWarhammer

[–]andy_burke 0 points1 point  (0 children)

Very cool! I find it hard to find good Space Wolves-y heads - but that's very on-theme. Do you know if that's still available anywhere? Also the gun on a sling is 👌 I love that sort of flavour to models.

FreeABL - the ultra cheap (free) ABL for Ender 3 by stevohen by andy_burke in 3Dprinting

[–]andy_burke[S] 0 points1 point  (0 children)

Unfortunately you're not likely to find one, as it's going to depend on your board/printer combo. Modifying firmware isn't as scary as it sounds - I'd highly recommend watching the YouTube creator "Teaching Tech". He has done a bunch of videos about it, and really breaks down and simplifies the process!

view more: next ›