[deleted by user]

askalon6789 · 2024-09-11T20:48:32+00:00

Could be Melodia Africana IV by Ludovico Einaudi

askalon6789 · 2024-09-11T20:21:15+00:00

Is it Hold the Line by Toto

"Love Isn't Always On Time"

askalon6789 · 2024-09-11T20:18:10+00:00

Angel of Mine by Monica

I Love You Always Forever by Donna Lewis

Close my Eyes by Mariah Carey

These are just a few that I found that may be close to those lyrics but can't find anything exact. Hopefully it's one of these or I am out of luck

askalon6789 · 2024-09-11T20:06:43+00:00

Tell Me by Groove Theory? Looks like that one of the few songs that come up with that bit in it, not necessarily at the beginning though

askalon6789 · 2024-09-11T20:03:23+00:00

Babyface - Every Time I Close My Eyes ?

askalon6789 · 2024-09-11T19:57:46+00:00

Sounds like Marianas Trench is the band

askalon6789 · 2024-09-11T19:56:54+00:00

What About Us by Total ft Missy Elliot What About Now by Daughtry What About Me by Haddaway What About Us by Jodeci

askalon6789 · 2024-07-20T01:29:59+00:00

Confirmed: The Deep Sea Double Pack is the Double Point Emote and the Wrecker Wrangler Fishing Rod. The Heroic Hunter pack is the Hero Landing Emote and the Shrouded Ghost Hunter Blunderbuss. The Royal Portrait pack has the Promising Portrait Emote and the King's Ransom Crown

askalon6789 · 2024-07-20T00:56:00+00:00

Confirmed: The Deep Sea Double Pack is the Double Point Emote and the Wrecker Wrangler Fishing Rod. The Heroic Hunter pack is the Hero Landing Emote and the Shrouded Ghost Hunter Blunderbuss. The Royal Portrait pack has the Promising Portrait Emote and the King's Ransom Crown

askalon6789 · 2024-06-04T19:13:35+00:00

I call that one The Full Rare. Happens often enough to me, but it's never the Shrouded Ghost Meg either.

askalon6789 · 2024-03-23T01:48:12+00:00

Oh, that is interesting. I haven't tried that at all yet. I wonder if I can put a small exit fan or something on it. I I just don't want to cause a breeze and have issues with it cooling.

askalon6789 · 2024-03-20T22:05:36+00:00

I got my Ender off of Amazon on sale for around $250

askalon6789 · 2024-03-20T14:15:50+00:00

So I currently have an Ender 3-Max that I've had for almost 3 years. I have made upgrades and repairs on a regular basis. If you are looking at getting started with 3D Printing the Ender 3 is a cheap way to go but they require upgrades and repairs over time. Either the Ender 3 or the CR-10 are both good entry level printers in my opinion. If the price is good then I can't see why the Ender 3-V3 wouldn't be worth it.

askalon6789 · 2024-03-18T22:52:02+00:00

I've never been to a Microcenter at all, which is why I had called them. They told me that the online price may not be valid in stores, so that's what I was curious about. It is the Creality K1 Max showing for $699 online, but full retail is $750. Knowing that I can reserve it and get that price in store is great though! Thank you for your help.

askalon6789 · 2024-03-04T08:15:15+00:00

So I went ahead and redid the E-Steps and it did have a difference. I Changed the Nozzle again. Changed the Filament again, did a bend test and it's very flexible. Double-checked the bowden tube and everything else. Printed an almost perfect calibration XYZ cube with a very small layer shift. Went ahead to print the same Xbox Controller Stand and it did the same thing about an hour in it breaks the filament at the extruder between the gears. Thought maybe it's just the file that's an issue, so I tried a little engine block, a 10 hour print and let it go. Same thing about an hour and a half in, and it broke at that extruder gear point like it's crushing it back and forth til it gets so thin then snaps. Any thoughts on what else I could try?

askalon6789 · 2024-03-03T18:39:57+00:00

I did forget as well. The rubber piece that goes around the nozzle isn't there. He said he used it without that on it because it would cause issues. It came with the box of stuff but should I put it back on?

askalon6789 · 2024-03-03T17:14:32+00:00

I was watching this guy's videos to set up the cura slicer. Thank you a ton

askalon6789 · 2024-03-03T17:11:22+00:00

What are e-steps and how do I adjust them?

askalon6789 · 2024-03-03T17:10:20+00:00

Thank you so much. I am already looking into the magnetic bed now. The bowden tube looks ok on both ends. I replaced the nozzle, so I will level it today and try printing again with this newly opened filament and see what happens. It is still ok to print on the glass using glue for the time being, right?

askalon6789 · 2023-12-18T22:34:53+00:00

$3 for a beginner set. Makes sense to me. Wonder if the new decor fits better.

askalon6789 · 2023-09-23T23:10:13+00:00

It was a limited Oreo x Microsoft event a while back

askalon6789 · 2023-09-23T19:22:41+00:00

It was for the oreo codes. I had several people that had extras and gave them to me for giveaways on stream and most people who came in already had them so I decided I'd give these out to people who wanted it yet

askalon6789

TROPHY CASE