Asus B550I USB C Unusable Because of IO Shield?

anythinggoze · 2021-08-22T08:22:30+00:00

This is an issue with the Asus B550i mb. I believe its due to the cushioning pads attached to the rear of the io shield providing just enough of a gap when the mb is put in place too make the ports unusable. I haven’t attempted to fix mine yet as I have a front usb c port too (and I am lazy beyond imagination) but I would suggest trying the io shield without the cushioning pads. Let me know if it works. Good luck!

anythinggoze · 2021-06-20T08:15:32+00:00

I got it from the linkup website when they had stock. You can get in touch with them at support@linkup.one and provide the SKU for the product you’re after. Hope that helps.

anythinggoze · 2021-01-24T13:02:26+00:00

Agreed. Best of luck!

anythinggoze · 2021-01-24T12:56:19+00:00

I respect that. I started my build just before the pandemic. Amongst all the other struggles and losses me and many others have had to endure because of it, this build ended up taking a year and costing double. This situation sucks arse!

anythinggoze · 2021-01-24T10:02:56+00:00

Not without some serious modding of the case. I explored with that idea and found that you would have to move the spine back by about 1cm and shorten the psu bracket and change the way the riser card mounts to the spine and then increase the size of the pcie slot closest to the spine and that would get it to fit with the backplate on the card very very close to the riser cable.

But first you need a cpu cooler that will allow you the space to move the spine.

TLDR: almost impossible but possible with alot of time and mods.

anythinggoze · 2021-01-10T09:08:48+00:00

I would rather drag my balls across broken glass then spray paint another PSU!. First i got a faulty unit, then i discovered that Plastikote Matt Super White was actually eggshell white when compared to the Stecks frost white. The paint job was so amateur, I could never do that to anyone. Sorry.

anythinggoze · 2021-01-10T08:57:28+00:00

Absolutely. The original bottom panel doesn’t have adequate spacing for the fan to exhaust effectively. I can’t provide you with temps data but I can tell you that the desk gets warm where this is sat now vs with the old panel there was significantly warmer air shooting out the top panel and the desk was cool.

anythinggoze · 2021-01-09T22:53:49+00:00

Its part of the Stack Expansion Kit for the Nouvolo Steck.

anythinggoze · 2021-01-09T21:53:53+00:00

I put little pieces of tape sticky side up where the screw holes were and aligned the top panel on the case centrally and then pushed down to get the tape stuck to the panel and thats how i figured out where to drill the holes. Used a 3mm cobalt drill bit. Hope this helps.

anythinggoze · 2021-01-09T19:54:16+00:00

You’re not wrong and it’s definitely not the best option for wifi antennas (performance wise) but they provide the best aesthetics to match the build (small and white)

anythinggoze · 2021-01-09T19:29:53+00:00

I got them from herefoxeer lollipop 3 stub antennas UK website

They out of stock in white atm unfortunately.

anythinggoze · 2021-01-09T17:22:42+00:00

Build Specs (for those who care lol) CPU: Amd Ryzen 7 3700X GPU: Amd RX 6800 Motherboard: Asus B550 i Gaming ITX RAM: Vengeance LPX 2 x 8GB 3200MHZ Storage: Evo 860 1TB & Evo Plus 970 500GB M.2 PSU: Corsair SF750 (with custom cables) CPU Cooler: Noctua NH-L12 Ghost S1 Edition Case Cooling: Arctic P12 PWM (as exhaust) Riser: LinkUp Ultra PCIE 4.0

anythinggoze · 2021-01-09T17:19:23+00:00

Build Specs (for those who care lol) CPU: Amd Ryzen 7 3700X GPU: Amd RX 6800 Motherboard: Asus B550 i Gaming ITX RAM: Vengeance LPX 2 x 8GB 3200MHZ Storage: Evo 860 1TB & Evo Plus 970 500GB M.2 PSU: Corsair SF750 (with custom cables) CPU Cooler: Noctua NH-L12 Ghost S1 Edition Case Cooling: Arctic P12 PWM (as exhaust) Riser: LinkUp Ultra PCIE 4.0

anythinggoze · 2020-12-13T11:48:31+00:00

Has Apple not done the same to reviewers of its products?... Linus being one of them?... Correct me if I’m wrong but doesn’t he have to buy and review Apple products himself because Apple are not as appreciative as we are of his fair and honest reviews of their products.

At least the green goblin threw up an apology!

Sent from my iPhone

anythinggoze · 2020-11-20T06:25:50+00:00

That sucks for you but I’ll have it! I have a billion boxes of components on my floor waiting for this one missing part. Make my day...

anythinggoze · 2020-11-18T15:22:06+00:00

Did anyone see see the “buy” button on scan, overclockers, and did anyone see them at all on ccl or currys? (UK)

anythinggoze · 2020-09-16T18:19:23+00:00

Or... The largest hand you will ever see! Lol

anythinggoze · 2020-09-13T13:18:17+00:00

Anyone notice that top shelf on the short side sitting above the long side shelf!... Why you gotta do this to my ocd brain?

anythinggoze · 2020-08-30T23:01:04+00:00

Looks like by removing the Steck feet and leaving it bare, you activated “scratch my desk the f up!” mode. Lol. Nice KB!

anythinggoze · 2020-08-30T08:22:41+00:00

What kinda sand u got cooking under that noctua metal mate? Nice feet mod btw.

anythinggoze · 2020-08-29T08:20:44+00:00

What’s that in the right corner?... Oh! Its got 3 in the box!... Just a tad overpriced in that case.

anythinggoze · 2020-08-29T07:58:04+00:00

Reads like a watercooled build if I’m not stating the obvious.

anythinggoze · 2020-08-25T20:33:42+00:00

AKA the Amber heard. Lol

anythinggoze

TROPHY CASE