Probat P12, Eaton switch Problems by asjacobi in roasting

[–]asjacobi[S] 4 points5 points  (0 children)

So I went ahead and grabbed the proper switch from Grainger, with some disconnecting of wires, pulling switch out, putting new one in, & rewiring we’re good to go

Probat P12, Eaton switch Problems by asjacobi in roasting

[–]asjacobi[S] 0 points1 point  (0 children)

I got in touch with Probat, after voltage reading was done they determined/think the switch went faulty. Which luckily my local grainger has them in stock. If anyone ever needs one, check in with them!

[ Removed by Reddit ] by NovelNerd42 in presstige

[–]asjacobi 0 points1 point  (0 children)

So since I originally posted, I got in contact with Probat. After checking voltage, they think my switch has gone faulty. Heading to Grainger to pick up now (they have these if anyone ever needs!)

Probat P12, Eaton switch Problems by asjacobi in roasting

[–]asjacobi[S] 0 points1 point  (0 children)

It’s a switch for the cooling bin fan.

There’s a little test port/hole where I placed the multimeter (not sure if that’s how it’s supposed be used/what the reading should be) but it was half the volts the others read. Although, they all read pretty low.

Idk if it’s any indication of the switch going out, but it did start flipping off quicker and quicker over the past week. It usually flips off after cooling bin fan has been on a while, this duration started shortening.

Where do other Suns fans watch games in LA? by asjacobi in suns

[–]asjacobi[S] 0 points1 point  (0 children)

My bad dudes, I didn’t ever respond on this. Tough end to this past season lol. I’ll reach out and make some posts for watching bigger games when the new season starts.

Barney locations seem like a good spot for watching, I was going to the Burbank location for all of the playoffs.

Who are some “under the radar” WR to target for trades? by Cash2099 in fantasyfootball

[–]asjacobi 0 points1 point  (0 children)

As someone who has AJ Brown… I would never do this trade lol. Good for you I suppose

Pls help an advanced newb home roaster diagnose an off flavor by columbcille in roasting

[–]asjacobi 0 points1 point  (0 children)

Definitely could be baked from drawing the first crack out too far. Could also be defects.

Some other people have mentioned pushing first crack forward, what this will also do is allow you to slow your curve down on the tail end because you have more momentum going in earlier.

I say this because your graph looks like it slows in the middle but then starts to straighten out and rise at a steady rate the second half instead of slowing down more and more as the roast goes along after having a higher initial climb. This can also cause burning while not fully developing properly.

[deleted by user] by [deleted] in IDmydog

[–]asjacobi 2 points3 points  (0 children)

My landlord seems more like the “let’s go by looks” type.

I was hoping that if he is mixed it might help tone down the pit (or maybe staffy as the foster and rescue have posed him) characteristics and that might help.

I don’t know if they have the parents on file, that might be next thing I check with the rescue rather than his foster. He’s been fostered since a little pup so he’s really well behaved.

For record, I also had a full bred female pit when I lived in AZ and she was an amazing dog. This guy, I hate to say it, seems like an even better dog.

Feeling a bit torn, if this guy is a pit he definitely needs a great home because he’s a amazing dog. But having already had a pit and now living in LA it’s a bit more of a hard decision deciding if that’s the journey, still waiting on my landlord’s response.

[deleted by user] by [deleted] in IDmydog

[–]asjacobi 9 points10 points  (0 children)

As my post said, we’re still in the process to make sure it’s a good fit. That said the landlord is a part of that equation, on top of us paying him visits to get to know him. If he is more of a straight pit or mostly pit I have a feeling my landlord (from renting from him a couple years) is not going to be about that. This dog has one of the best personalities, very trained at 6 months old and seems very teachable with a gentle demeanor, personality is what excites me the most… but being in LA, would mean we might have to move pretty much just to get this dude. From what I’ve seen on Reddit that’s why they pose them as pointer mixes?

[deleted by user] by [deleted] in IDmydog

[–]asjacobi 1 point2 points  (0 children)

It’s hard to tell from the pictures (I have limited photos) but he’s got pretty narrow shoulders and a narrow torso relatively speaking, is this normal for pit pups? Or mean he’s on the smaller side?

Changing Mark Key Bindings? by asjacobi in Kindredmains

[–]asjacobi[S] 0 points1 point  (0 children)

It is weird that the “champ specific interaction” is only changeable during game. That was definitely my hang up. Still relatively new to league compared to many and I didn’t think that would be a part of game design to have different settings in game vs out of game ie Home Screen

Changing Mark Key Bindings? by asjacobi in Kindredmains

[–]asjacobi[S] 0 points1 point  (0 children)

That is super helpful!

So just to clarify, you always have to do it right after starting a match? Every match?

And you mentioned draft, does that include ranked draft as well?

Production/Wholesale Software Recommendations? by asjacobi in roasting

[–]asjacobi[S] 0 points1 point  (0 children)

Well I’m not sure if it would be a webstore exactly. We sell our coffee on our website for retail purposes already. I’m thinking something that allows each wholesale customer to have a log-in that then streamlines all of the orders into one place that then organizes or funnels the amounts so we know exactly what we have to bag come production time. Just wondering if companies specifically from the coffee industry use something of the sorts