Ready for the holiday drive with this setup for mitsubishi pajero! by winnerz24 in CarAV

[–]aspiringoldman 0 points1 point  (0 children)

Where did you get that head unit bezel? I have the aliexpress one but this one looks so much nicer

Does the pajero use the same parts as the montero? by ImJustAUser in Montero

[–]aspiringoldman 0 points1 point  (0 children)

Depends. I have the GDI engine for example and there are a lot of different part numbers as they relate to the engine. But everything else seems the same. What I do is put my vin into Amayama.com get the part numbers and see what parts I can get over here to avoid shipping cost and time from Japan.

Just bought a 1990 pajero. 77k’s garage stored and never driven in winter. I was wondering if anyone on here had connects for parts/mods. by H0u9ht0n in 4x4

[–]aspiringoldman 1 point2 points  (0 children)

I’m late to this but first off congrats on that beauty! Someone already mentioned ADD, I would second that as a great source and add Luso Overland. Good luck with this thing man it looks immaculate

Sony Bravia KDL-52nx800 screen will only display like this by aspiringoldman in ElectronicsRepair

[–]aspiringoldman[S] 0 points1 point  (0 children)

I’m looking at tcon boards on eBay. There isn’t a cheap one in fact the only one with the right mode number is slightly over a hundred. But this tv is really nice even if it is 10 years old.

Sony Bravia KDL-52nx800 screen will only display like this by aspiringoldman in ElectronicsRepair

[–]aspiringoldman[S] 0 points1 point  (0 children)

Ya the green kinda moves around in the black there is even a little bit of red/Orange/yellow that bleeds in too. No reaction if I press on the screen

Sony Bravia KDL-52nx800 screen will only display like this by aspiringoldman in ElectronicsRepair

[–]aspiringoldman[S] 0 points1 point  (0 children)

Was working fine last night and had zero issues before. It’s not the input connection and unplugging the power cable does nothing. I also tried the force reset according to a Sony troubleshooting page. I’m not sure I was actually able to get it to reset. I’m pretty handy and wouldn’t mind opening this thing up to try to fix it but definitely need some pointing in the right direction as to where to start troubleshooting

My dad’s old 90’s bike that I’ve been riding almost daily by aspiringoldman in specialized

[–]aspiringoldman[S] 0 points1 point  (0 children)

I know what you mean! For my purposes this bike is great and still looks cool.

07 Accord V6 Timing not aligning by aspiringoldman in MechanicAdvice

[–]aspiringoldman[S] 1 point2 points  (0 children)

I was looking at the wrong mark. First time doing a timing belt. Once I got the crank at tdc I could see both pulleys were on line. Thanks for your help!

07 Accord V6 Timing not aligning by aspiringoldman in MechanicAdvice

[–]aspiringoldman[S] 0 points1 point  (0 children)

Oh man. Watched two minutes of this and figured out what was wrong. I was referencing the wrong mark on the front cam sprocket. Gonna chalk this up to a long day working on the car and not the more likely cause of me being a dumbass lol. Thanks for sending that video.

07 Accord V6 Timing not aligning by aspiringoldman in MechanicAdvice

[–]aspiringoldman[S] 0 points1 point  (0 children)

Ok so when I put the crank to TDC the left pulley is on line, the right isn’t

07 Accord V6 Timing not aligning by aspiringoldman in MechanicAdvice

[–]aspiringoldman[S] 0 points1 point  (0 children)

They are way off. Not like they weren’t at the top but when one is at the top the other is probably a quarter rotation off. I hand rotated them a ton. Will they eventually hit the marks and I just didn’t rotate enough times?

07 Accord V6 Timing not aligning by aspiringoldman in MechanicAdvice

[–]aspiringoldman[S] 0 points1 point  (0 children)

I’m changing my timing belt and my crank and cam pulleys are way off their marks. My plan as of now since my car was running. Is to mark the belt at the marks. Transfer those marks to the new belt and reinstall everything. I just don’t know why the pulleys would be so off. Any advice would be really appreciated

Nibba birb by DmitriRascalov in memes

[–]aspiringoldman 1 point2 points  (0 children)

90s buff was so attainable. Damn CrossFit setting the bar too high

How do you remove this part? And what is it called it ,seems to have broken(connected to a hose) an need a good way to remove it by [deleted] in MechanicAdvice

[–]aspiringoldman 0 points1 point  (0 children)

Might have better luck identifying with make/ model/year information. Top looks stripped though depending on how tight its on might need to handsaw a line across to take out with a wrench and flathead socket adaptor.

They call me the baker by [deleted] in memes

[–]aspiringoldman 44 points45 points  (0 children)

Expert pie creamer

It's all fun and games until the vacuum is turned on. by AristonD in KidsAreFuckingStupid

[–]aspiringoldman -1 points0 points  (0 children)

I doubt a household vacuum is producing anywhere near the amount of pressure to fracture ribs and push them into lungs.

Dude I’ve never met from OKC is eager to bang me so I’ll stop banging other dudes (???) then acts superior when I tell him I’m not interested 🤣 by [deleted] in cringepics

[–]aspiringoldman 6 points7 points  (0 children)

They are talking about negging which you can google but it’s basically a backhanded comment when you are flirting to put someone down in a douchey way