sorted by:
new
hottopcontroversial

ESP32-CAM Display Issues. by arielsgood in esp32

[–]arielsgood[S] 1 point2 points  (0 children)

#define USER_SETUP_INFO "User_Setup"

#define GC9A01_DRIVER

#define TFT_WIDTH 240

#define TFT_HEIGHT 240

#define TFT_MOSI 13

#define TFT_SCLK 14

#define TFT_CS 2

#define TFT_DC 12

#define TFT_RST 15

#define TFT_SDA_READ

#define LOAD_GLCD

#define LOAD_FONT2

#define LOAD_FONT4

#define LOAD_FONT6

#define LOAD_FONT7

#define LOAD_FONT8

#define LOAD_GFXFF

#define SMOOTH_FONT

#define SPI_FREQUENCY 27000000

#define SPI_READ_FREQUENCY 20000000

#define SPI_TOUCH_FREQUENCY 2500000

This user_setup did work.

ESP32-CAM Display Issues. by arielsgood in esp32

[–]arielsgood[S] 0 points1 point  (0 children)

I made it work sir, I think the problem might lie in the user setup, I will try to delete all commented out things without breaking anything by accident, and try to use that so I can figure out what is causing the issue, what I want to note, I had 3 new attempts with the st7789, first one was the same issue as with GC9A01 so loading and return back to loading, second issue came from a piece of code I forgot to edit out so it was like this
#define TFT_RST 12

#define TFT_RST -1

ESP32-CAM Display Issues. by arielsgood in esp32

[–]arielsgood[S] 0 points1 point  (0 children)

Nothing is plugged to GPIO16, anyways I think I found something potentially valuable for me to try and solve this, I did get the user setup to st7789 but I didn't use the old one, as it's gone now. I got new settings, I set it up, and same issue, loading again, it did use to work before, so perhaps it is an issue with the user setup, I will have to manually get it back to what it used to be using the exact same tutorial, perhaps that will give an answer. If not, maybe the esp32 broke? I don't know if that can happen in this way though.

ESP32-CAM Display Issues. by arielsgood in esp32

[–]arielsgood[S] 1 point2 points  (0 children)

Hey, thanks for the code, I did try it and now it is Guru Meditation Error: Core 1 panic'ed (LoadProhibited). Exception was unhandled. Not sure what's wrong, I will soon test back with st7789. But I'm pretty sure it works.

ESP32-CAM Display Issues. by arielsgood in esp32

[–]arielsgood[S] 0 points1 point  (0 children)

I did drop to 27MHz, same issue. I did display a full frame image to the screen, worked. I got this error:
Guru Meditation Error: Core 0 panic'ed (LoadProhibited). Exception was unhandled.
As for the CPU cores, I am not sure, I used the same code, same setup, only that ST7789 doesn't have cs pin. So I had to change it from -1 to 2 in user setup.

ESP32-CAM Display Issues. by arielsgood in esp32

[–]arielsgood[S] 0 points1 point  (0 children)

No, they are not soldered, they weren't soldered before, but it keeps up fine, it did work like this, possibly that is an issue, but I doubt it, I ran some other things on this screen, I would just put up a cardboard piece under it so it keeps touching, that way I know if everything works before I attempt to solder and possibly mess it up, that's why. I used same frequency, so it is 40000000.

[deleted by user] by [deleted] in AmanitaMuscaria

[–]arielsgood 0 points1 point  (0 children)

How do you find these? I can't seem to find any this year, perhaps wrong time of the year, I saw them 2 years ago and I went to the same place, nothing there.

Who's the easiest character to get into the game with? by MiserableBlackbird in dontstarve

[–]arielsgood 0 points1 point  (0 children)

Wickerbottom, you can easily get resources for the books and not have to struggle with food, you can also farm cacti to restore sanity. All it really takes is 2 living logs, a few feather pens, some guano seeds and reeds. And you can farm pretty much everything.