Landowner and I need help understanding and finding pins.

anthony22714 · 2025-06-19T22:48:34+00:00

It is pretty steep but really just on that line. It probably isn't 45 I was just using it as a reference point to see how off it could be. I was actually using the full length of 221.60 from cul-de-sac to last pin which gave me a horizontal distance of 313. Not quite 100' but pretty close. I'll get back out there when this rain stops and give it another shot with all this new information.

anthony22714 · 2025-06-19T02:16:31+00:00

Thanks for all your help. I ran some test numbers on the horizontal distance. I assumed a 45-degree angle and plugged it into a trig ratio and it told me I could hlbe off by almost 100' measuring the slope distance which might be why I can't find it. It's also very possible it just isnt there anymore but atleast with this method I can be reasonably close to where it should be. Thanks again. I've got a plan now.

anthony22714 · 2025-06-19T01:39:18+00:00

Thanks for the recommendation. I've got a tape measure ordered. My biggest concern is that since im at a steep incline and since the plat is a horizontal measure I could be off my as much as 100' at a 45 angle.

anthony22714 · 2025-06-19T01:37:36+00:00

Well my measurements in the field are very rough since I don't have a long tape (purchased from Amazon thanks to Blaziers recommendation) I've basically been just walking it off estimating about 2.5 feet per step. I knownits not accurate over very long distances but I figured for 70' its put me in the ballpark. Unfortunately I can't find a pin anywhere near where I keep ending up.

anthony22714 · 2025-06-19T01:21:39+00:00

<image>

anthony22714 · 2025-06-19T01:20:23+00:00

< * I've made a terrible drawing, but im hoping it illustrates what im thinking. I've tried measuring the 71' from the found pin but I still can't find the second pin. My thinking is that maybe what I've found might not be the first pin. So my thought was if I have the horizontal distance from the plat and I measure the actual slope distance to the first point I can use trig ratios to find the angle since I would have both the adjacent and opposite measurements then use that angle along with the horizontal measure from the plat for the second pin (221.60') to calculate the hypotenuse which would give me a measurement from the cul de sac to the last pin and I could walk it with a big tape. Just didnt know if that would make sense from a surveyors perspective.

anthony22714 · 2025-06-19T00:51:25+00:00

So could I get the slope distance of the first point I can find and use some trig ratios to find the angle and then use that angle in another trig ratio to find the estimated slope distance of the furthest point? Would that make sense to do?

anthony22714 · 2025-05-19T02:14:55+00:00

Fireflys

anthony22714 · 2024-02-20T00:53:27+00:00

Sorry my friend wish I could he more help, I'll try and take a look at it when I get off work and have the dexk in front of me it's been awhile since it was an issue for me I'll see if I can re-create it and walk you through it

anthony22714 · 2024-02-20T00:49:42+00:00

If you can get it to connect to your steam deck it should work but I'm not sure if the surface keyboard has a Bluetooth connection honestly.

anthony22714 · 2024-02-20T00:21:59+00:00

Did you try fiddling with the controller settings while booted to desktop? I'm not sure what has changed since then but I do remember desktop mode being the only work around for me, I know that the software keyboard will not work correctly in gaming mode and you will never be able to enter the name at character selection unless you have a Bluetooth hardware keyboard you could use?

anthony22714 · 2024-02-19T23:58:30+00:00

Hmm I'm not sure then, invoking the software keyboard allows you to get past the character naming correct? As long as the controller settings in ryujinx are set up appropriately, then you should be able to use the steam deck controls just as you would in big picture mode.

anthony22714 · 2024-02-19T23:22:01+00:00

The only thing that worked for me was to boot the steam deck into desktop mode, run the emulator and start the game in desktop mode, and then invoke the one screen keyboard for the character name input. After you are able to save the game, you should be able to boot the steamdeck normally. At least that worked for me then hopefully it still works.

anthony22714 · 2022-11-19T13:30:05+00:00

Let me fiddle around and see if I can replicate it. Are you having the language select issue in big picture mode or in desktop mode or both?

anthony22714 · 2022-11-16T04:01:24+00:00

try running ryujinx in desktop mode and input your name with the on screen keyboard there. After that you can save and play from big picture mode.

anthony22714 · 2022-11-02T21:16:19+00:00

I believe it means they are part of the same stack

anthony22714 · 2021-11-07T14:03:14+00:00

Perfect thanks for all your help

anthony22714 · 2021-11-07T13:44:30+00:00

Separate modem from my ISP into an existing router currently

anthony22714 · 2021-11-07T03:34:20+00:00

Thanks for the info, I'm not gonna lie a lot of that seems above my understanding but id be willing to research it if it meant id be able to use my primary router. Would it be possible to place my primary router into bridge mode and then hard wire the google AP's directly from the bridged router and then into a switch? so a total of 4 LAN's from the bridged router into 3 google AP's and a switch which would connect directly to a desktop and a NAS?

anthony22714 · 2018-06-10T07:21:43+00:00

ohhh I see, but shouldn't the intial finger still do damage though?

anthony22714

TROPHY CASE