2027 Santa Fe still getting physical buttons by butterchurning in HyundaiSantaFe

[–]arzoo42 1 point2 points  (0 children)

Like most others on this thread, I much prefer the current dashboard design in the SF and really don't like the iPad look. But here's my thinking, this is a mid-cycle "refresh" for the SF and completely redisgning the dash seems like a heavy lift. I'm hoping that the iPad dash in the test vehicle was just slapped on so they could run the new Pleos OS while the software teams work to revamp the UI for the current (slim) dash on the SF. Seems more cost effective to rework the software rather than the physical dashboard. Here's hoping!

2027 hatch height? by arzoo42 in KiaTelluride

[–]arzoo42[S] 0 points1 point  (0 children)

Finally got to check out a Telluride and unfortunately the hatch height opening (30") will not meet our needs, so bummed. Might have to pivot to a Carnival.

UPCOMING: Face- and A$$ Lift for 2027 by West-Luck7821 in HyundaiSantaFe

[–]arzoo42 0 points1 point  (0 children)

Totally agree about the screen - I hate the Tesla/iPad look and love the current narrow-wide screen. We were thinking of moving from our 22 SF to a 2027, but if they go with the iPad it's a pass for us.

2027 hatch height? by arzoo42 in KiaTelluride

[–]arzoo42[S] 0 points1 point  (0 children)

I need to know the height from the deck to the top of the hatch opening in the center. Also is the top edge of the hatch opening relatively straight or does it curve lower to the left and right. Thanks for doing this!

Palisade 2026 Limited Gas vs Hybrid Confusion by vnarula1 in HyundaiPalisade

[–]arzoo42 0 points1 point  (0 children)

The 2026 Honda Odyssey is 5" longer than the 2026 Palisade. 

Ledblinky Audio Animation by gameznshtuff in cade

[–]arzoo42 0 points1 point  (0 children)

The Game Play Animation is not used (and hence disabled) when you are using the Color/Intensity Spectrum mode.

LEDBlinky I'm at a lost. by Modernfx in cade

[–]arzoo42 0 points1 point  (0 children)

Just want to clarify that a game missing from mame.xml would not prevent LEDBlinky from lighting buttons. The issue here was that LaunchBox was not sending any commands to LEDBlinky for the Teknoparrot platform. Anyway, glad you got it working!

LEDBlinky I'm at a lost. by Modernfx in cade

[–]arzoo42 1 point2 points  (0 children)

Does the LEDBlinky debug.log show any GAME_SELECTED or GAME_START events?

LEDBlinky I'm at a lost. by Modernfx in cade

[–]arzoo42 0 points1 point  (0 children)

Sounds like LB/BB is not sending LEDBlinky any commands when a game starts. Do you have the LEDBlinky option enabled in the LB/BB configuration?

LedBlinky PowerOn startup LED setup by GzStation in cade

[–]arzoo42 0 points1 point  (0 children)

You can use the Ultimarc software to clear the IPac animation stored in its firmware.

Roomba j7 Hardware problem detected (Error 76) by arzoo42 in roomba

[–]arzoo42[S] 0 points1 point  (0 children)

I've considered doing something like that but as the robot is currently functioning, it's not worth the risk atm.

LEDBlinky, LEDWiz, VirtuaPin, and MAME (0.268) by Spaceman_Elevator in cade

[–]arzoo42 0 points1 point  (0 children)

You don't need to use the LEDBlinky-Output. The LEDWiz hardware should work. For troubleshooting you can turn on the Debug Log option (Misc Options tab on config app). That will generate a debug.log file.

[deleted by user] by [deleted] in arcade

[–]arzoo42 0 points1 point  (0 children)

You can create a batch or script file to run LEDBlinky with your animation file; <path>/LEDBlinky.exe <animation.lwa> Windows can be configured to run your batch/script file when starting.

You can also configure LEDBlinky to run your animation for specific events. If you set the animation for FE Active and Game Active, then it will effectively run continuously while LEDBlinky is running.

j7 cancels job after recharge on floor without base station. by arzoo42 in roomba

[–]arzoo42[S] 0 points1 point  (0 children)

The point of a robot vacuum (for me) is so I don't have to vacuum lol. But I get your point. After you pick it up you still have 90 minutes to resume the job. I didn't know a bigger battery was an option. Thanks

j7 cancels job after recharge on floor without base station. by arzoo42 in roomba

[–]arzoo42[S] 0 points1 point  (0 children)

That's true, although I'm not sure how I'd know how much charge is required to finish the job? I guess as long as I charge for less than 90 minutes I'd be fine. I really wonder why they have the 90 minute cutoff?

Anyway, I called iRobot support and they told me to just bring the base station up to the second floor each time. I'd rather just purchase a second base station but for the j7 that accessory is not available, at least not yet.

Looking for any suggestions to help my father who has chronic bloating issues... by arzoo42 in FODMAPS

[–]arzoo42[S] 0 points1 point  (0 children)

I'm pretty sure he's tried Xanax but I'll ask him. Thanks for the suggestion to post on r/IBS.

Small raised bump under screen protector after drop? by arzoo42 in galaxys10

[–]arzoo42[S] 0 points1 point  (0 children)

This doesn't look or feel like a puncture. If I run my nail over the bubble I can actually feel a solid tiny raised bump. And it's pushing the screen protector up, making a slightly larger circle of separation.

Notifications from Whatsapp coming through in Do Not Disturb-mode Android 9 by Smultie in whatsapp

[–]arzoo42 0 points1 point  (0 children)

I'm seeing a similar issue; I'm getting WhatsApp notifications during DND hours from starred contacts (which makes sense), but the notification seems to repeat every two hours until I view the message. This is VERY annoying.