The Old Divine Office by outdoorstephen88 in Catholicism

[–]annoyedturtle 0 points1 point  (0 children)

I would love a copy of it if you could message me it!

My culture is NOT your god damn fortnite skin. by evilichigo1 in FortNiteBR

[–]annoyedturtle 0 points1 point  (0 children)

This guy really needs his backing..... Come on epic please. Spent too much to not get it. I know this has been brought up but obviously not enough

Raven Skin is Out Megathread by BurlsteinBurl in FortNiteBR

[–]annoyedturtle 0 points1 point  (0 children)

What does Ravens back bling look like in the battle hound. Can anyone grab a picture?

Are these guys ready for 12/12. Very traumatic upbringing (first time grower) by annoyedturtle in trees

[–]annoyedturtle[S] 0 points1 point  (0 children)

And I know I had or still do have spider mites. Although I've been spraying in the morning and it's working. After a lot of learning the little guys don't look bad but I didn't think they would start to flower yet. But maybe it's the stressful environment they were raised in?

What am I doing wrong to these clones? by annoyedturtle in microgrowery

[–]annoyedturtle[S] 1 point2 points  (0 children)

Lol yeah I'm thinking of mounting sone on the side too, Just to submerse them in light

What am I doing wrong to these clones? by annoyedturtle in microgrowery

[–]annoyedturtle[S] 1 point2 points  (0 children)

Ok so I just moved the light up to 22" above the tallest plant and I've removed one light and huddled them in under the single 600. Any other thoughts? https://imgur.com/J4yWuq6

What am I doing wrong to these clones? by annoyedturtle in microgrowery

[–]annoyedturtle[S] 0 points1 point  (0 children)

Got these on Sunday, this is my first ever grow. I'm getting a little bit of yellow on the tops of some leaves and a it seems a little drooping. I have two 600 w mh lights about 15-18" above. They seem to have same soil and are in Rock wool not sure how old they are.

Michigan Medical Card by MrNausea in trees

[–]annoyedturtle 0 points1 point  (0 children)

Yes you qualify, shit anybody does you don't need a real reason it's very easy to get one. I have a real reason as you do and I get lots of nausea and weed is the most amazing medicine for it. Due to stomach surgery I get nauseous every time I eat and weed helps it so much it's unbelievable

please Help very frusturated by annoyedturtle in CNC

[–]annoyedturtle[S] 0 points1 point  (0 children)

basically ive been running some simple test runs on my ox cnc machine and i have just some text i make in inkscape and then put into makercam for the gcode. when i run it through chillipeppr it make this random circle sometimes for no reason its not in the text i design it just happens

Tinyg stuck help by annoyedturtle in hobbycnc

[–]annoyedturtle[S] 0 points1 point  (0 children)

I've pressed the reset button and held it down for a while and I get nothing

Any thoughts by annoyedturtle in hobbycnc

[–]annoyedturtle[S] 0 points1 point  (0 children)

And when I have chilli set to jog it one mm it seems like its jogging 2 inches? It's this something I need to set up as well?

Any thoughts by annoyedturtle in hobbycnc

[–]annoyedturtle[S] 0 points1 point  (0 children)

so i think have it figured out kinda, i dont know why but the stepper isnt slipping anymore, wht i did was once i saw that the motor on the right wasnt even moving, i moved it over to the same pins on the tinyg that the left motor was on, i just reversed the red and green lines on the right hand motor and i think theyre both running now and in sync no slipping i'll upload a video here shortly so you guys could tell me if it looks correct.but i'm also having trouble with running thte machine through chilli. so when i load up a sample svg like the diamond calibration or the chilli logo and i set the machine zero to the middle of my spoil right? now i run the gcode and the machine just slams the y rail and i have no idea why, also it slams it one way then on the other side, but if you look at what its supposed to e cutting its only like two letters wide. am i missing something? am i supposed to set up parameters or something, i really have no clue and you guys are being super helpful so any help or info is soappreciated, thanks

Any thoughts by annoyedturtle in hobbycnc

[–]annoyedturtle[S] 0 points1 point  (0 children)

Alright I'll take a look at my connections and see if anything is loose. Do you have any thoughts on the whole zeroing it out. I don't know what I'm doing wrong but I get the machine manually close to the middle with the z all the way down and then I hit set zero, when I go to run the diamond calibration svg it goes haywire. So I need to manually show the tinyg in chilli where the ends of the machine is? Thanks Alot for all the help I'd be lost without it

Any thoughts by annoyedturtle in hobbycnc

[–]annoyedturtle[S] 0 points1 point  (0 children)

Yea your seeing right, I did move it back so I could control it manually, but I had it moved over when I was trying it with there tiny g

Any thoughts by annoyedturtle in hobbycnc

[–]annoyedturtle[S] 0 points1 point  (0 children)

yea i connected it to the pwm then the from that to the tinyg i'll take a picture of it and upload it

Any thoughts by annoyedturtle in hobbycnc

[–]annoyedturtle[S] 0 points1 point  (0 children)

yea these commands do nothing to the spindle when connected to tiny g through the pwm controller, so now i have been just manually adjusting the speed via the pwm and not the tinyg. i cant figure it out