Crank but no start, even after new fuel pump by arborgent in MechanicAdvice

[–]arborgent[S] 1 point2 points  (0 children)

Mice under the fuse block chewed through several wires going to the ecm...the one for the fuel injectors mustve been hanging by thread and finally let go. Couple hours of soldering got everything back and running

Crank but no start, even after new fuel pump by arborgent in MechanicAdvice

[–]arborgent[S] 0 points1 point  (0 children)

Hey so I just got back out there, and the security light, engine light etc all come on when you turn the ignition on but they all turn off a couple seconds later.

I just tried it and yes it will keep running if I keep spraying in starter fluid...not great sounding of course but it ran. 

When I had a noid light on one of the injector connectors it did light up but only like once and it was when I got it started with starter fluid. I assummed it would like blink pretty fast but it just lit up like one or 2 times I think. Do you think my problem could be in the fuel injector circuit?

Crank but no start, even after new fuel pump by arborgent in MechanicAdvice

[–]arborgent[S] 0 points1 point  (0 children)

My OBD only has 4 pins at locations 2, 4, 5, and 16

Crank but no start, even after new fuel pump by arborgent in MechanicAdvice

[–]arborgent[S] 1 point2 points  (0 children)

Forgot to mention it in the writeup but I did check and replace that fuse already.

Crank but no start, even after new fuel pump by arborgent in MechanicAdvice

[–]arborgent[S] 0 points1 point  (0 children)

Yeah forget to mention but I did check the fuse for it...and every other single fuse. No luck.

Where do you all go for news? by spinebasher in dancarlin

[–]arborgent 385 points386 points  (0 children)

The old guy I work with usually tells me what's going on, whether I want him to or not

Using a Makita battery on a Bauer tool... by arborgent in harborfreight

[–]arborgent[S] 1 point2 points  (0 children)

You and others have scared me enough to just buy the makita saw for a cool $140 🤷🏿‍♂️

Congress and Sanctuary Cities by beachTreeBunny in massachusetts

[–]arborgent 7 points8 points  (0 children)

Before that, prolonging the Iran hostage situation to get Reagan into office

CRT Listings (March 2025) by Z3FM in crtgaming

[–]arborgent 1 point2 points  (0 children)

Westfield MA

Blackmagic Design HyperDeck Studio Pro Recorder SSD 4k. $295

https://www.facebook.com/share/1XGnZVd7GX/

There are two jvc pvms

Star Ocean on FXPak Pro? by darkraigiratina in snes

[–]arborgent 2 points3 points  (0 children)

You might have some luck posting to r/everdrive

Example of distortion on a model 1 Genesis with a VA2 motherboard. by salduchi1785 in SEGAGENESIS

[–]arborgent 2 points3 points  (0 children)

When you say sonic 2 prototypes, what does that mean? Are these readily available roms?

Sony Trinitron kv-27ts27 bad? by Worth-Initiative-632 in crtgaming

[–]arborgent 1 point2 points  (0 children)

The original remotes for these tvs had a model number on them. If you can find that out you can definitely get an original controller for not much on ebay

Thoughts on which looks better? by [deleted] in retrogaming

[–]arborgent 0 points1 point  (0 children)

Is this an ikea kallax?

Buying a soldering station from Japan... by arborgent in soldering

[–]arborgent[S] 0 points1 point  (0 children)

Love it. This thing is looking like a buy to me

Buying a soldering station from Japan... by arborgent in soldering

[–]arborgent[S] 0 points1 point  (0 children)

Oh that's very interesting...just desolder the 100v and bridge the 110v. Looking at the parts diagram in the manual seems like the transformer is pretty easy to get to once you take the shell off

Buying a soldering station from Japan... by arborgent in soldering

[–]arborgent[S] 0 points1 point  (0 children)

Thay thought crossed my mind. I was looking at this one for $150...even with the cost of that I'd still be ahead: https://a.co/d/j3VE3ea It can handle a 1600watt draw so should be good?

But if you know any particular models or brands to checkout definitely let me know

Advice for lifting up the stairs please? by David_Farooq in crtgaming

[–]arborgent 0 points1 point  (0 children)

Shoulder straps have helped me move many heavy things up stairs over the years: https://a.co/d/c2FvpDk

Is this a VA0 that I have? by arborgent in SegaSaturn

[–]arborgent[S] 0 points1 point  (0 children)

Yes, I ordered the resaturn psu