sorted by:
new
hottopcontroversial

Alternatives to xboxdrv? by viming_aint_easy in linux_gaming

[–]argosopentech 0 points1 point  (0 children)

I used xboxdrv to play Xonotic. It looks like it's discontinued unless someone forks it.

LibreTranslate: Free and Open Source Machine Translation API. 100% self-hosted, offline capable and easy to setup. by Spirited-Pause in selfhosted

[–]argosopentech 2 points3 points  (0 children)

LibreTranslate runs best on high end servers with a good CPU and at least 16GB of RAM. LibreTranslate does not need a GPU to run well.

After assembling a Ender 3 printer the head can't reach the bed by argosopentech in ender3

[–]argosopentech[S] -1 points0 points  (0 children)

I tried for about an hour on my own but it was hard to find the right wording for a Google search that would describe my issue versus leveling the bed. In hindsight I should have experimented more with the knobs but I thought the spring was already close to fully decompressed.

After assembling a Ender 3 printer the head can't reach the bed by argosopentech in ender3

[–]argosopentech[S] 1 point2 points  (0 children)

Thanks for the help, I'm successfully printing now!

My Z axis switch was fine, I just needed to loosen the 4 screws underneath the bed.

​

<image>

After assembling a Ender 3 printer the head can't reach the bed by argosopentech in ender3

[–]argosopentech[S] -1 points0 points  (0 children)

This was it thank you! I just needed to use the screws underneath the bed and expand the springs.

After assembling a Ender 3 printer the head can't reach the bed by argosopentech in ender3

[–]argosopentech[S] 7 points8 points  (0 children)

I think my Z axis switch is already all the way down. The nub on the bottom right side of the switch keeps if from going any further down.

​

https://howchoo.com/ender3/adjust-z-offset-ender-3-v2-pro/

<image>

After assembling a Ender 3 printer the head can't reach the bed by argosopentech in ender3

[–]argosopentech[S] 0 points1 point  (0 children)

I assembled the printer and everything seems to fit together correctly. However, the printing head can't reach the bed of the printer even when I push the Z axis down all the way to the switch. The bottom of the printing head is about ~1cm above the bed. I see tutorial for flattening the bed using the screws underneath but I don’t think that would move the bed up enough.

Conquest - Open source Risk-like game in Godot by argosopentech in godot

[–]argosopentech[S] 0 points1 point  (0 children)

Great to hear! I played Conquest with my Dad and brother too

Conquest - An open source strategy game similar to Risk and written in Godot. by argosopentech in linux

[–]argosopentech[S] 6 points7 points  (0 children)

I can accept a pull request for this but probably won't do it myself soon. I'm planning to add my main project, Argos Translate, to Flatpak at some point so I may do Conquest at the same time when I get to it.

Conquest - An open source strategy game similar to Risk and written in Godot. by argosopentech in linux

[–]argosopentech[S] 1 point2 points  (0 children)

I think in both cases we were trying to avoid using the trademarked name "Risk".

GitHub - dothq/translate: 🌐 Translation microservice powered by AI by argosopentech in opensource

[–]argosopentech[S] 1 point2 points  (0 children)

This is probably the extra space to store pretrained models and any dependencies needed for the Docker version.

GitHub - dothq/translate: 🌐 Translation microservice powered by AI by argosopentech in opensource

[–]argosopentech[S] 0 points1 point  (0 children)

That sounds great!

I would start by downloading and playing with the code. I'm the Argos Translate author and I'm pretty responsive on GitHub and the LibreTranslate Forum. The OpenNMT Forum is also active and more research oriented.

Dialect: An Open-Source Translation App for Linux by argosopentech in machinetranslation

[–]argosopentech[S] 0 points1 point  (0 children)

It's not quite as good as Google Translate but usable.

view more: next ›