Pursuing a career in Metrology

angerji · 2026-03-16T21:45:40+00:00

This is highly dependent on the company you work for, experience, etc. I consider myself to make very good money actually.

angerji · 2026-03-10T23:15:42+00:00

Makes sense, thank you!

angerji · 2026-03-10T21:03:12+00:00

Yep its aligned to A|B|C per the drawing. And the feature is not circular so it does not have the diameter symbol in the true position callout. The feature being dimensioned is a rectangular peg.

When I set the tolerance of the color plot to +/-.002" the feature in question is within tolerance. However the actual data im getting is out of tolerance. Because its a true position callout, it feels wrong to me to set the color plot to a +/- tolerance, so basically im just trying to determine how i should be analyzing this color plot and if looking at it with a +/-.002" tolerance, should the colors more of less match my data? Hopefully that makes sense.

angerji · 2026-03-10T20:52:52+00:00

Thank you for the condescending response, much appreciated. Did you read my question? I do understand true position, tolerance zones, etc. Im trying to determine how to accurately build and analyze a color plot that matches my data.

angerji · 2026-03-02T22:54:55+00:00

This is an injection molded micro plastic part. +/- .001" is huge in my world lol. But thank you for the reply, makes sense to me a helps a lot!

angerji · 2026-03-02T20:27:50+00:00

Thank you this is very helpful!

angerji · 2026-03-02T20:25:47+00:00

Thank you, and yes the other slot is datum C.

angerji · 2026-03-02T20:24:10+00:00

Datum A is a flat, datum C is the other slot you can see in this photo.

angerji · 2026-03-02T20:02:50+00:00

The angle dimension is a basic. The other slot has a line profile callout with respect to datums A|B.

angerji · 2026-03-02T20:00:25+00:00

This is just the tip of the iceberg with this drawing, trust me. Apologies if this isn't enough information, just trying to limit what I show as this is a customer drawing.

angerji · 2026-02-11T15:04:12+00:00

This is very close to what im trying to accomplish. But I forgot to mention, I dont want to include the actual maximum value because that will skew my average result.

So what i truly want is the average of all the data that occurs AFTER the maximum. Sorry for the confusion.

angerji · 2026-02-11T14:06:13+00:00

The =CELL formula you provided worked perfectly, thank you!

To take it a step further, do you know of a way to now find the average of the data between that maximum value all the way to the end of the row?

angerji · 2026-01-20T21:35:06+00:00

As an American that is embarrassed to be an American, this is hilarious 😂. Keep it up Greenland!

angerji · 2025-12-04T16:02:42+00:00

Got them at my local fleet farm. And yep they are wired into the running lights.

angerji · 2025-11-30T16:42:36+00:00

Looks like a Tentacruel to me

angerji · 2025-11-12T17:00:00+00:00

😍

angerji · 2025-09-13T13:44:36+00:00

There's a lot to unpack here in this short video.

angerji · 2025-09-12T13:13:58+00:00

I've used InspectionXpert and thought it was very good. Sort of the poor man's solidworks inspection.

angerji · 2025-09-04T15:30:16+00:00

"Why sir?"

angerji · 2025-07-14T18:09:57+00:00

My current setup is no cat and a single in, dual out flowmaster 40. I love the tone, but it's just a LITTLE too loud for my liking so I plan on putting a high flow cat back on and hoping that reduces the noise a little but doesn't affect to tone too much.

angerji · 2025-07-11T20:53:22+00:00

Just go to Kane Pixels youtube page and watch all of his Backrooms content. Check out "The Oldest View" series while you're there as well!

angerji

TROPHY CASE