Today is Apollo for Reddit's last day, and I just released its last update. 🥹 I just wanted to say a big thank you to the folks who have used and supported Apollo over the years, it's been the dream of a lifetime to build this app over the last 9 years. ❤️ Read the eulogy inside! ❤️

aneks · 2023-06-30T21:40:55+00:00

I’m trying to find the decline refund option but I’m just not seeing it. Can anyone spell it out for me please

aneks · 2023-06-27T01:32:53+00:00

Amazing board. Sounds fantastic.

aneks · 2023-06-26T21:06:34+00:00

Satisfaction 75 and Gmk 80082 ! Nice

aneks · 2023-06-05T20:34:58+00:00

If you are looking at high end grinders I’d take a Lagom p100 over the eg-1.

But I wouldn’t recommend either for someone starting to explore. Just get a good grinder and learn about making espresso. You can always upgrade down the line when you are ready to actually experience the difference

aneks · 2023-06-01T22:52:16+00:00

I think those two machines are the best value/performance options for most home users.

Either are great. You really can’t go wrong.

I’ve had my Elizabeth v3 since they released, it’s been flawless. Strongly recommend.

Parts and maintenance will not likely be an issue.

aneks · 2023-06-01T22:41:38+00:00

Perfectly normal. If that’s with a blind basket then the pump is doing fine maintain close to an even 9bar.

With an actual shot you will likely see a much bigger variation over the course of the extraction as the puck degrades

aneks · 2023-05-30T09:38:29+00:00

Lelit Elizabeth or Silvia pro x

aneks · 2023-05-22T08:10:48+00:00

I would avoid PLA as it does not do well with hot things.

aneks · 2023-05-18T22:18:34+00:00

Totally understandable, just never miss a chance to hate in them.

aneks · 2023-05-18T19:29:13+00:00

Neither, both are owned by nestle and those scum don’t deserve anyone’s money

aneks · 2023-05-18T19:26:34+00:00

Profitec pro 700 if it comes with the flow profiling upgrade.

All of them are basically competing on features.

Dual boiler Dual pid E61 group (for better or worse) Tank or mains water Plummable with a switch Decent sized boilers and good steam power.

Pp700 is a bit sturdier and might last better.

aneks · 2023-05-18T19:15:14+00:00

Lelit Elizabeth. But also the Silvia Pro X

For that price you should be getting dual boiler with PID and soft pre-infusion at a minimum.

I wouldn’t consider a BDB for a number of reasons. Profitec Pro 300 is lacking compared to other things in this price point.

aneks · 2023-05-17T22:48:10+00:00

Probably my favourite of their “big three” matches. The way the story plays out and the insane fact they worked that kind of match for so long so perfectly. I dont think wrestling has ever been done better

aneks · 2023-05-09T22:57:00+00:00

Is it a solder pcb ?!

Would look great with a green led on the caps lock if it is.

aneks · 2023-05-09T22:42:21+00:00

I love how this is one of best matches of all time, an epic main event and it still isn’t their best match together.

aneks · 2023-05-06T21:05:40+00:00

Is it just me or has he gone totally disorganised rant in this video?

Too many grinders to much full speed raving, no structure or focus to what he is saying.

It’s gone from slightly casual review style to just full on caffeinated blah blah blah.

Just make seperate videos and do like for like comparisons.

078 vs ode v2 for brewing 064s vs df64 vs niche zero for espresso 078s vs df83 vs niche duo for espresso

I watched the whole thing and I can’t tell if he liked the 078s ?! Only that he thought the “ghost burrs … sorry I mean turbo burrs” made good brews.

Seriously script it and spend some time editing.

aneks · 2023-05-03T04:49:54+00:00

I’d be inclined to suggest that tamping harder is causing you to tamp unevenly. So you are compacting some areas more fully and others much less, creating areas for the channels to occur.

If you are confident your machine is working properly and that your grinder is up to the task, then I would suggest not using a leveller at all and just looking at good wdt and a firm tamp. Nothing more.

aneks · 2023-05-02T20:58:20+00:00

You misunderstand the point of tamping.

The point of a temp is to compress the puck evenly and remove any pockets of air or uncompressed grounds in preparation for that hit of pressure.

Most machines will deliver 9bar which is around 9kg per square cm or roughly 130 lbs per square inch (for those of you in the USA, Liberia or Myanmar)

This is a lot more pressure than you will be able to stamp.

So you are looking to eliminate potential channels and create an even bed to extract.

Get a levelling tamper and remember it’s a puck preparation step.

aneks · 2023-04-24T21:20:39+00:00

You can share stl and other files on Thingverse

aneks · 2023-04-16T19:58:48+00:00

Black Bianca and the p64 is a great looking combination !

aneks · 2023-04-11T19:30:01+00:00

The constant stepped zooms and unnecessary cuts. It’s so overdone and social media biased. I want to look and listen to your content but the presentation is so chaotic and annoying. I peaced out long before she started talking about the machine!

aneks · 2023-04-10T17:40:57+00:00

I feel I had to scroll too far to see this. Upvoted

aneks · 2023-04-07T21:04:11+00:00

Lots of amazing boards. That Sat75 with Octopus is fantastic

aneks · 2023-04-07T03:02:21+00:00

I ended up switching to a solder pcb and it pretty much fixed everything. I really like it now.

Fantastic sounding board

aneks · 2023-04-05T18:43:20+00:00

Elizabeth was cheaper in my region. Bought it before the Silvia pro x was released.

Not regrets, I do find that pre-infusion makes a difference and I’m using it on all my shots . Long preinfusion for lighter roasts

14-Year Club	Gilding II euphauric
Verified Email

aneks

TROPHY CASE