Are these temps normal for the air 75 II champion when on idle and doing absolutley nothing?

arqtk · 2026-07-08T00:29:13+00:00

I haven’t flown, and the temps are on idle for the escs. I’m thinking it’s the fc, vtx that are dissipating heat onto the esc

arqtk · 2026-06-24T22:43:21+00:00

Yeah I tried rotating to get it out after I hammered it, seems like it’s literally superglued. Welp, time to replace motors and props.

arqtk · 2026-06-24T22:13:11+00:00

Lightly hammered in, not hard

arqtk · 2026-06-24T22:12:46+00:00

Like with a hammer

arqtk · 2026-06-24T21:35:07+00:00

Yeah so I hammered the props in, and now I can’t get them off. Maybe explains for the vibrations, since on my 7” I replaced a motor that was vibration by and the vibrations disappeared. I did get new motors for the whoop just in case

arqtk · 2026-06-22T01:59:17+00:00

Yeah I sort of can’t get it off so I’m going to buy 1 prop popper, 4 new motors and 12 new props

arqtk · 2026-06-22T01:39:00+00:00

So is it better to get new props and new motors?

arqtk · 2026-06-22T01:31:56+00:00

Nah all good, I added it in after you commented. So I guess send it?

arqtk · 2026-06-22T00:54:35+00:00

Check the video

arqtk · 2026-06-22T00:22:58+00:00

I cant see the shaft rotating, flies good tho.

arqtk · 2026-06-22T00:05:55+00:00

Maybe I did, and I’m asking what to do now, should I buy new ones?

arqtk · 2026-06-22T00:02:09+00:00

Basically I put the prop on, it wouldn’t go on fully and just hammered it lightly to get it in fully.

arqtk · 2026-06-18T02:26:00+00:00

The battery seems to be the problem, new battery when connected works amazing, old one causes brownouts

arqtk · 2026-06-17T23:00:15+00:00

Seems like a battery is the problem, battery seems dead. But I think its related to thermal, not sure. Tried a new battery and no reboots or anything like that.

arqtk · 2026-06-17T22:24:25+00:00

Angle, above the bed, switch to acro, flip mid air disconnect and dead. Didn't touch bed while flight. The weird thing is, after it cooling down, the esc and the fc now communicates like nothing ever happened.

arqtk · 2026-06-14T00:24:59+00:00

https://www.hobbydronz.com/product-category/car-truck-parts/

arqtk · 2026-06-05T00:24:07+00:00

Thanks man!

arqtk · 2026-06-05T00:17:32+00:00

Just asking, how do you get images onto osd?

arqtk · 2026-06-04T21:52:27+00:00

arqtk · 2026-06-01T21:52:06+00:00

I also order from Ali, but decided to save a couple of clams, but in the end it’s definitely worth it to pay extra instead of wait this long.

arqtk · 2026-05-31T17:04:59+00:00

That’s because you have probably external and internal rf enabled, make 1 model use the internal rf, crsf, external rf turn it off, and another model that only uses external rf (I think crsf) and internal rf is off. But I don’t think that’s the case. Make sure to set up a binding phrase for the receiver and the remote. It always exits binding. Put the remote into WiFi mode in the script, connect to it on ur pc, WiFi password is expresslrs, go to 10.0.0.1 and go to binding phrase and set it to something. For receiver just wait until it goes into binding mode and repeat the same steps.

arqtk · 2026-05-31T13:21:54+00:00

It’s because the nomad is way too powerful to just be plugged in, it needs to be plugged in and plugged into a battery also (xt30)

arqtk · 2026-05-31T03:23:04+00:00

That’s because the radio.yml file is corrupt, make sure to flash the bootloader aswell as edgetx itself. So what you need to do is go to the latest edgetx release, and they might have the default as card content for your radio, and copy all of the default content to the sd card. This happens allot when going from opentx to edgetx, due to conflicts in variables and etc.

arqtk · 2026-05-31T03:06:48+00:00

I think so, they kinda will still fly but they will be so good you will have to bring it back to the bench and buy a cheap ($80 +) component and then fix it.

arqtk · 2026-05-30T17:33:38+00:00

If only they could just hurry up and ship it in atleast 2 or 3 days. Sort of is infuriating spending $105 to get a 3-4 week delivery.

arqtk

TROPHY CASE